Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

高性能2.5Gb／s用的DFB—LD／EA单片集成器件

报导了采用全ＭＯＣＶＤ生长的１．５５μｍ的单片集成ＤＦＢ＝ＬＤ／ＥＡ组件的 在ＤＷＤＭ系统上的传输测试结果，出纤功率Ｐｆ≥２．５ｍＷ＠Ｉｆ＝７５ｍＡ，边模抑制比ＳＭＳＲ〉３５ｄＢ，调制器反向偏压为２．５Ｖ时的消光比为１４ｄＢ，该发射模块在２．５Ｇｂ／ｓＤＷＤＭ系统上进行了传输试验，传输２４０Ｋｍ后无误码，其通道代价≤１ｄＢ＠ＢＥＲ＝１０＾－１２。     

An integrated system of biological and catalytic oxidation for the removal of o-xylene from exhaust

Biofiltration is an efficient technology for treatment of gaseous waste. Its disadvantages, however, include large volume of bioreactor and slow adaptation to fluctuating concentrations in waste gas. Catalytic oxidation offers a high destructive efficiency at relatively low operating temperature and small unit. A bench scale system integrated with a biofilter and a catalytic oxidation unit for the treatment of gases containing o-xylene was investigated in this study. The catalytic oxidation unit was packed with Cu/Al₂O₃ catalyst. The results showed that 90% of o-xylene could be removed in the biofilter at the load below 38.2 g m⁻³ h⁻¹. High o-xylene concentration in inlet gas resulted in an overload of the biofilter. Using the Cu/Al₂O₃ catalytic oxidation unit, the concentration of o-xylene could be reduced evidently. The combination of the chemical and microbial processes not only led to a high and stable efficiency of o-xylene conversion, but also improved capacity resisting the shock loads. The Cu/Al₂O₃ was studied for o-xylene oxidation in temperature range of 90–320 °C. The o-xylene conversion was improved correspondingly with the increasing of oxidation temperature. The reaction mechanism of o-xylene oxidation on Cu/Al₂O₃ was also investigated using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).     

卫星遥感测控的系统融合技术

卫星遥感测控系统包括运载火箭飞行测控，卫星运行测控，有效载荷设备测控以及它本身应完成的遥感测量，高效完备的系统融合技术采用包括视频综合技术，统一载波宽带传输技术，地面站多功能统一测控技术，软件化技术，载波综合利用技术等，大大简化了卫星遥感的测控设备。     

未来十年综合航电系统的发展趋向

本文主要阐述未来十年国外综合航电系统的总的发展趋向，重点介绍了在开放式系统结构的研究与应用、采用COTS技术、模块化、多传感器综合技术等方面的发展趋向。     

集成pH－ISFET／压力传感器的研究

基于ＳＤＢ／ＳＯＩ材料和硅微机械加工技术，提出了一种含微参比电极和择优差分补偿单元的背面引线ＰＨ－ＩＳＦＥＴ／压力传感器的新结构。并且设计了高稳定的可调芯片自恒温系统，以减少硅材料对温度敏感的效应。这种结构既方便地实现敏感元和信号处理电路的完全隔离，又有效地改善了敏感特性和稳定性。初步实验结果证实了新结构设计是成功的。     

Development of an integrated model for airflow in building spaces

In building energy simulation, an integrated modelling of airflow in the building needed. Therefore, in this paper two approaches are used for building energy simulation: zonal network for modelling of the building segments and Computational Fluid Dynamics (CFD) for modelling of the airflow. It is noted that a synchronize solution process is needed for the building and the CFD equation-sets. For this purpose an iterative procedure is used to corresponding solution of these equations.     

TOPSwitch集成电路在DC/DC电源设计中的应用

文章介绍了PWM／MOSFET二合一的TOPSwitch系列集成电路及其在DC／DC电源设计中的应用，还介绍了基本反馈方式的DC／DC拓扑结构及其改进措施，并对由TOPSwitch集成电路构成的DC／DC电源进行了抗中子实验。     

BTT－固冲导弹总体一体化设计方法研究

从BTT-固冲导弹的特点:固冲发动机、导弹外形及控制系统具有强耦合的性质出发,分析了相互影响因素及建立计算模型时的特点。提出了一种BTT-固冲导弹总体一体化设计方法。     

一种高并行度的H.264帧内预测器的VLSI设计

分析了帧内预测的17种模式,对于每个4×4大小块的16个像素点的不同模式的预测公式之间的相同运算,采用数字强度缩减的方法去除计算的冗余,提出了一种高并行度的帧内预测器,可以每个时钟周期处理16个像素点的预测值。基于SMIC0.18μm工艺,用verilog对该设计进行了VLSI实现,综合后的电路的关键路径最大时延为10ns,电路规模不超过1.4万门,数据吞吐率可以达到1600Msamples/s。从实现结果来看,与采用可重构方法的设计相比,该设计在相同的并行度下减小了电路面积,简化了控制逻辑。