Assessment of indoor HONO formation mechanisms based on in situ measurements and modeling

The photolysis of HONO has been found to be the oxidation driver through OH formation in the indoor air measurement campaign SURFin, an extensive campaign carried out in July 2012 in a classroom in Marseille. In this study, the INCA‐Indoor model is used to evaluate different HONO formation mechanisms that have been used previously in indoor air quality models. In order to avoid biases in the results due to the uncertainty in rate constants, those parameters were adjusted to fit one representative day of the SURFin campaign. Then, the mechanisms have been tested with the optimized parameters against other experiments carried out during the SURFin campaign. Based on the observations and these findings, we propose a new mechanism incorporating sorption of NO₂ onto surfaces with possible saturation of these surfaces. This mechanism is able to better reproduce the experimental profiles over a large range of conditions.     

Phosphorus flame retardants in indoor dust and their relation to asthma and allergies of inhabitants

Organophosphate esters are used as additives in flame retardants and plasticizers, and they are ubiquitous in the indoor environment. Phosphorus flame retardants (PFRs) are present in residential dust, but few epidemiological studies have assessed their impact on human health. We measured the levels of 11 PFRs in indoor floor dust and multi‐surface dust in 182 single‐family dwellings in Japan. We evaluated their correlations with asthma and allergies of the inhabitants. Tris(2‐butoxyethyl) phosphate was detected in all samples (median value: 580 μg/g in floor dust, 111 μg/g in multi‐surface dust). Tris(2‐chloro‐iso‐propyl) phosphate (TCIPP) was detected at 8.69 μg/g in floor dust and 25.8 μg/g in multi‐surface dust. After adjustment for potential confounders, significant associations were found between the prevalence of atopic dermatitis and the presence of TCIPP and tris(1,3‐dichloro‐2‐propyl) phosphate in floor dust [per log₁₀‐unit, odds ratio (OR): 2.43 and 1.84, respectively]. Tributyl phosphate was significantly associated with the prevalence of asthma (OR: 2.85 in floor dust, 5.34 in multi‐surface dust) and allergic rhinitis (OR: 2.55 in multi‐surface dust). PFR levels in Japan were high compared with values reported previously for Europe, Asia‐Pacific, and the USA. Higher levels of PFRs in house dust were related to the inhabitants' health status.     

Endotoxin levels in settled airborne dust in European schools: the HITEA school study

Indoor exposure to microbial agents is known to influence respiratory health. Besides home exposure, exposure in schools can affect respiratory health. In this study, we measured endotoxin in settled dust in primary schools in three European countries from three different geographical regions with different climates. Our aim was to characterize endotoxin levels in primary schools and evaluate associations with potential determinants. Endotoxin levels were repeatedly assessed in 23 schools in Spain (n = 7), the Netherlands (n = 10), and Finland (n = 6) using electrostatic dustfall collectors. In total, 645 measurements were taken in 237 classrooms. Endotoxin levels differed significantly between countries; Dutch schools had the highest levels, while Finnish schools showed the lowest levels. In each country, differences in endotoxin levels were observed between schools and over the sampling periods. Estimates improved after adjustment for sampling period. Factors affecting endotoxin levels in a school differed per country. In general, endotoxin levels were higher in lower grades and in classrooms with higher occupancy. School endotoxin levels may contribute significantly to total endotoxin exposure in children and teachers. As the correlation between the repeated measurements is reasonable, single endotoxin measurements form a reasonable basis for estimating annual endotoxin levels in schools.     

Maintenance and emergency management with an integrated indoor/outdoor navigation support

Large and complex infrastructures as industry plants and hospitals are vulnerable to natural, man-made disasters, and causality events. In this paper, we present a solution addressing the guiding personnel during maintenance and/or emergency conditions. The aim is to reduce the time needed to react and to cope with organization and maintenance support, while facilitating communication, and indoor/outdoor navigation. The solution is based on the formalization of protocol, the modelling of knowledge for navigation, the algorithms and the development of a mobile application and corresponding server device for integrated indoor/outdoor navigation. The navigation algorithms are based on low costs mobile sensors and Adaptive Extended Kalman Filter. The solution has been validated and tried out within a large medical infrastructure, thus demonstrating the validity of the identified modalities and procedures, measuring the advantage from both qualitative and quantitative aspects. The indoor navigation solution has been compared with other former solutions based on classical Kalman and dead reckoning.     

Guidelines and recommendations for indoor use of fuel cells and hydrogen systems

Hydrogen energy applications often require that systems are used indoors (e.g., industrial trucks for materials handling in a warehouse facility, fuel cells located in a room, or hydrogen stored and distributed from a gas cabinet). It may also be necessary or desirable to locate some hydrogen system components/equipment inside indoor or outdoor enclosures for security or safety reasons, to isolate them from the end-user and the public, or from weather conditions.Using of hydrogen in confined environments requires detailed assessments of hazards and associated risks, including potential risk prevention and mitigation features. The release of hydrogen can potentially lead to the accumulation of hydrogen and the formation of a flammable hydrogen-air mixture, or can result in jet-fires. Within Hyindoor European Project, carried out for the EU Fuel Cells and Hydrogen Joint Undertaking safety design guidelines and engineering tools have been developed to prevent and mitigate hazardous consequences of hydrogen release in confined environments. Three main areas are considered: Hydrogen release conditions and accumulation, vented deflagrations, jet fires and including under-ventilated flame regimes (e.g., extinguishment or oscillating flames and steady burns). Potential RCS recommendations are also identified.     

