Drying Characteristics of Barley Grain Dried in a Spouted-Bed and Combined IR-Convection Dryers

A study was performed to determine the drying characteristics and quality of barley grain dried in a laboratory scale spouted-bed dryer at 30, 35, 40, and 45°C and an inlet air velocity of 23 m/s^-1, and in an IR-convection dryer under an infrared radiation intensity of 0.048, 0.061, 0.073, and 0.107 W cm^-2 at an air velocity of 0.5 m/s^-1. The results show that the first, relatively short, phase of a sharp decrease in the drying rate was followed by the phase of a slow decrease. The time of barley drying depended on temperature of inlet air in a spouted-bed dryer and on radiation intensities in an IR-convection dryer. Barley drying at 45°C in a spouted-bed dryer was accompanied by the lowest total energy consumption. The average specific energy consumption was lower and the average efficiency of drying was higher for drying in a spouted-bed dryer. The effective diffusivities were in the range 2.20-4.52 × 10^-11 m² s^-1 and 3.04-4.79 × 10^-11 m²/s^-1 for barley dried in a spouted-bed and in an IR-convection dryer, respectively. There were no significant differences in kernel germination energy and capacity between the two drying methods tested.     

On the improvement of detection characteristics of trans-stilbene crystals by improving crystal perfection

Organic molecular scintillating crystals are noted for their good timing and particle discrimination process. Trans-stilbene is one such candidate noted for its good particle detection characteristics for the past five decades. Progressive strengthening of detection characteristics of trans-stilbene has been attempted by improving crystal perfection. A series of timing resolution studies have been carried out for the Bridgman grown trans-stilbene crystals under different experimental conditions. The results were compared with the previously reported values. Pulse shape discrimination process has been carried out for ²⁴¹Am and ²⁵²Cf sources and good discrimination has been obtained for gamma-alpha and gamma-neutron sources from the grown organic phosphor crystal. Electronic Publication     

Calculation of fatigue limits of case-hardened specimens with consideration of mean stresses and residual stresses

 The strength of case-hardened parts under cyclic loading can be determined in an experimental manner, but this can produce a large amount of costs due to the expenditure of material and testing time. Therefore, a calculation method is developed, that strongly reduces the number of experiments. The presented model is based on Weibull's weakest-link concept and allows to compute the survival probability of a case-hardened part which is loaded close to the fatigue limit. The essential quantities in this model are the distribution of Vicker's hardness of the material, the exponents of the Weibull distribution of the volume and the surface, the residual stress state, the surface roughness and the surface oxidation depth. By integrating the survival probabilities of the surface and the volume, the survival probability of the entire specimen or part can be calculated, which allows to compute the fatigue limit. The necessary parameters have to be determined from reference specimens. The model is successfully examined by comparing experimental and calculated results of smooth and notched case-hardened specimens under alternating torsion, rotating bending, repeated tension and tension-compression. Received 20 August 2001 / Accepted 11 November 2001     

电转化法转化钝顶螺旋藻转化条件的研究

确定了电转化法转化钝项螺旋藻S6-4的转化条件。无论受体是藻丝还是单细胞／藻丝段，钝项螺旋藻S6-4在对数生长期内，半致死电场强度无显著差别。实验表明以对数中期的螺旋藻用于转化为宜。当脉冲时间是5．0ms时，藻丝受体和单细胞／藻丝段受体的半致死电场强度分别是3．75—5．0kV／cm和3．1—4．4kV／cm，而电击缓冲液分别是1．0mmol／L HEPES(pH7．5)缓冲液和含有0．5mol／L蔗糖的1．0mmol／L HEP—ES(pH7．5)缓冲液。本文的研究结果为螺旋藻转化及外源基因表达提供了实验基础。     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

二阶系统变阻尼技术研究

本文基于测速反馈原理，针对二阶系统提出了两种改变系统阻尼的方法。通过适当改变测速反馈系数，可使闭环系统的阻尼比按期望的规律变化（阻尼比可以为负），从而可显著地加快系统的输出响应，使系统的动态性能大为改善。文中提供了仿真算例。     

低温硅双极晶体管基区优化设计

常规双极晶体管在７７Ｋ下电流增益和频率性能都严重退化。本文首先分析了低温双极晶体管基区Ｇｕｍｍｅｌ数，基区方块电阻，渡越时间和穿通电压等参数与温度及基区掺杂的关系，然后讨论了低温双极器件基区的优化设计问题。     

高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。     

APPLICATION OF RESPONSE SURFACE METHODOLOGY FOR THE MAXIMIZATION OF CONCORA CRUSH RESISTANCE OF PAPERBOARD

Response surface methodology is often used by researchers in different fields to determine the optimum values for controlled variables to maximize or minimize the response variables. Either maximization or minimization might be necessary depending on the response property. For example, if the response variable represents the yield of a process, maximization could be necessary; on the other hand, if the response variable is the biological oxygen demand (BOD) of an effluent the aim would definitely be minimization

Response surface methodology can be used two ways. It can be applied to the full-scale production or it can be scaled to a laboratory or the pilot plant. When applied to the full-scale production, the method is known as evolutionary operation (EVOP). EVOP is the continuous optimization of a process. The optimum conditions in a production plant can change depending on many factors such as raw material, ambient temperature, and equipment wear. Therefore, controlled variables should be optimized continuously to keep the response variable as close as possible to the maximum or minimum value. Hence, controlled variables are systematically changed around a center point to depict any shift of the response variable from the extreme. A thorough discussion of EVOP is given by Box, Evolutionary Operation: A Method for Increasing Industrial Productivity, Appl. Statist., 6, 81-101 (1957).     

超宽带无线通信技术概述

主要介绍了超宽带(UWB)无线通信技术的起源、概念及其基本工作原理，包括信号产生、系统构成、天线、接收机、调制方式等，阐述了UWB中的关键技术及性能特点，对UWB的局限性作了简要的介绍。