涡轮增压柴油机模拟计算等压法的探讨

针对有些模拟计算可以忽略排气压力波的影响，提出了等压法计算的设想，这是一种每一工作循环缸外热力过程只计算一次的简化方法。分析结果表明，这种计算可以满足零维模型必须满足的所有制约方程，能真实地模拟涡轮增压柴油机的实际工作过程，适用于各种增压系统，但仍有待于进一步的研究与改进。根据等压法，建立了一种适用于定压涡轮系统的计算模型--“定压涡轮”模型，用于MPC增压系统的计算，计算结果与试验结果基本吻合，与容积法计算结果趋于一致，从而验证了模型的正确性，同时也表明这种缸外计算法是有效的。     

Determination of the total concentration and speciation of Al(III) in tea infusions

The aluminium species in different tea infusions were investigated, by determining their stability constants and concentration. This was done for some particular samples using a simple experimental method based on the sorption of aluminium on the strongly sorbing resin Chelex 100, by a batch procedure. From the thermodynamic information obtained it is possible to calculate the concentration of the different species, and in particular that of the free metal ion, which is very important for evaluating the adsorption of aluminium on biological membranes. It was found that aluminium in the tea infusions here considered is present at high total concentration, approximately 0.1 mM, but mainly linked to strong complexes, for instance with side reaction coefficient higher than 10(5.11) at pH 3.95 in one case (tea 1). This could be the reason for the low toxicity of aluminium in tea. These strong complexes were not dissociated even in the presence of Chelex 100. In this case only a limiting value of the reaction coefficient could be evaluated. The presence of the very strong complexes was found in all the tea sample here considered. In two of the considered samples (one black and one green tea) a part of Al(III) was linked to less strong complexes, for example with a reaction coefficient 10(4.14) (tea 2, pH 4.20). The presence in the considered tea infusions of other substances able to complex aluminium was also detected, by the well known ligand titration procedure, at concentration ranging from 0.65 to 3.37 mM in three tea infusions, and at somewhat higher concentration in the case of the ready drink, which was also considered for comparison.     

Self-controlled case series analyses: Small-sample performance

Second-order expressions for the asymptotic bias and variance of the log relative incidence estimator are derived for the self-controlled case series model in a simplified scenario. The dependence of the bias and variance on factors such as the relative incidence and ratio of risk to observation period are studied. Small-sample performance of the estimator in realistic scenarios is investigated using simulations. It is found that, in scenarios likely to arise in practice, asymptotic methods are valid for numbers of cases in excess of 20-50 depending on the ratio of the risk period to the observation period and on the relative incidence. The application of Monte Carlo methods to self-controlled case series analyses is also discussed.     

Modeling and performance analysis of IP access interface in optical transmission networks with packet switching

The article analyzes the influence of the Internet Protocol (IP) access interface on the packet loss probability and delay times in the optical packet switched network. The network and node model have been proposed, and the structure of the IP access interface, including assembler and holder, have been included in the analysis. It has been shown that the increase of the maximum optical packet sizes, as well as use of the holding feature as contention resolution mechanism, decrease the packet loss probability, but introduce delays at the optical network access points. Modeling and analysis were based on the discrete event simulation assuming self-similar traffic sources. IP packet lengths were modeled using empirical data. This work has been conducted while the author was affiliated with the Telecommunication Laboratory, Swiss Federal Institute of Technology (EPFL-STI-ITOP-TCOM), Lausanne, Switzerland     

Issues in modelling of advanced heterogeneous ceramics

Summary The conceptual and computational issues regarding the development of models to predict microstructure/mechanical-property relationships in advanced ceramics are discussed. Advanced ceramics provide a particular challenge because their higher toughness or reliability, relative to monolithic ceramics, is a result of stable, distributed damage evolution. Capturing the details of distributed damage at atomistic and microstructural length scales is computationally prohibitive, but only in certain systems does it appear plausible to neglect atomistic and crack-tip details in favor of larger-scale damage propagation and interaction. Examples, mainly from the author's own work, are briefly presented to indicate the range of problems that have been addressed and the relative successes and failures.     

光柱显示技术探讨

本文叙述自动化仪表用光柱显示技术的工作原理及器件结构，重点论述直流等离子体光柱，发光二极管光柱，真空荧光及液晶光柱器件的结构和驱动电路，还展望光柱显示的发展趋势。     

AlGaAs／GaAs HBT表面效应的二维数值分析

采用表面效应集总模型综合考虑表面费米能级钉扎和表面复合效应，对ＡｌＧａＡｓ／ＧａＡｓＨＢＴ表面效应的影响进行了二维数值模拟。结果表明，表面态的存在对集电极电流几乎不产生影响，但显著增加基极电流，使得电流增益明显下降。同时还发现在台面结构ＡＩＧａＡｓ／ＧａＡｓＨＢＴ中外基区表面复合的集边效应，即外基区表面复合主要发生在发射极台面与外基区的交界处附近，与外基区长度基本无关。模拟还表明基区缓变结构可以减少表面复合，提高电流增益。     

集成基础结构中应用服务器的研究与开发

通过对集成基础结构中应用服务器的功能需求分析，采用面向对象方法、矩阵理论和Ｐｅｔｒｉ网技术研究了应用服务器系统的实现策略，并依据智能工程理论给出了应用服务器的系统结构。     

漳泽水库最优兴利调度研究

漳泽水库供水能力下降。优化调度方式是提高水库效益的最有效途径。通过采用随机动态规划方法与模拟模型交互运算得到现行控制水位的水库优化调度图。采用同样方法对不同控制水位的水库运行方式进行优化调度，选出的规划水库最优控制水位为汛限水位９０４ ．５ ｍ ，正常高水位９０５ ．５ ｍ 。优化的控制水位方案在保障水库防洪安全的前提下可供给城市生活和工业用水６ ３００ 万ｍ３ ，较现行控制水位下的供水量提高１ ２５５ 万ｍ３ 。但农业用水仍然不足，应采取一定措施给予解决，如对灌区工程进行改造，因地制宜采取不同节水措施和污水回用等。     

Software‐processed edge‐ and level‐adaptive overdrive (SELAO) method for high‐quality motion pictures

Abstract— In this paper, a software‐processed edge‐ and level‐adaptive overdrive (SELAO) method, which is a novel overdrive technique that utilizes not only a temporal change of gray levels but also a spatial edge intensity of motion pictures, is proposed. The SELAO method is a software video‐processing technology to improve motion‐picture quality rendered on LCDs more than is possible with a conventional SLAO method without edge‐adaptive overdrive, and it works in real time on commonly used personal computers (PCs).