Surface adsorption of comb polymers by Monte Carlo simulations

This paper reports off-lattice Monte Carlo simulations of highly-branched comb homopolymers weakly adsorbed on a flat, featureless surface showing only covolume and dispersion interactions with the adsorbate. A minimal coarse-grained model, described by hard spheres connected by harmonic springs, was employed. The interaction energy of the adsorbed combs and linear chains is first discussed as a function of the molecular mass and of the number of beads in contact with the surface. The molecular size is then investigated as a function of backbone length and branching density at a fixed arm size. The apparent swelling exponents of the adsorbed combs are larger than those of the corresponding linear chains, and much larger than that of the free molecules. This result indicates a surface-induced stiffening of the comb backbone, further studied through the persistence length l_pers. It is found that l_pers increases upon adsorption over the free-molecule value, more so the larger is the branching density. Finally, the thickness of the adsorbed layer, the surface-induced molecular anisotropy and the molecular aspect ratio are investigated as a function of branching density and molecular mass.     

Agricultural land-use change in Brazilian Amazônia between 1980 and 1995: Evidence from integrated satellite and census data

As cropland and pasture have replaced forest and cerrado in Brazilian Amazônia, concern has mounted over the effects of changing the biogeochemical and hydrological properties of one of the world's great storehouses of biomass and biodiversity. Although much recent effort has focused on the location, effects, and causes of deforestation and cerrado conversion, much less is known about the basin-wide spatial distribution and density of the land use following conversion for crops or pasture.In this paper, we use census and satellite records to develop maps of the distribution and abundance of major agricultural land uses across 4.5×10⁸ ha of Brazilian Amazônia in 1980 and 1995. Results indicate an overall expansion of 7.0×10⁶ ha in total agricultural area in Brazilian Amazônia between 1980 and 1995. The net change during this period is estimated for three different land-use types: croplands (an increase of 0.8×10⁶ ha), natural pastures (a decrease of 8.4×10⁶ ha), and planted pastures (an increase of 14.7×10⁶ ha). These estimates, the first spatially explicit quantifications of agricultural land-use activities in 1980 and 1995 across Brazilian Amazônia, are shown to be consistent with the results of applying a land use change and secondary regrowth model to published deforestation rates for the period.The resulting time slices, presented for each land-use category at 5-min (∼9 km) spatial resolution, allow for the quantification of land-use changes in this region for biogeochemical, demographic and economic models. Several foci of agricultural change existed within Brazilian Amazônia during this period: in the state of Pará, cropland was lost and planted pasture increased markedly; in Mato Grosso, both cropland and planted pasture increased; in Rondônia, planted pasture replacing forest was the primary route to agricultural expansion.     

Electron spectroscopies and their use for materials characterization

We present here a general overview of electron spectroscopies from a practical point of view. The most frequently used ones are described and the type of structural information they can provide on materials is explained in relation to the physical processes on which they are based. Furthermore, we explore critically and in detail various tools that have been developed to allow a systematic solving of structures by these spectroscopies.     

住宅楼温度裂缝产生的原因与防治措施

本文对建筑物温度裂缝产生的原因进行了分析和探讨 ,并从设计、施工方面对防治裂缝提出了措施。     

Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles

Carbon-based nanoparticles synthesized by heat treatment of nanodiamond in the temperature range of 1000–1900 °C were added to PTFE film to investigate the structural effect of the carbon particles on the tribological properties of PTFE composite film. Carbon-based nanoparticles were prepared by milling with micron sized beads in chemically treated water before their addition to PTFE film. The wear and frictional properties of PTFE nanocomposite film were measured by the ball on plate type wear test. The wear resistance of PTFE film was found to be enhanced by the addition of 2 wt% of carbon nanoparticles. The wear coefficient of PTFE film was decreased from 16.2 to 3.5 × 10⁻⁶ mm³/N m by the addition of carbon-based nanoparticles heat-treated at 1000 °C. Increasing the heating temperature of the nanodiamonds caused the extent of aggregation and particle size to increase. The wear resistance of PTFE nanocomposite film was enhanced by the addition of nanodiamonds heat-treated at 1000 °C, but decreased when the heat treatment temperature of carbon nanoparticles was further increased. Tribological behavior of PTFE nanocomposite films depending on the types of carbon nanoparticles were explained based on the structural, physical and chemical modification of carbon nanoparticles.     

Thermal Performance Analysis of Highly Reflective Coating on Residences in Hot and Arid Climates

A 1-D transient model (RESHEAT), developed by the writers, was used to study the thermal performance of a highly reflective paint applied sequentially to the outer walls and roof of a simulated residence in a hot and arid region of the southwestern United States. The model uses climatological inputs from a file that includes hourly data on ambient temperatures, insolation, cloud cover, and so on, at the particular location. The model focuses particularly on the potential cooling load reduction due to the reduced heat pickup from the inside attic surfaces to the outer surfaces of the supply duct. This simulation showed that a reduction of 33.6% (cooling load) on the average is achieved over the base case where no reflective paint is used when the outer surface of the roof and walls are painted. Alternatively, only a 11% reduction would be achieved if the reflective paint is applied only to the roof. Savings of $42 per month are conservatively estimated from calculations made when applying this technology to a typical residence (roof and walls) equipped with a 4 ton refrigeration unit in the Southwest.     

Effects of chemical and plasma surface treatments on the O2-annealed Ni/Au contact to p-Gan

The effects of boiling Aqua Regia (AQ), N₂/Cl₂ plasma followed by AQ and O₂ plasma followed by AQ surface treatments prior to Ni/Au (20 nm/20 nm) metallization to p-GaN:Mg (∼ 3 × 10¹⁷ cm^− 3) have been investigated. N₂/Cl₂ plasma was employed in a bid to lower the Ga/N and O/Ga ratios of the GaN surface to improve the contact properties to p-GaN, while O₂ plasma was employed as an alternative to incorporate O into the Ni/Au system. Results show that a low Ga/N ratio does not necessarily correspond to a better contact. The positive effect of O₂ over N₂ anneal is observed only for the AQ-treated sample, although the mechanisms responsible for its positive effect: NiO formation and Ni/Au layer-reversal were observed for all O₂-annealed contacts. We conclude that the effect of O₂ anneal on the Ni/Au contact is dependant on the p-GaN surface prior to metallization.     

Anion Sensing Porphyrin Functionalized Nanoparticles

Disulfide and dithiocarbamate functionalized porphyrins have been synthesized and used as protecting ligands for gold nanoparticle formation either via ligand substitution reactions or by direct synthesis. These nanoparticles have been shown to recognize anions via changes in the absorbance spectrum of the surface adsorbed porphyrin moieties. Association constants, derived from quantitative titrations, indicate a remarkable surface enhancement effect where the surface bound porphyrins bind anions much more strongly than the free receptor in solution.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.