Mapping surface temperature in large lakes with MODIS data

Satellite sensor MODIS on two platforms can produce Sea Surface Temperature over certain regions about three to four times per day. Our objective was to test if the MODIS SST product can be applied for lakes whose surface areas are large enough to be observed at the MODIS spatial resolution and to compare the satellite-derived lake surface temperatures with in situ measurements. Surface temperatures for Lakes Vänern and Vättern in Sweden, two of the largest European lakes, are extracted from the MODIS/Terra images for period 2001-2003. The results are analyzed on different quality levels, as all MODIS L2 products are equipped with an additional quality flag. We present temperature development over 2001-2003, and show the capability of the MODIS SST product to couple the known thermodynamical features in the lakes under study, where temperature varies greatly with space and time. These results can complement lake monitoring programs anywhere.     

���������ɹ���ߺ�����������ѹ�����㷽����MDT���Է���

川东北飞仙关组高含硫气藏气井在完井测试过程中，压力测点位置与产层中部的距离较大，需将压力数据用气柱压力计算公式折算后再进行试井分析解释。文章以质量、动量和能量三大守恒方程和状态方程为基础，考虑了流动气柱的动能损失以及井筒和地层中复杂的传热机理，推导出计算单相气流在井筒不同部位压力和温度的方法。以坡2井为例，应用目前最新的模块化动态地层测试器MDT地层测试技术，对折算的压力进行了验证和对比分析。结果表明，应用文中的压力计算方法，完全可以满足解释的压力数据精度。另外，在没有进行完井测试前利用MDT测压资料确定地层压力等储层参数是较为直接和可靠的方法。同时此法对川东北飞仙关组高含硫气藏的开发动态监测以控制元素硫在井底和井筒的沉积具有十分重要的指导意义。     

Inside Front Cover: Homeotropic Alignment of Columnar Liquid Crystals in Open Films by Means of Surface Nanopatterning (Adv. Mater. 6/2007)

Columnar liquid crystals (LCs) are found to spontaneously form homeotropically‐aligned films when deposited on surfaces fabricated via friction transfer of polytetrafluoroethylene. The inside cover schematically shows the film structure of a phthalocyanine derivative together with the corresponding X‐ray diffraction pattern (inset). The results, reported on p. 815 by Dmitri Ivanov and co‐workers, indicate that not only are the columns homeotropically oriented but also that they form a single monodomain of macroscopic size. These findings can have an important impact for fabrication of LC‐based organic solar cells.     

六通道瞬态光学高温计

六通道瞬态光学高温计是在可见光和近红外光谱范围内 ,把光源的热辐射取出六个波段进行测量。每个波段信号通过各自的光纤传输、光电倍增管探测和记录仪器记录。系统的时间分辨率小于 30 ns,冲击温度测量范围为 2 30 0～ 90 0 0 K,测量误差小于 5 % ,给出了以碘化钠、硝基甲烷和空气为样品的若干实验结果     

A self-organizing fuzzy control of weld pool size in GMA welding processes

In arc welding processes, because of the complexity and nonlinearity of heat transfer phenomena, it is often difficult to design an effective control system based upon an exact mathematical model. In this paper, a self-organizing fuzzy control method is proposed to obtain a uniform weld quality by regulation of the surface temperature at a desired level. The proposed control system is designed to comprise a combined structure of the fuzzy SOC with conventional PD control for improving the system's stability. The control experiments show that the proposed controller guarantees a uniform weld quality for various welding conditions.     

多孔硅发光的物理机制——纳米量子限制效应及表面态在发光中的作用

采用阳极氧化腐蚀的方法制备了多孔硅（ＰＳ），这种ＰＳ的微结构为纳米量级的，并具有光致发光特性，这无疑将对全硅光电子学的发展具有很大意义。根据大量实验与理论分析，提出了这种ＰＳ发光的物理机制：纳米量子限制效应和表面态及其物质在发光中的作用，从量子力学的薛定锷方程出发，用沟道势阱的近似模型，推导得到进入量子线的电子和空穴的能量势垒，ＰＳ的有效带宽Ｅ＝Ｅ＿０＋ΔＥ，对于Ｓｉ（Ｅ＿０＝１．１２ｅｖ）。完美地解释了目前在ＰＳ研究中的ＰＬ谱的篮移现象。     

AlGaAs／GaAs HBT表面效应的二维数值分析

采用表面效应集总模型综合考虑表面费米能级钉扎和表面复合效应，对ＡｌＧａＡｓ／ＧａＡｓＨＢＴ表面效应的影响进行了二维数值模拟。结果表明，表面态的存在对集电极电流几乎不产生影响，但显著增加基极电流，使得电流增益明显下降。同时还发现在台面结构ＡＩＧａＡｓ／ＧａＡｓＨＢＴ中外基区表面复合的集边效应，即外基区表面复合主要发生在发射极台面与外基区的交界处附近，与外基区长度基本无关。模拟还表明基区缓变结构可以减少表面复合，提高电流增益。     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

粒界缓冲型展宽效应对PTC材料温度系数的影响

本文利用相变扩张理论分析了粒界缓冲型展宽效应对BaTiO_3系PTC陶瓷的介电系数及温度系数a_r的影响,指出了晶粒尺寸和温度系数的关系。