rried out. The Lagrange multipliers are

boundary conditions. A cell structure which is independent to the nodes is used to evaluate the integrals of EFG     

Utilization of STEP AP 210 at The Boeing Company

Boeing has been working on the development and implementation of STEP AP 210 since its inception. Using a combination of internally funded activities, external government contracts and multi-company pilots, Boeing has developed prototype tools to utilize AP 210 and is poised to move these tools into production. This paper begins with a brief overview of STEP and AP 210. The status of available AP 210 vendor translators (data generators), along with viewers and analysis programs (data consumers) is covered. Discussion continues with present and planned usage of AP 210 in several companies with the primary emphasis on implementation at The Boeing Company. The document concludes with a summary of key points.     

现场总线技术在发电系统数据采集中的应用

介绍了现场总线网络在干熄焦汽轮机发电生产过程中所起的作用，并重点介绍了系统所完成的数据采集，监视和管理等功能。     

城市现有地下管线探查及数据处理方法探讨

该文根据城市地下管线探查及数据处理方法现状 ,结合管线管理单位需要 ,对地下管线探查及数据处理方法中的有关问题进行了探讨 ,供今后管线探测工作借鉴     

The optimisation of higher order resampling methods in a multiprocessor environment

The processing of images obtained from satellites often involves highly repetitive calculations on very large amounts of data. This processing is extremely time consuming when these calculations are performed on sequential machines. Parallel computers are well suited to handling computationally expensive operations such as higher order interpolations on large data sets. This paper decribes work undertaken to develop parallel implementations of a set of resampling procedures on an Alliant VFX/4. Each resampling procedure implemented has been optimised in three stages. First, the algorithm has been restructured, where two-dimensional resampling is performed by two one-dimensional resampling operations. Second, each procedure has been reprogrammed in such a way that the autoparallelisation provided by the FX/Fortran compiler has been exploited. Thirdly, data dependent analysis of each procedure has been performed in order to achieve full optimization of each procedure; each procedure has been restructured where appropriate to circumvent vectorisation and concurrency inhibiting data dependencies. The nature and extent of the code optimization achieved for each procedure is presented in this paper. The original code for the most computationally expensive procedure, as targeted at a sequential machine, was found to have an execution time of 4900 seconds on the Alliant VFX/4 when compiled with regular compiler optimization options. Following algorithmic redesigning and reprogramming of the code, as indicated in stage 1 and stage 2, the execution time was reduced to 248 seconds. Restructuring of the code following data dependency analysis indicated in stage 3 in order to avoid data dependencies and allow concurrency and vectorisation, further reduced execution time to 162 seconds. The consequence of this work is that higher-order resampling methods which had not previous been practical are now routinely performed on the Alliant VFX/4 at the University of Dundee.     

水文自动测报系统防雷的探讨

水文自动测报系统若配备有线／无线（GSM，GPRS）双通道，可提高系统的可靠性，保证系统的畅通。然而，有线组网方式最致命弱点是防雷能力差，针对防雷问题，在实践中探讨其有效途径，论述接地装置的设计、安装中应注意的几个问题，并介绍在实践中电话线防雷从一级防护发展到三级防护，提高防雷的效果，有待在实践中，再认识，再提高。     

激光干涉环圆心位置测定技术及应用

本文利用在平面内绕定轴旋转的线阵ＣＣＤ及微机系统自动测定激光干涉环圆心位置及应用于激光外径千分尺平行度检查仪平行度检查结果的自动数字化输出。     

微机在应变测量中的应用

微机在应变测量中的应用，采用上位机和下位机组合方式．上位机为一台ＩＢＭ－ＰＣ／ＸＴ微机，用于对数据进行后处理．下位机以Ｚ８０－ＣＰＵ为控制器，由传感器、转换器、接口及外设等组成数据采集器，实施对应变、压力和位移等参数的采集、显示和打印（即数据的预处理）．上位机和下位机之间的数据传输，采用串行的方式，通过ＲＳ－２３２接口完成．本文主要以应变的采集处理为例，介绍系统功能、硬件配置及软件设计．     

叠后高分辨率资料处理方法及应用效果

高分辨率勘探是一项系统工程，它由多个环节组成。甚至叠后高发辨率资料处理也是由多个环节组成。本文介绍的叠后高分辨率资料处理流程主要包括Ｌｐ模自适应预测统计反褶积，高频成分补偿，振幅补偿及有色成分校正。文中还就处理流程中各种方法的合理组合，各种方法自身参数的合理选取作了试验和探讨，最后给出了处理实例。