激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

Thermally and plastically induced residual strains in textured Zircaloy-2 plate

The residual intergranular strains in textured Zircaloy-2 plate samples induced by cooling from 823 K to ambient temperatures, by cold-rolling by 1.5% and 25% and by deforming in tension by 1.5% were measured by neutron diffraction. The strong rolling texture, which gives rise to two ideal orientations, permitted the interpretation of much of the data in terms of strain tensors for the two orientations. The experimental results were compared with calculations based on the elasto-plastic self-consistent model with no adjustable parameters. Close agreement was obtained for samples in the as-cooled state and deformation in tension by 1.5% but the agreement is less satisfactory for cold-rolling.     

EBSD investigation of SiC for HTR fuel particles

Electron back-scattering diffraction (EBSD) can be successfully performed on SiC coatings for HTR fuel particles. EBSD grain maps obtained from thick and thin unirradiated samples are presented, along with pole figures showing textures and a chart showing the distribution of grain aspect ratios. This information is of great interest, and contributes to improving the process parameters and ensuring the reproducibility of coatings.     

基于Profibus-DP的西门子S7—300 PLC与ABB 800XA数据通信的实现

本文介绍基于Profibus—DP通信协议的西门子S7—300PLC与ABB 800XA系统之间的数据通信。详细描述了分别通过S7—300 PLC CPU的DP接口和CP342—5通信模块与ABB 800XA系统通信两种不同条件下的有关通信配置及实现数据通信的过程。     

μC／OS—Ⅲ在Cortex—M3处理器上的移植

为了将μC／OS-Ⅲ移植到Cortex—M3处理器上,选用RealView MDK作为软件开发平台,针对Cortex—M3处理器特性编写了移植所需的C语言和汇编语言源代码,并验证了移植的正确性。移植后的μC／OS-Ⅲ能够稳定运行于Cortex～M3处理器上。该移植对大部分Cortex—M3处理器具有通用性,对其他架构处理器的μC／OS-Ⅲ移植具有参考作用。     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.     

Crack initiation and propagation induced by inclusions in a nickel-base P/M superalloy under fatigue load

1 IntroductionRecently the key components in advanced aircraftengines are widely made of nickel-base P/M super-alloy. However, non-metallic inclusions are intro-duced into this material during powder metallurgyprocessing. In industry, although many method…     

300M钢腐蚀疲劳裂纹萌生的超载特性

本文对３００Ｍ钢在空气与３．５％ＮａＣｌ溶液中疲劳裂纹萌生的周期超载和单次超载特性进行了试验研究与理论分析。试验结果表明，３．５％ＮａＣｌ溶液中，单次超载所致腐蚀疲劳裂纹迟滞萌生的迟滞强度远小于周期超载的对应值。３．５％ＮａＣｌ溶液与空气中，超载迟滞强度均随超载比增大或等效应力幅水平的提高而增大，在腐蚀疲劳裂纹萌生寿命估算中，只考虑单次超载的迟滞规律，会得出大大保守的寿命估计，只有将单次超载和周期     

Estimation in Random Coefficient Autoregressive Models

Abstract. We propose the quasi‐maximum likelihood method to estimate the parameters of an RCA(1) process, i.e. a random coefficient autoregressive time series of order 1. The strong consistency and the asymptotic normality of the estimators are derived under optimal conditions.