钢筋混凝土结构空间有限元分析的体梁组合单元

本文提出了一种用于钢筋混凝土结构空间有限元分析的体梁组合单元模型。该模型将混凝土体元内的钢筋作为能承受轴力、剪力、弯矩和扭矩的梁元,根据钢筋和混凝土在单元内的位移协调条件和虚功原理将两者组合成一个单元。体梁组合单元模型能较全面地反映混凝土内钢筋的力学效应,能适应钢筋的任意布置方式,容许用较大的单元对结构进行离散,解决了大型钢筋混凝土结构有限元分析的单元划分问题。数值算例及其与解析解的比较演示了模型的可行性和精度。     

充气集合式高电压并联电容器的几点改进

BAMHL1 1 /3- 72 0 0 - 1× 3W是在总结以往充气集合式高电压并联电容器产品优点的基础上 ,为优化大容量产品结构 ,提高绝缘可靠性和设备技术经济性能而开发的项目。本文着重介绍该产品的内部结构、外壳筋板结构和混合气体绝缘等几点改进。     

工业建筑多层框架的活荷载不利布置

以设防烈度为8度的框架厂房为例，详细分析了活荷载不利布置对框架梁、柱内力的影响，得出何时需要考虑活荷载不利布置、何时不需要考虑活荷载不利布置的结论，可供工程设计参考。     

轻型钢骨结构低层住宅设计荷载分析

本文讨论了北美低层钢骨结构住宅结构设计的荷载问题，包括各类荷载的取值和计算方法，以及荷载组合模式，并提出了在我国相关规范没有出台前，在国内进行设计时应该注意的一些问题。     

The treatment of waste-air containing mixed solvent using a biofilter 2. Treatment of waste-air containing ethanol and toluene in a biofilter

An experiment for five stages of a biofilter-run was performed to investigate the effect of hydrophilic ethanol and hydrophobic toluene on the biodegradation of hydrophobic toluene and hydrophilic ethanol, respectively, when waste-air containing toluene and ethanol was treated by a biofilter. Removal efficiencies of toluene and ethanol began to decrease when inlet load surpassed 90 g/m³/h and 100 g/m³/h consistent with maximum elimination capacities of toluene and ethanol, respectively. At the end of the biofilter-run, removal efficiencies for toluene and ethanol were decreased and maintained at 65% and 40%, respectively. The concentration of toluene at 1st sampling port was raised by factor of two in the 3rd stage of the biofilter run when the inlet load of ethanol co-feed was increased by 1.5 times, while the process conditions of toluene were maintained the same as those of the 2nd stage of biofilter-run. According to the result of Mohseni and Allen, it may be interpreted that removal efficiency of hydrophobic toluene was affected by the presence of hydrophilic ethanol when high load of hydrophobic toluene was applied like that of the 1st sampling port of the biofilter. However it was not the case when a low load of hydrophobic toluene was applied like those of the 2nd, 3rd and 4th sampling ports since hydrophobicity of toluene is much less that of α-pinene. Thus, it may be suggested that biodegradation of hydrophobic VOC was interfered by hydrophilic VOC dissolved in the biolayer and the degree of interference was proportional to the inlet load of hydrophobic VOC as well as that of hydrophilic VOC and was inversely proportional to the solubility of hydrophobic VOC. However, it was inferred that the existence of hydrophobic toluene from waste-air can hardly inversely hinder the removal of hydrophilic ethanol in the biofilter when timeevolutions of hydrophilic ethanol concentrations of this experiment were compared with those of the previous experiment of biofilter to treat waste-air containing ethanol only.     

Employing optimized combinations of one-class classifiers for automated currency validation

Automated currency validation requires a decision to be made regarding the authenticity of a banknote presented to the validation system. This decision often has to be made with little or no information regarding the characteristics of possible counterfeits as is the case for issues of new currency. A method for automated currency validation is presented which segments the whole banknote into different regions, builds individual classifiers on each region and then combines a small subset of the region specific classifiers to provide an overall decision. The segmentation and combination of region specific classifiers to provide optimized false positive and false negative rates is achieved by employing a genetic algorithm. Experiments based on high value notes of Sterling currency were carried out to assess the effectiveness of the proposed solution.     

机床工具产品色彩造型初探

本文针对我国机床工具产品色彩设计的现状,结合具体实例,对色彩造型的实质做了初步的探讨。分析了色彩造型和色彩装饰两种设计观和实践效果;以色彩与形状关系及作用的论证为引,论述色彩造型的三大功能作用。并提出可供机床工具产品色彩设计参考的具体设计方法和手段。     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

催化裂化与气体分离装置间热联合技术改造

利用催化裂化装置低温余热作为气体分离装置的重沸器热源,替代原来的气体分离塔重沸器加热蒸汽,合理利用了催化裂化装置的低温热,减少了催化裂化装置的循环冷却水用量及空冷用电量,又大幅降低了气体分离装置加热蒸汽量,取得了显著的节能效果及经济效益。