Low-cycle fatigue properties of eutectic solders at high temperatures

This paper details the deformation mechanism and low‐cycle fatigue life of eutectic solder alloys at high temperature (around 0.8T_m). Grain boundary sliding generally nucleates a wedge‐type cavity that reduces the low‐cycle fatigue life of metals. In this study, grain boundary sliding has promoted intergranular failure contributing to the reduction in fatigue life of Sn–Ag–Cu alloy. However, grain boundary sliding has exerted no deleterious effects on fatigue resistance of eutectic Pb–Sn and Bi–Sn alloys. The phase boundary sliding with very fine microstructure induces exceptional ductility in these alloys leading to superior low‐cycle fatigue endurance for theses eutectic Pb–Sn and Bi–Sn alloys.     

In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

RD取样器及其应用

RD取样器是在APR-M2工具基础上发展起来的专用取样设备，由取样心轴、取样外筒、破裂盘、样品腔几部分组成。与RD安全循环阀配合使用，完全可以替代APR-M2工具，具有取样准确、缩短施工工期，取样过程简单、安全等特点。     

Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.     

Prolog逻辑程序的测试方法

Prolog逻辑程序设计语言具有不同于传统程序设计语言的特点.本文根据测试Prolog程序的实践,提出了一系列为Prolog程序生成测试用例的准则.按这些准则测试实际程序效果良好.这是在逻辑程序测试新领域迈出的一步.     

ATM协议的测试研究及其应用

协议一致性测试和互操作性测试是保证不同厂商的ＡＴＭ产品和服务实现完全的互通的重要技术手段，本文分析了ＡＴＭ协议的测试需求，提出了适合的测试结构和测试描述技术，并结合适配层协议ＣＰＡＡＬ５讨论了协议集成测试系统ＰＴＴＳ在ＡＴＭ协议测试中的应用。     

用不稳定试井资料研究油藏储集层流动系统模式：以准东油区为例

从不稳定试井Ｈｏｒｎｅｒ曲线形态分类入手，结合油藏动态特征对油藏储集层流动系统进行分类，并初步确定出各类流动系统的特征参数及其相应的开采特点。根据不稳定试井Ｈｏｒｎｅｒ曲线形态，可以把相应的储集层流动系统划分为三大类（孔隙流动系统、双重介质流动系统、裂缝流动系统）五个亚类。特别提出了双重介质孔缝串并流动系统组合模式。这无论对新区开发方案的编制，还是老区开发政策的制定都具有重要的借鉴参考价值。     

变井储系数的确定方法及其在反褶积分析中的应用

中针对变井储试井分析问题，给出了确定变井储系数及计算续流量的方法，并用反褶积分析积分析方法解释了未出现径向流的早期测压数据，给出了解决早期试井资料分析问题的有效方法。