LED显示屏256级灰度控制芯片的FPGA设计

介绍了一种基于DVI接口的LED视频显示系统,包括系统设计框架、LED显示驱动方法的介绍,重点介绍了基于FPGA的LED显示屏256级灰度控制芯片的设计原理与过程.     

Fabrication of a Superhydrophobic Surface from a Smectic Liquid‐Crystal Defect Array

A novel fabrication method is developed for the preparation of superhydrophobic surfaces. The procedure uses focal conic structures of semi‐fluorinated smectic liquid crystals (LCs) whose periodic toric focal conic domains (TFCDs) are prepared on a surface modified substrate. Reactive ion etching (RIE) on the periodic TFCD surface leads to a superhydrophobic surface with a water contact angle of ～160° and a sliding angle of ～2° for a 10 µL water droplet. The results show that this phenomenon is due to the development of a dual‐scale surface roughness arising from the nanoscale protuberance caused by applying the RIE process to the top of the microscale TFCD arrays. The unique surface behavior is further verified by demonstrating that RIE on a flat lamellar liquid crystal film, in which the director is aligned parallel with surface, results in a relatively low hydrophobicity as compared to when periodic TFCDs are subjected to REI. The observations made in this publication suggest that a new approach exists for selecting potential candidates of superhydrophic surface formation based on spontaneous self‐assembly in smectic liquid‐crystalline materials.     

比尺模型上床面切应力研究及应用

用比尺模型研究了湘江洪道刘家坝弯曲型河段的床面切应力，得出了整治工程前后床面切应力的平面分布和阻力沿程的变化。根据试验结果，从河流阻力角度对刘家坝滩整治工程进行了评论。     

Effect of 0.1 at.% zirconium on the cyclic oxidation resistance ofβ-NiAl

The effect of 0.1 at.% Zr (0.2 wt.% Zr) on the cyclic oxidation of hipped -NiAl was studied. Oxidation testing was performed in static air at 1100–1200 °C, using 1-hr exposure cycles for test times up to 3000 hr. The weight change versus time data were modeled with the COSP computer program to analyze and predict cyclic-oxidation behavior. Zr additions significantly change the nature of the scale-spalling process during cooling so that the oxide spalls near the oxide-air interface at a relatively low depth within the scale. Without Zr, the predominantly -Al₂O₃ scale tends to spall randomly to bare metal at relatively high effective-scale-loss rates, particularly at 1150°C and 1200°C. This leads to higher rates of Al consumption for the Zr-free aluminide and much earlier depletion of Al, leading to eventual breakaway (i.e., failure).     

Oxidation-sulfidation behavior of Ni aluminide in oxygen-sulfur mixed-gas atmospheres

Oxidation-sulfidation studies were conducted on sheet samples of nickel aluminide, containing 23.5 at. % Al, 0.5 at. % Hf, and 0.2 at. % B in an annealed condition and after preoxidation treatments. Continuous weight-change measurements were made by a thermogravimetric technique in exposure atmospheres of air, a low- gas mixture, and low- gas mixtures with several levels of sulfur. Detailed scanning electron microscopy (SEM), X-ray, and electron microprobe analyses of the corrosion product scale layers were performed. The air-exposed specimens developed predominantly nickel oxide; the specimen exposed to a low- .     

The location of hydrogen in the kinetics of oxidation of ferrous alloys by superheated steam

The rate of emission of hydrogen from the metal surface and from the oxide surface has been determined during the oxidation of ferrous alloys at 501°C. The kinetics were in accordance with the assumption of a parabolic rate law, and the rate constants were in agreement with those calculated from the thickness of the oxide layer at the end of the reaction. The proportion of hydrogen emitted from the metal to that from the oxide surface showed a dependence on the partial pressure of steam for the 9%Cr-1%Mo alloy at 501°C. The ratio was dependent on the alloy composition, and also on temperature, as shown by results for the 9%Cr-1%Mo alloy at 450 and 552°C. For this alloy, the activation energy and rate constants are consistent with a rate-determining step dependent on cation diffusion. The oxide film is almost impermeable to hydrogen gas. A possible oxidation mechanism is suggested.     

一种大尺度二维直线度精密测量的新方法

本文提出了一种远距离、大范围二维直线度测量的新方法．该方法采用特殊设计的十字线准直激光器及线阵CCD，通过特殊的光学系统结构设计，能在0-20m距离内连续测量，直线度范围可达70mm，精度优于0．1mm，实际测量结果表明，该方法可适应野外作业环境。     

小额支付业务智能网实现方案

阐述采用智能网的体系架构实现小额支付业务时的技术方案和网络组织方案。     

一种全新的数字货架及能力开放平台的研究与应用

随着数字化时代用户对内容消费要求越来越高,传统的业务运营方式存在若干问题.咪咕公司立足于运营商优势,并借鉴互联网行业领先模式,创造性的提出了数字货架及能力开放平台.本文通过分析实际业务场景来提炼平台需求视图,开展系统设计,最终搭建完成四个核心能力的锻造和一个定制化工具.     

Al粉对含铝炸药爆轰性能的影响

为了研究A1粉对含铝炸药爆轰性能的影响,选择以TNT和RDX为基的含铝炸药进行了爆速、爆压和爆热的测量,通过计算得到了含铝炸药的爆轰能量转化率,分析了Al/O摩尔比对爆轰参数及爆轰能量转化率的影响规律.结果表明:随着Al/O摩尔比的增大,含铝炸药的爆压、爆速和爆轰能量转化率均降低,而爆热呈先增大后减小趋势,当Al/O摩尔比为1时,爆热值达到最大.