Characterization of polymer bulk heterojunction photocell with unmodified C70 prepared with halogen-free solvent for indoor light harvesting

Although photocells are commonly characterized under AM1.5G 100 mW cm⁻² (1 sun) illumination, their performance under low light illumination is also important, because photocells are frequently used for indoor applications. In this study, polymer photocells based on a bulk heterojunction composite consisting of a low energy gap polymer PTB7 and unmodified C₇₀ prepared with a halogen-free solvent 1,2,4-trimethylbenzene have been characterized under the illumination of 1 sun or below. A typical photocell with the power conversion efficiency (PCE) of 4% at 1 sun shows the PCE of approximately 7% at 10⁻³ sun, which seems to fit for some indoor applications such as a permanent power source for a wireless sensor node. The sublinear dependence of short-circuit photocurrent on light intensity as well as the increase of fill-factor under low light illumination yields the increased efficiency under low light illumination. An analysis employing a one-diode equivalent circuit model suggests that the increased parallel resistance as well as the decreased saturation current of the diode under low light illumination accounts for the latter feature. It is also pointed out that the parallel resistance and/or the saturation current under dark strongly influence the PCE of a photocell under low light illumination. In addition, the dependence of the device performance on the light intensity is found to be useful for analyzing the effects of the thermal treatment and the PFN interlayer at cathode.     

Assessing the influence of repeated exposures and mental stress on human wayfinding performance in indoor environments using virtual reality technology

This study aimed to examine the effect of repeated exposures to indoor environments on people’s indoor wayfinding performance, both under normal condition and during fire emergency which could induce significant mental stress. Indoor wayfinding experiments were conducted in an immersive virtual museum developed using virtual reality technologies. Participants of the experiments were divided into three groups, who participated in one, two and three trials, respectively. Those who participated in more than one trial were given an interval of two weeks between two consecutive trials. Each trial of the experiment included a treasure hunting task and an egress task. Participants were presented with a virtual fire emergency during the egress task of their last trial. Data of wayfinding performance measures of the participants, as well as their physiological and emotional responses, sense of direction, wayfinding anxiety and simulator sickness were collected and analyzed. The results revealed significant positive impact of repeated exposure on participants’ wayfinding performance, which resulted in a decrease in the time needed to complete the treasure hunting task. The results also revealed significant negative impact of mental stressed caused by the fire emergency on participants’ wayfinding performance, which led to increased travel time and distance during egress. Such negative impact of stress, however, could be noticeably diminished by the repeated exposures, showing significant interaction effect between these two factors.     

Photovoltaic performance of Organic Photovoltaics for indoor energy harvester

Wireless sensor network becomes widespread into home and offices to keep them comfort and save the energy. The battery-less wireless sensor nodes need the high performance indoor solar cells for stable and sustainable operation. Organic Photovoltaics (OPV) has great indoor photovoltaic performance because ultra-thin organic layer has strong absorption against the UV–visible spectrum that is good spectral matching with indoor lightings. In this study, OPV module has 8 cells in series and same size as the conventional amorphous silicon solar cells (a-Si) for indoor light harvesting. OPV and a-Si are measured their photovoltaic performance under the fluorescent light and demonstrated for energy harvester of wireless sensor network. The output power of OPV and a-Si is 43.4 μW cm⁻² and 28.5 μW cm⁻² at fluorescent light 1000lux respectively. The data transmission rate of the wireless sensor node driven by OPV is 30–40% improved under the dim light condition compared to a-Si.     

Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

Classroom ventilation and indoor air quality—results from the FRESH intervention study

Inadequate ventilation of classrooms may lead to increased concentrations of pollutants generated indoors in schools. The FRESH study, on the effects of increased classroom ventilation on indoor air quality, was performed in 18 naturally ventilated classrooms of 17 primary schools in the Netherlands during the heating seasons of 2010–2012. In 12 classrooms, ventilation was increased to targeted CO₂ concentrations of 800 or 1200 ppm, using a temporary CO₂ controlled mechanical ventilation system. Six classrooms were included as controls. In each classroom, data on endotoxin, β(1,3)‐glucans, and particles with diameters of <10 μm (PM₁₀) and <2.5 μm (PM_2.5) and nitrogen dioxide (NO₂) were collected during three consecutive weeks. Associations between the intervention and these measured indoor air pollution levels were assessed using mixed models, with random classroom effects. The intervention lowered endotoxin and β(1,3)‐glucan levels and PM₁₀ concentrations significantly. PM₁₀ for instance was reduced by 25 μg/m³ (95% confidence interval 13–38 μg/m³) from 54 μg/m³ at maximum ventilation rate. No significant differences were found between the two ventilation settings. Concentrations of PM_2.5 and NO₂ were not affected by the intervention. Our results provide evidence that increasing classroom ventilation is effective in decreasing the concentrations of some indoor‐generated pollutants.