Fluidization of the active component of catalysts in catalytic formation of carbon assisted by iron and nickel carbides

A series of vanadium-tin mixed oxide catalysts have been prepared by the solid-state reaction of V₂O₅ and SnO₂ at 1250°C. The fresh and the used catalysts have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). High temperature oxygen chemisorption (HTOC) has been employed to titrate the coordinatively unsaturated vanadia sites. Ammoxidation of mesitylene has been carried out on these catalysts and an optimum composition of vanadium is arrived at. Better yields of tricyanobenzene (TCB) compared to literature values are obtained. A good correlation between the oxygen uptake and the TCB yield extends the applicability of HTOC to the fused oxide system.IICT Communication No. 3507.     

Determination of assimilable organic carbon (aoc) in ozonated water with acinetobacter calcoaceticus

The effect of ozone application in drinking water on the production of assimilable organic carbon (AOC) was evaluated. The typical procedure to determine AOC is suggested by van der Kooij, which is the method of bacterial growth measurement by colony‐forming units using the strain P17 and/or NOX. The bacterial indicator species used for this study is Acinetobacter calcoaceticus which was isolated and identified while ozonating Nakdong river water. This strain could never be isolated from the raw water, but this strain was the predominant isolate in the ozonated water. Within a short incubation time, this organism was found to replicate well on acetate and oxalate as the sole carbon sources. The yield coefficients of this organism for acetate and oxalate are the same order of magnitude as the value of P17 and NOX. With full‐scale experiments, A. calcoaceticus concentration was found to increase after ozonation, but did not decrease upon chlorination. In laboratory‐scale experiments with Yongsan river water, aldehyes were found to be produced in proportion to the ozone dose. The raw water contains low concentrations of aldehydes, but has a high AOC concentration. A correlation between aldehyde production and AOC production was observed in the tested water with ozonation.     

Effect of antioxidant contained in poly(ethylene glycol) on cell fusion

The effect of antioxidants contained in poly(ethylene glycol) (PEG) on cell fusion was studied using L929 cells in the monolayer state. Hydroquinone monomethyl ether (HQME), 2-mercaptobenzimidazole (MB), butyl hydroxyanisole (BHA) and 2,6-di-(t-butyl)-4-methylphenol (BHT) were chosen from the antioxidants that have currently been used to protect commercially available PEG from oxidation. Cell culture was conducted in 40% w/w aqueous solution of PEG with a molecular weight of 3000 in the presence of different concentrations of antioxidants. BHA clearly enhanced membrane fusion of L929 cells with increasing concentration in PEG solution, whereas HQME, MB and BHT had no significant effect on cell fusion. The enhancement of cell fusion by BHA might be ascribed to balanced hydrophobicity and high water solubility in comparison with the other three antioxidants.     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。     

气相处理对碳纤维表面及其复合材料性能的影响

本文对气相表面处理碳纤维的新工艺进行了系统研究。处理后的碳纤维强度、模量不下降,且其表面能、表面化学官能团含量明显增加;表面微晶结构变小,与环氧树脂复合后,层间剪切强度(LLSS)提高47%左右。本文还对复合材料断口的形态结构进行了分析,说明这种表面处理方法能有效改善碳纤维增强环氧树脂复合材料(CFRP)的界面粘结。     

光盘用光学头物镜性能的综合评估

论述了采用波象差均方根、点扩展函数、光学传递函数对高次旋转对称非球面光学头物镜性能进行综合评估的方法。作者在正则坐标理论基础〔１〕上编制了光学头物镜性能综合评估软件。给出了评估实例。     

ATM交换机的硬件体系结构探讨

本文首先对ＡＴＭ的背景作了一个简单的介绍，接着阐述了ＡＴＭ和ＡＴＭ交换机的主要原理和技术，然后从硬件系结构的角度具体地分析了一种实验ＡＴＭ交换机是怎样ＡＴＭ技术的详细方法。     

MICROSTRUCTURE AND FATIGUE PROPERTIES OF A WELDED DUPLEX STAINLESS STEEL

Abstract— In response to the increasing structural applications in duplex steels for welded structures, fatigue behaviour of a SAF 2304 grade duplex stainless steel was investigated, considering both the base metal and GTAW welded joints. Fatigue curves and fatigue limits under rotary bending fatigue were obtained. The study focused attention on the microstructural features of fatigue crack propagation of the two series of experiments, thereby permitting an evaluation of the tortuous crack path of welded joints and the mechanisms related to threshold microstructural barriers.     

岩心PI值试验研究及应用

主要论述了在多功能采油化学用剂评价仪上进行的岩心ＰＩ值试验的步骤，现象及结论。重点考察了岩心ＰＩ值与渗透率、流量及注入截面面积的关系；平行管岩心复合ＰＩ值和其中单管岩心ＰＩ值的关系。