海明滴定法快速测定废水中的LAS含量

介绍了一种测定废水中LAS浓度的新方法。克服了常规方法亚甲基蓝比色法要绘制标准曲线，操作过程复杂等局限性。该方法测定过程简单，结果准确，标准偏差为1．4l，变异系数为3．92％。     

聚天冬氨酸的合成与表征

以L-天冬氨酸为原料,热缩合成聚天冬氨酸酐,水解得到聚天冬氨酸。采用凝胶色谱法(GPC)测定了聚天冬氨酸的分子量,并用核磁共振(NMR)对其进行了表征。     

Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Atom transfer radical polymerization of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system with different kinds of copper complexes. The partitioning behavior of the copper complexes, including CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipydine (dNbpy), CuCl₂/dNbpy, CuCl/2,2′‐bipydine (bpy), CuCl₂/bpy, CuCl/bis(N,N′‐dimethylaminoethyl)ether (bde), and CuCl₂/bde between the monomer (BMA), and water was studied in detail with ultraviolet‐visible spectroscopy. The results show that with a less hydrophobic ligand, such as bpy or bde, most of the Cu(I) or the Cu(II) complexes migrated from the BMA phase to the aqueous phase, the atom transfer equilibrium was destroyed, and the polymerization was nearly not controlled; it converted to classical emulsion polymerization. As to the very hydrophobic ligand dNbpy, although the partitioning study of the copper complexes indicated that not all the copper species were restricted to the organic phase, the linear correlation between the molecular weight and the monomer conversion and the narrow polydispersities confirmed that the polymerization was still quite well controlled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3175–3179, 2003     

不变黄HDI-PU/P(MMA-HEMA)互穿网络胶粘剂形态与性能的研究翁祥

制备了HDI(1,6-己二异氰酸酯)型聚酯聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸-β羟乙酯)(HDI-PU/P(MMA-HEMA))互穿网络胶粘剂,研究了接枝剂甲基丙烯酸-β羟乙酯(HEMA)用量对其形态、性能与分子结构的影响。结果表明,接枝剂HEMA可使分散相接枝到连续相中形成复合网络,从而改善其界面的相容性,提高其胶液粘度和初粘力,并可广泛作为制鞋工业用胶。     

Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings

A series of soybean oil phosphate ester polyols (SOPEP) was prepared by reaction of fully epoxidized soybean oil with phosphoric acid and simultanoeous hydrolysis in the presence of a polar solvent. The polyols were characterized by determination of acid value, oxirane number, hydroxyl value, molecular weight (GPC), and FTIR spectra. These polyols with varying amounts of acid phosphate groups could be self-emulsified to form aqueous dispersions after neutralization with organic base. These aqueous dispersion showed varying degrees of stability and their appearance ranged from opaque dispersions to translucent to clear solutions. Waterborne coating compositions were prepared using these aqueous dispersions as principal components and their thermally cured film properties were studied. it was found that by careful selection and formulation, SOPEPs can be successfully used for low-VOC waterborne coating formulations. SOPEPs with 3.5% phosphate ester content showed visibly superior corrosion resistance properties.     

车联网中基于雾计算和多TA的条件隐私保护认证方案

车联网在生活中扮演着越来越重要的角色,它可以有效地防止交通拥堵从而减少交通事故。然而,在车联网中总是有非法车辆试图接入车联网并发布虚假消息。此外,现有方案多数存在计算效率低下的问题。针对上述存在的问题进行了研究,提出了一种车联网中基于雾计算和多TA的条件隐私保护认证方案。在保护车辆用户身份的条件下实现了车辆、雾节点、TA三者之间的身份认证,且在车辆追踪阶段可以还原车辆用户的真实身份,从而实现条件隐私保护。雾计算的使用降低了方案的计算和通信开销,同时多TA模型的使用也解决了单TA单点故障的问题。安全性证明和性能分析的结果表明该方案是安全且高效的。最后对当前方案进行了总结以及对未来研究作出了展望。     

铁电晶体TGS的快速生长

报道了TGS晶体的溶液状态及其快速生长的实验结果。发现了pH为2.52的溶液是实现快速生长的最佳溶液,利用快速旋转叶片来加速溶液对流,对于截面积为40mm×40 mm的(010)面,其生长速度达到了5mm/d,对快速生长的TGS晶体的性能研究表明:其热电和介电性能也发生了一些变化。     

Edwards曲线快速标量乘算法研究

标量乘法是椭圆曲线密码算法中最核心的运算,其运算速度影响着整个密码体制的实现效率。首先,详细地介绍了Edwards曲线的基本概念。其次,为了提高标量乘法的运算速度,针对椭圆曲线标量乘算法进行了研究,引入了一种可以用来计算连续倍点2◢△mP◣的算法CDA。为了提高CDA的计算效率,提出了将标量◢k◣表示为4-NNAF形式以减少◢k◣的长度,再结合CDA计算标量乘法可以有效地减少运算量。最后根据算法的运算量分析和具体例子得出,减少标量◢k◣长度后的计算效率提高了13%以上。为了进一步加快运算速度,又提出了对CDA中乘法运算和模逆运算采用并行结构来减少标量乘法的运算次数。计算结果表明,并行后的计算效率提高了36%以上。     

Effects of preparation conditions on the surface modification and performance of polyethersulfone ultrafiltration membranes

The impact that some membrane preparation steps had on ultrafiltration (UF) membrane characteristics and performance was studied. Polyethersulfone (PES) was employed as base polymer, while N‐methyl pyrrolidone (NMP) was used as a solvent, and polyvinylpyrrolidone (PVP) was used as a nonsolvent pore‐forming additive. The manufacturing variables studied were solvent evaporation time and membrane surface modification, using a fluorine‐based copolymer referred to as surface‐modifying macromolecule (SMM). The flat sheet membranes, prepared via phase inversion, were characterized using solute transport data, X‐ray photoelectron spectroscopy (XPS), and contact angle measurements. Membrane performance was evaluated via filtration test protocol that included a 6‐day filtration of concentrated river water. The flux reduction with time was modeled using single and dual mechanisms of fouling. The pore blockage/cake filtration model described better the behavior of the permeation rate along the experiments. Increasing the solvent evaporation time decreased the size of the pores and the permeation rate. However, it did not significantly affect the removal of the organic compounds naturally present in the river water used as feed. XPS and contact angle measurements proved that the short evaporation periods did not allow enough SMM migration to the surface to provoke a significant effect on the membrane performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

KNO_3/γ-Al_2O_3型固体超强碱催化合成香豆素的研究

对以水杨甲醛与乙酸酐为原料合成香豆素的工艺进行了改进。首次采用KNO3/γAl2O3固体超强碱催化剂的工艺路线,提高了产物的收率。同时对催化剂用量、反应物的量比、反应温度的影响进行了研究。结果表明,最佳工艺条件为:n(水杨醛)∶n(乙酸酐)=1.0∶1.6,催化剂用量为水杨醛质量的3%,反应近终点时在(210±2)℃,再保温反应0.5h,香豆素收率可达85%以上。该催化剂具有较高的催化活性,易于回收,可重复使用5次以上。