耦合模模型的峰峰值与有效值

介绍了峰峰值和有效值的偶合模方程,给出了峰峰值P矩阵和有效值P矩阵的表达式。利用峰峰值P矩阵和有效值P矩阵模拟了纵向耦合谐振结构以及阻抗元结构的声表面波滤波器的频响。对比两种P矩阵的模拟结果,说明了峰峰值耦合模方程和有效值耦合模方程分析频响的等效性。     

Method of increasing the output signal-to-noise ratio in passive multi-element antenna arrays

A method of processing complex signals in passive multi-element antenna arrays based on an analysis of the natural values of the correlation matrix of the signal is considered. By means of the method it is possible to substantially increase the output signal-to-noise ratio. An iterational process by means of which optimal estimators of both the signal and the amplitude-phase distribution may be obtained, is proposed. Theoretical estimators of the efficiency of the method are given. It is proved that, in terms of the efficiency, the approach considered in the article comes close to the technique of matched filtration. Results of statistical modeling that confirm the statistical results are presented.     

激光器实用价值的评判

提出用于评价激光器产品实用价值的Q因子,它由激光器的亮度、脉冲宽度及价格确定。Q值大的激光器,开发及发展的潜力大。     

电荷灵敏放大器不用反馈高值电阻的新方法

本文提出了一种电荷灵敏放大器不用反馈高值电阻的新方法。对这种方法作了电路分析以及对实际电路的测量结果作了介绍。     

Pseudoinverse in clustering problems

The clustering of vector observations of hyperplanes is studied. Different cases of correspondence distances are proposed and investigated, including the algebraic Jack Knife one. The efficiency, constructivity, and explicit form of formulas are provided by using the pseudoinverse technique including the pseudoinverse-perturbation theory. Results important for the application of pseudoinverse and related operators are presented. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 4, pp. 73–92, July–August 2007.     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

变频调速节能改造方案的经济性评价和比较

本文详细介绍了变频调速节能改造方案的经济性评价方法。静态分析法包括投资回收期法、抵偿年限法和年计算费用法；动态分析法则包括净现值法、内部回收率法、总费用现值法和最小年费用法。     

钢筋混凝土结构内的钢筋腐蚀监测

用钢筋混凝土修建的建筑物和构筑物，因受外界因素的影响，其内部钢筋可能会受到腐蚀而生锈，锈蚀严重者将危及安全。根据钢筋在混凝土内的锈蚀是一个电化学过程的特点，在不损伤钢筋混凝土结构的条件下，利用腐蚀监测仪，测量钢筋混凝的电化学特性值，并以此特性值绘制等值线图，利用该图能正确评估混凝土内钢筋受腐蚀的情况。     

基于奇异值分解的特征跟踪方法

在传统的基于模板匹配的跟踪方法中，均是给定一个模板，然后从图像中各个位置取出一个个与模板大小一致的区域进行相似性度量，找出与模板距离最小的一个区域作为当前模板，以便进行下一步的匹配跟踪工作。在景象匹配和相关跟踪过程中，由于所面临的大多数是变化的场景，实时获取的图像与预存模板之间存在比较大的差异，传统相关匹配方法的应用就会受到限制；而且在跟踪过程中，随时更新模板会造成跟踪性能对扰动过分敏感，从而产生漂移。首先拍摄目标不同角度的图像（尽可能包含目标可能出现的所有情况），构成目标图像训练集合，抽取出特征矩阵，对它进行奇异值分解，构成一个关于目标的多维空间。然后再用匹配方法在全局范围搜索，找出目标的大致位置，并利用收敛方法在确定的大致位置内进行搜索，确定目标的仿射变换系数，从而得到一个目标位置的确切描述。     

奇异值分解对非定常约束多体系统的动力学分析

通过对约束方程的雅可比矩阵进行奇异值分解，定义组合坐标，从拉格朗日第一类方程出发，建立了非定常约束多体系统的纯微分方程，给出了动力学数值分析的过程，最后举了一个算例。