Growth condition of iodine-doped n+-CdTe layers in metal-organic vapor phase epitaxy

Iodine doping of CdTe layers grown on (100) GaAs by metal-organic vapor phase epitaxy (MOVPE) was studied using diethyltelluride (DETe) and diisopropyltelluride (DiPTe) as tellurium precursors and ethyliodine (EI) as a dopant. Electron densities of doped layers increased gradually with decreasing the growth temperature from 425°C to 325°C. Doped layers grown with DETe had higher electron densities than those grown with DiPTe. When the hot-wall temperature was increased from 200°C to 250°C at the growth temperature of 325°C, doped layers grown with DETe showed an increase of the electron density from 3.7×10¹⁶ cm⁻³ to 2.6×10¹⁸ cm⁻³. On the other hand, such an increase of the electron density was not observed for layers grown with DiPTe. The mechanisms for different doping properties for DETe and DiPTe were studied on the basis of the growth characteristics for these precursors. Higher thermal stability of DETe than that of DiPTe was considered to cause the difference of doping properties. With increasing the hot-wall temperature from 200°C to 250°C, the effective ratio of Cd to Te species on the growth surface became larger for layers grown with DETe than those grown with DiPTe. This was considered to decrease the compensation of doped iodine and to increase the electron density of layers grown with DETe. The effective ratio of Cd to Te species on the growth surface also increased with decreasing growth temperature. This was considered to increase the electron density with decreasing growth temperature.     

分散图象压缩的遗传算法

基于分形和PIFS函数的特点，提出一种改进的遗传算法用于分形压缩分块的定义域匹配搜索算法。该方法克服了原来分形图象压缩中分类匹配算法固有的局部最优性和随机搜索的缺点，是一种具导引的全局优化的搜索算法。分析和实验表明，该方法的图象压缩比高，解码质量好，若应用遗传算法的并行性，其编码速度也得到提高。     

Energy absorption in splitting square metal tubes

This paper presents an investigation into the energy absorbing behaviour of axially splitting square metal tubes. Tubes 50 mm square with a variable thickness were pushed slowly against rigid pyramid shaped dies, which had various semi-angles. By pre-cutting 5 mm long slits at the four corners, the tube splits along the corners and curls outward with a certain radius at a constant force. In this energy dissipating system, there are three components: tearing energy, plastic deformation energy and frictional energy. Theoretical analysis of the three energy components is presented. Curl radius is also studied in detail. Good agreement between experiments and theory is obtained. The results show that tubes which both split and curl may be used as efficient, long stroke energy absorbing devices.     

NGN问题及其发展策略考虑

本文在分析讨论NGN的背景，目前存在的争议基础上，结合中国国情，重点对NGN框架目标进行了展望并提出了发展策略考虑。     

数字视频混合系统的设计

介绍了利用Philips的一款视频芯片SAA71 99B实现的数字视频混合系统.该系统可以将一路PAL制彩色复合视频信号编码进入另一路PAL制彩色复合视频信号中,以取代第二路视频中用户指定的颜色,从而实现了两路视频的混合.另外还介绍了如何利用单片机的I/O口模拟I 2C总线以及如何利用单片机进行彩色空间变换的算法.     

聚醚砜中空纤维的成形条件对其宏观结构的影响

主要讨论了纺速、填充液压力、凝固浴浓度和拉伸率成形条件的设置对中空纤维的宏观结构的影响 ,为设计具有合理的宏观结构的中空纤维膜提供参考     

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺,在100℃条件下能满足毛、涤两种纤维同时上染,染色产品具有着色深浓鲜艳,色泽一致,各项牢度符合要求,对纤维无损伤等优点,从而缩短生产时间,降低成本,提高经济效益。     

数值地形图的生成及其水文地貌特征评价

数值地形图(DEM)是利用地理信息系统(GIS)进行流域水文模拟的基础, 其精度直接影响模拟结果在没有现成的数值地形图时, 应用人员往往利用传统的地形图来生成它. 本文分别采用Arc/Info地理信息系统软件提供的哈奇逊法和不规则三角网五次插值法, 对一个实验流域的高程取样点进行插值, 生成了4种不同的数值地形图, 从凹洼分布、流域界定、河网提取、地面坡度和地形指数、以及地面径流汇成等方面, 对它们的水文地貌精度进行了比较. 结果表明, 两种方法都能生成由高程点群所反映的地形, 然而由于哈奇逊法能够结合流域的河网结构及其具有物理基础的水文地貌加强法来处理凹洼问题, 因此大大地提高了其所生成的流域数值地形图水文地貌特征精度.     

非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经预退火后的晶化动力学的DTA研究

研究了非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经400℃，保温10min预退火后的晶化动力学。结果表明；该合金的晶化相为α-Fe固溶体和Sm2Fe17Cx金属间化合物，两相的晶化表观激活能分别为557KJ/mol和514KJ/mol，当晶化体积分数为60%时，α-Fe相的晶化激活能达极大值；Sm2Fe17Cx相晶化激活能则随其晶化体积分数的增加而逐渐减小。     

黑土土壤质量演变初探I：不同开垦年限黑土主要质量指标演变规律

根据土壤质量的定义和研究方法 ,对黑土的主要质量指标演变规律进行初步研究。结果表明 :黑土的颗粒组成受开垦历史影响的程度较小 ,其质地没有发生显著变化 ;黑土的有机质、全氮、全硫和全磷随着黑土开垦时间的增加而不断降低 ;速效磷随黑土开垦时间的增加有增高的趋势。经过统计分析 ,黑土中粉砂(0.05～0.002mm)含量与细砂(0.25～0.05mm)和粘粒(<0.002mm)含量具有相关性,黑土有机质含量与全氮、全硫、全磷和速效钾具有明显的正相关。因此 ,初步认为黑土中粉粒和有机质含量可以作为土壤物理和养分方面的质量指标