CMP系统技术与市场

概述了CMP系统技术的发展历史、发展趋势以及在IC生产中的重要性,介绍了国外CMP设备主要制造厂家的设备型号和性能及CMP设备市场分布和需求,阐述了CMP系统技术的基础研究、关键技术和国内研究概况。     

基于光子带隙(PBG)结构的小型K波段谐振式带通滤波器

提出了一种新的基于光子带隙结构的K波段谐振式带通滤波器，给出了近似设计公式，并在半导体衬底上，采用微电子的工艺实现了这种结构。这种滤波器设计方法简单，体积小，整个长度接近谐振频率上的导波波长，加工方便，便于与其他电路集成，带内损耗小，阻带范围宽，带外抑制高。另外，本文的理论分析和实验结果均基于半导体衬底，可以直接应用于微波集成电路中。理论模拟与实际测量值基本吻合。     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

协同作战能力简析

协同作战能力(CEC)是一种充分利用网络技术的新型海岸防空技术，给系统的作战能力带来了革命性的交破。本文对协同作战能力的产生、功能、组成以及未来的发展趋势作了详细的介绍，阐述了CEC系统的总体设计思想。在此基础上，将CEC系统与传统的作战系统的性能和设计思想在各方面进行了比较，交出了CEC系统各方面的优越性能。协同作战能力是现代和未来作战系统的发展方向，CEC系统的发展必将成为衡量各国国防科技现代化的重要指标。     

基于均匀光纤光栅的DWDM系统PMD补偿方法

提出一种基于均匀光纤Bragg光栅(FBG)的透射型密集波分复用(DWDM)系统多信道偏振模色散(PMD)补偿方案。当FBG受到横向挤压时，会产生双折射现象。当一波长的光信号从光栅带隙附近透射时，就会在快轴和慢轴之间产生时延差(DGD)。通过改变外力的大小来调节DGD的大小可以实现对PMD的补偿。通过将多个补偿光栅级联，就可以实现对DWDM系统多信道PMD的补偿。在100N外力作用下，5cm长的光栅最大可以补偿121ps的PMD，而对相邻0．8nm的信道，只引入0．2ps的DGD。     

牛奶加工过程中的清洗(二)

五．牛奶厂的清洗。目前，牛奶厂采用的清洗方式主要是CIP清洗(Cleaning in place)，原地清洗或称定置清洗，即在基本不拆卸或挪动机械装置和管线的情况下对生产过程中能与牛奶发生接触的设备表面进行的清洗。其冲刷、清洗、灭菌的整个过程全部实现了自动化因此大大降低了劳动强度。而有一些不     

Physico-chemical characterization of hybrid polymers obtained by 2-hydroxyethyl(methacrylate) and alkoxides of zirconium

Hybrid monolithic materials were prepared through polymerisation of 2-hydroxyethyl methacrylate (HEMA) mixed with zirconium alkoxides (Zr(OBuⁿ)₄, Zr(OPrⁿ)₄ and Zr(OEt)₄), modified by acetylacetonate groups. The molar ratio HEMA/Zr varied between 1 and 4. Thermo-Gravimetry coupled with Mass Spectroscopy (TG-MS) analyses, ¹³C MAS NMR and Dynamical Mechanical Thermal Analysys (DMTA) indicated the polymeric chains were interconnected by the inorganic component.The presence of zirconium alkoxides modified substantially the poly-HEMA properties. Glass transition temperature of hybrid materials derived from butoxy and propoxy was found in the range 50-80 °C, depending on the composition. The typical swelling of p-HEMA in the water, was suppressed by the presence of zirconium compounds. After immersion in distilled water, hybrid polymers showed an initial slight weight increase, followed by a small mass loss, which increases proportionally to the length of alkoxyl group (ethoxide(propoxide(butoxide) and reaches a constant value after about 40 days. The hybrids remained always rigid and transparent. Flexural modulus and strength of about 400-900 and 4-8 MPa were measured.     

斜拉索-磁流变阻尼器系统半主动控制的神经网络法

磁流变阻尼器具有良好的可变阻尼特性，能用于结构的半主动控制。针对斜拉桥拉索-磁流变阻尼器系统，本文提出了利用神经控制器进行半主动控制的神经网络法，该神经控制器根据过去时刻的加速度响应和控制信号预测下一时间步的控制信号，并给出了训练方法及开展了数值仿真研究。仿真结果显示，采用神经网络半主动控制能取得很好的减振效果，证明该方法是可行的。     

煤层气利用新方案

在介绍煤层气的常规利用方案的基础上，提出了两种利用煤层气的新方案：一是采用变压吸附技术，纯化瓦斯气，将低浓度瓦斯气浓缩为高浓度瓦斯气，加压后成为CNG，用作CNG气源或较远距离城市的天然气气源；二是在第一种方案的基础上，将高浓度瓦斯气全部采用深冷法加以液化，生产LNG，并将LNG运送至更远距离用作LNG加气站、CNG加气站气源。最后还以松藻煤电公司为例，作了新方案的工程预算     

共面波导(CPW)馈电单极子天线的设计与研究

给出一种工作于900MHz的共面波导(CPW)馈电单极子天线的设计。该单极子天线以共面波导的中心导带为辐射单极子，以中心导带两边的金属导体作反射板，结构简单紧凑。但是由于天线与共面波导之间缺少有效的隔离，造成天线性能受共面波导尺寸的影响较严重。本文通过模拟计算和实验测量详细分析了共面波导尺寸的变化对天线性能的影响，给出了结合共面波导尺寸设计的工作在900MHz的单极子天线结构数据。