具有控制项的限定记忆卡尔曼滤波器

在已有的限定记忆卡尔曼滤波器的基础上 ,将确定性先验信息作为控制项加以应用 ,推导出了完整的限定记忆卡尔曼滤波公式 ,从而在记忆长度确定的情况下 ,有效地减小了模型不准的误差 ,降低了滤波总误差。仿真同样表明了该方法的有效性     

High resistivity measurement of SiC wafers using different techniques

To establish fast, nondestructive, and inexpensive methods for resistivity measurements of SiC wafers, different resistivity-measurement techniques were tested for characterization of semi-insulating SiC wafers, namely, the four-point probe method with removable graphite contacts, the van der Pauw method with annealed metal and diffused contacts, the current-voltage (I-V) technique, and the contactless resistivity-measurement method. Comparison of different techniques is presented. The resistivity values of the semi-insulating SiC wafer measured using different techniques agree fairly well. As a result, application of removable graphite contacts is proposed for fast and nondestructive resistivity measurement of SiC wafers using the four-point probe method. High-temperature van der Pauw and room-temperature Hall characterization for the tested semi-insulating SiC wafer was also obtained and reported in this work.     

Topology optimization of trusses using genetic algorithm,force method and graph theory

In this article size/topology optimization of trusses is performed using a genetic algorithm (GA), the force method and some concepts of graph theory. One of the main difficulties with optimization with a GA is that the parameters involved are not completely known and the number of operations needed is often quite high. Application of some concepts of the force method, together with theory of graphs, make the generation of a suitable initial population well‐matched with critical paths for the transformation of internal forces feasible. In the process of optimization generated topologically unstable trusses are identified without any matrix manipulation and highly penalized. Identifying a suitable range for the cross‐section of each member for the ground structure in the list of profiles, the length of the substrings representing the cross‐sectional design variables are reduced. Using a contraction algorithm, the length of the strings is further reduced and a GA is performed in a smaller domain of design space. The above process is accompanied by efficient methods for selection, and by using a suitable penalty function in order to reduce the number of numerical operations and to increase the speed of the optimization toward a global optimum. The efficiency of the present method is illustrated using some examples, and compared to those of previous studies. Copyright © 2003 John Wiley & Sons, Ltd.     

烟气轮机叶片应力分析与寿命评估方法评述

烟气轮机是炼油厂催化裂化装置的关键设备,合理预测叶片疲劳寿命是保障烟机安全运行的有效手段。从力学建模和边界条件两个方面简要阐述了叶片的应力分析方法,并系统分析了影响烟机叶片疲劳寿命的主要因素,提出了利用改进的局部应力应变法进行叶片寿命预测的合理性和叶片疲劳寿命的评估方法。     

无钴黑色陶瓷颜料中铬含量测定的新方法

本文以盐酸羟胺作还原剂,研究了三价铬与二甲酚橙的显色反应,结果发现Cr3 在0～80滋g/50ml范围内,其吸光度与Cr3 含量成正比相关,用于无钴黑色陶瓷颜料中铬含量的测定,作出了回归方程,且进行了显著性检验,获得了理想的结果。     

基于小波变换的不同融合规则的图像融合研究

图像融合是一种重要的增强图像信息的方法。提出了一种基于多尺度分解的像素图像融合方法。利用小波变换按照不同融合规则及融合算子构造融合图像对应的小波系数。通过对可见光图像与红外图像进行融合的实验比较表明，以像素的局部能量为准则的融合效果更好，既可避免传统融合规则的信息损失，又提高了融合图像的空间分辨率和清晰度，融合图像更符合人的视觉特性，也有利于机器视觉。     

一种有效减少ADI-FDTD数值色散的方法

ADI—FDTD算法的数值色散效应较为明显，本文的研究表明一种通过添加各向异性媒质来修正相速误差，从而减少FDTD数值色散的方法，同样适用于ADI-FDTD，且收效更为显著。数值运算结果证明该方法能够简单有效地去除较宽频带范围内的色散。     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

PZT陶瓷的断裂分析

与有限元法相比,无网格法由于只需节点不用单元而在压电分析中具有优越性。采用一个简单的包含有极化反转及电饱和影响的锆钛酸铅系压电陶瓷(PZT)的本构模型,以局部J积分作为断裂准则,应用再生核点法这一无网格数值法导出了作用电场与断裂载荷的关系曲线,该曲线的趋势与Park[1]的实验观察现象一致。计算程序采用面向对象方法实现。