国有股减持、政府隐性担保与投资者行为

国有股减持导致股票市场的大幅下跌，其咎不在以市场价减持国有股的减持方案．政府对股票市场的隐性担保造成投资者对市场走势的某种“理性的”稳定预期和信念．在此基础之上，政府和投资者塑造各自的心理和行为模式、国有股减持的信号含义就是政府要解除对市场的隐性担保．这个信号引发投资者固有的预期模式和行为模式的转变以及股票市场的信心危机。进而导致股票市场的“非理性反应”—市场以大幅下跌拒绝政府国有股减持和解除担保关系的行为、政府被迫停止国有股减持行为，但停止国有股减持并没有阻止股市的持续下跌，因为减持虽然停止，自减持发出的解除隐性担保的信号仍然有效。     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

B. F. Skinner: Au-delá de la controverse.

Discusses controversies surrounding the work of B. F. Skinner's influence on various theories of human and animal behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

FAFFA加速的PO-MM研究复杂金属载体上线天线电磁特性

本文提出了一种快速远场近似(FAFFA)加速的混合物理光学矩量法(POMM),利用FAFFA加速计算矩阵方程中的矩阵矢量积,明显提高了计算效率.对物体表面上的远场组之间的耦合作用推导出了一组简洁的计算公式,并分析了计算复杂度.复杂金属组合体上线天线输入导纳、互导纳和方向性图的计算结果与文献结果一致.利用该方法分析计算了一个舰船模型上线天线的电磁特性.数值结果表明了这种方法的正确性和工程应用中的有效性.     

Predicting Youth Access to Tobacco: The Role of Youth Versus Store-Clerk Behavior and Issues of Ecological Validity.

Twenty-one 15- to 17-year-olds attempted to purchase cigarettes in 232 stores in the manner that confederates typically do in access studies, as well as in the manipulative ways (e.g., lying about their ages) that youth smokers do, thereby modeling youth access to tobacco within versus outside of studies, respectively. Youth typical-research versus manipulative behavior was contrasted with clerk behavior (requests for youth ID cards) to examine the relative contributions of both to youth access to tobacco for the 1st time. Results revealed that clerk behavior was the strongest predictor of cigarette sales to youth and hence underscore the need for interventions with merchants. Sales nonetheless were higher under youth-manipulative conditions and thereby highlight the low ecological validity of access research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

镁质瓷泥浆流变性能的改进

滑石质瓷是一种高性能瓷的材料，但由于其泥浆的稠化性及泥料塑性差，阻碍了滑石质瓷的大量生产。实验表明：引入长石作助熔剂并加入适量粘土，可以改进泥料塑性及泥浆流变性能，使烧成变形度小，机械强度提高，能较好地满足制品成型的工艺要求。实验中设计了多组配料，分析比较烧后试样的性能测试结果，确定最佳配方及烧结温度。     

Microstructure and thermal behavior of Sn-Zn-Ag solders

The microstructure and thermal behavior of the Sn-Zn-Ag solder were investigated for 8.73–9% Zn and 0–3.0% Ag. The scanning electron microscopy (SEM) analysis shows the Ag-Zn compound when the solder contains 0.1% Ag. X-ray diffraction (XRD) analysis results indicate that Ag₅Zn₈ and AgZn₃ become prominent when the Ag content is 0.3% and above. Meanwhile, the Zn-rich phase is refined, and the Zn orientations gradually diminish upon increase in Ag content. The morphology of the Ag-Zn compound varies from nodular to dendrite structure when the Ag content increases. The growth of the Ag-Zn compounds is accompanied by the diminishing of the eutectic structure of the Sn-9Zn solder. Differential scanning calorimetry (DSC) investigation reveals that the solidus temperature of these solders exists at around 198°C. A single, sharp exothermic peak was found for the solders with Ag content less than 0.5%. Liquidus temperatures were identified with the DSC analysis to vary from 206°C to 215°C when the Ag content ranges from 1.0% to 3.0%     

A study on the interaction between ibuprofen and bilayer lipid membrane

Ibuprofen is a well-known nonsteroidal anti-inflammatory drug, which can interact with lipid membranes. In this paper, the interaction of ibuprofen with bilayer lipid membrane was studied by UV-vis spectroscopy, cyclic voltammetry and AC impedance spectroscopy. UV-vis spectroscopy data indicated directly that ibuprofen could interact with lipid vesicles. In electrochemical experiments, ibuprofen displayed a biphasic behavior on bilayer lipid membrane supported on a glassy carbon electrode. It could stabilize the lipid membrane in low concentration, while it induced defects formation, even removed off bilayer lipid membrane from the surface of the electrode with increasing concentration. The mechanism about the interaction between ibuprofen and supported bilayer lipid membrane was discussed.     

Failure analysis of three reconditioned rail car couplers

Three reconditioned rail car couplers, arbitrarily identified as couplers, failed during service due to cracking of the front face. The three couplers were reportedly upgraded by quenching and tempering to enhance strength and toughness. The objective of this investigation was to determine the mode of crack propagation and the root cause of the observed failures. Verl E. (Bud) Kahle, P.E., was a professional failure analyst for more than forty years. After receiving his Bachelor of Science degree in physical metallurgy from Washington State University 1957, Bud was employed by the General Electric Company at a facility in Hanford, Washington. He later was employed by the Aerojet General Corporation and eventually was head of the Southern Pacific Materials Science Laboratory in Sacramento. After retirement from Southern Pacific he owned and operated his own firm, Kahle Metallurgical Consulting Services, for fifteen years. He came to be known as “the man with the answers” to clients in a variety of industries. Bud was a Life Member of ASM International. Many of Bud’s clients remarked on the high quality of his failure analysis case histories and encouraged him to have them published. After Bud passed away in 1999, his wife, Suzanne, approached ASM International to see if the society would be interested in publishing any of his work. Mrs. Kahle was able to supply a large number of reports, which Bud had carefully archived over the years. Journal of Failure Analysis and Prevention Associate Editor Michael Stevenson read through the collected case histories, selected the ones to be included in this issue, and edited them for journal publication. ASM International wishes to thank Mrs. Kahle for providing these case histories for publication.