New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

深冲汽车簿钢板织构的表述方法

利用晶体学性质,将深冲汽车薄板的两种主要特征织构表述于反极图之中,再利用织构定量技术便能简捷地分析深冲钢板的织构与深冲性能的关系。经验证,此法与ODF定量分析所得的结果一致。     

尖山铁矿破碎机硐室围岩位移反分析及稳定性评价

推导了非均匀应力场下硐室（或隧道）的位移反分析公式，并利用尖山铁矿破碎机硐室围岩位移监测结果反演了围岩的力学参数。计算了硐室周围应力并对其稳定性作了分析评价。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

反相微乳液聚合引发剂对聚丙烯酰胺分子质量影响的研究

分别以三种引发剂体系为引发剂,从引发机理出发,通过正交实验研究了丙烯酰胺反相微乳液聚合中引发剂种类、引发剂浓度、反应温度、单体浓度等对聚丙烯酰胺(PAM)相对分子质量的影响。结果表明,引发剂种类对水溶性PAM相对分子质量有显著的影响;过硫酸铵-亚硫酸氢钠和偶氮二异丁腈复合引发体系是合成高相对分子质量PAM的有效引发体系。该引发体系在反应温度为40℃,氧化还原引发剂与偶氮的质量比为1∶4,单体浓度为20%,引发剂浓度为0.3%,pH为9的最佳条件下合成的PAM相对分子量为1.44×107。     

铝盐沉淀法制备低堆比假一水软铝石的研究

研究了铝盐沉淀法制备假-水软铝石过程中各因素对水合产物物性的影响规律。提出了制备低堆比的高纯假-水软铝石的方法。用NH4HCO3或(NH4)2CO3溶液做洗涤介质有效降低了假-水软铝石中的杂质含量。采用加入晶种的方法制备了低堆比、含有大孔的假-水软铝石。     

基于自适应逆的温度控制系统

介绍了自适应逆控制方案,采用变步长LMS自适应滤波算法,用该算法建立对象的模型、对象逆模型,并设计了自适应逆控制器。将这种控制方案应用到含有大惯性、纯滞后的系统。仿真结果表明,此种方案鲁棒性及动态性能较好。     

Membrane degumming of crude rice bran oil: Pilot plant study

The procedure for the classical chemical refining of vegetable oils consists of degumming, alkali neutralization, bleaching, and deodorization. Conventional refining of rice bran oil using alkali gives oil of acceptable quality, but the refining losses are very high. A critical work has been carried out to study the application of membrane technology in the pretreatment of crude rice bran oil. Oils intended for physical refining should have a low phosphorus content, and this is not readily achievable by the conventional acid/water degumming process. The application of membrane technology for the pretreatment of rice bran oil has been investigated. The process has already been successfully applied to other vegetable oils. Ceramic membranes, which are important from the commercial point of view, were examined for this purpose. The results showed that the membrane‐filtered oils met the requirements of physical refining, with a substantial reduction in color. It was observed that most of the waxy material was also rejected. Experiments were carried out to establish the relationship between permeate flux and rejection with membrane pore size, trans‐membrane pressure and micellar solute concentration.     

数字皮影动画脚本的研究与应用

为简化数字皮影动画的制作流程,提高数字皮影作品的交互性,降低数字皮影实时表演的难度,对皮影常见角色及动作进行了抽象、分类,提出一种针对特定类型的通用的骨骼模型。基于反向动力学,设计了一套描述皮影骨骼动画的脚本。该脚本通过对骨骼位置与旋转属性的控制定义皮影角色的基本动作,并通过对基本动作的叠加实现复杂动作。脚本对动作的定义基于骨骼模型而非具体角色,具有通用性。最后通过实验证明了脚本的有效性。     

Grafting poly(t‐butyl acrylate) to poly(allylamine) by inverse microemulsion radical polymerization: From comb‐polymer to amphiphilic shell crosslinked polymer nanocapsule

An interfacial grafting radical polymerization method for amphiphilic comb copolymer and shell crosslinked polymer nanocapsules was reported. Macropolyradicals on a water soluble long chain polyamine were generated with hydrogen peroxide in the water phase and subsequent grafting radical polymerization of a vinylic monomer at the water/oil interface proceeded at 65°C. In the presence of a crosslinker, the resulting graft copolymer formed a defined core‐shell structure with hydrophilic aqueous core functionalized by the polyamine and a hydrophobic crosslinked polymer shell. The structure of the core‐shell material was characterized by NMR, FTIR, DSC, TGA, SEM, TEM, and the mechanism of the graft polymerization is proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1905–1911, 2007