企业认证和企业管理国际化

企业管理的国际化要求企业的管理与国际管理相接轨，做到科学有效，提高产品的竞争力。企业认证则为企业提供了国际先进的管理模式，二者结合，使企业在管理中不断发展和完善。     

直播稻田化学除草试验

直播稻田用不同药剂在播种后各一次化除或播种后两次化除都具有很好的除草效果。播后前期是化学除草的关键时期播后前期每６６７米＾２用１０％苄嘧黄隆１５克＋６０％丁划胺６０毫升，１０％苄嘧黄隆１５克＋５０％杀草丹１５０毫升，１７．２％新幼禾葆２４０克或１５．８％幼禾葆２００克防铲均较好。     

Three-dimensional simulation using fixed coarse-grid thermal-fluid scheme and conduction heat transfer scheme in distinct element method

Three-dimensional simulation using particle-thermal-fluid coupling scheme with a mixed Lagrangian-Eulerian approach is presented and the scheme is described by extending author's previous research [Y. Shimizu, 2004. “Fluid Coupling in PFC2D and PFC3D”, numerical modeling in micromechanics via particle methods—2004, Proceeding of 2nd International PFC Conference, Balkema, 2004, pp. 281-287]. The scheme solves the continuity, Navier-Stokes (N-S) and thermal energy equations numerically in Eulerian Cartesian coordinates, then derives pressure, velocity vectors and temperature for each fixed cell by considering particle existence. On the other hand, driving forces and thermal energy from fluid are applied to the particles as external body forces and a source term in the force-displacement law and the heat transfer calculations, respectively. This paper describes the thermal scheme for both fluid and particles. Results of two- and three-dimensional simulations involving forced convective heat transfer by fluid and conduction heat transfer within particles are presented.     

鼠标的组合型腔浇注系统优化设计

本文将注塑系统平衡的理论和数值模拟技术紧密结合起采，研究鼠标组合型腔的浇注系统。如果熔体不能同时到达各浇口并充满各个型腔，将导致压力分布不均匀，使制品的质量下降，以至于出现充不满等问题，本研究对浇注系统优化，得出了一组最佳的浇注系统方案，从而保证熔体能够基本上在同一时间充满型腔，实现熔体的平衡流动。从分析结果可知，要平衡熔体在组合型腔内的流动，分流道的截面形状和尺寸起到非常大的作用。     

一种应用于复杂组合软件的可靠性测试模型

当前复杂的组合型软件可靠性测试一直是一个难点,主要原因是无法多多种差异性较大的软件特征建立可约束的检测分析模型,一旦软件数量过多,模型会迅速陷入不收敛。为了解决这一问题,提出一种复杂组合差异性软件的可靠性分析模型。对组合软件以一种分解的思想对其进行建模。对分解后的软件特征进行重新分区建模。形成多个可测试的子服务特征。运用一种稳定概率统计的观点,对模型进行分析,分析不同区域组合后的稳定概率,进而代表组合后的可靠性结果。仿真实验结果表明,该种模型能改对较多软件组成的、差异性较大的大型软件可靠性进行更为合理的分析,模型鲁棒性较好,能较好完成可靠性分析的工作。     

基于参数估计的半挂汽车列车稳定性控制研究

车辆参数估计是半挂汽车列车稳定性控制研究的关键,通过递推最小二乘法（RLS）估计整车质量和轮胎侧偏刚度,进而获取挂车横摆转动惯量,将估计的车辆参数应用于稳定性控制系统,修正控制系统参数.基于商用车动力学仿真软件TruckSim建立了某半挂汽车列车的非线性整车仿真模型,在Matlab/Simulink中设计建立了稳定性控制逻辑和参考响应模型,通过TruckSim-Simulink的联合仿真对控制方案进行了验证分析.结果表明,基于名义参数设计的控制系统受载重变化的影响较大,而带有参数估计的控制系统由于能够对控制参数进行修正,可以较好地适应载运工况的变化,受载运工况的影响较小.     

对《机械制图》课程教学的几点探索

从如何激发学生的学习兴趣,提高制图教学的课堂教学效果入手,试图解决有限的教学时数与快速膨胀的教学内容之间的矛盾,从而达到提高教学质量的目的。     

Mechanosynthesis of complex oxides and preparation of mixed conducting nanocomposites for catalytic membrane reactors

Nanopowders of LaGaO₃- and LaMnO₃-based complex perovskites (P) and ceria-based fluorites (F) were prepared by mechanosynthesis. Compatible nanocomposites F + P and P + P with mixed ion and electron conducting (MIEC) properties were prepared and sintered at moderate temperatures up to dense ceramics. The obtained materials were studied by means of XRD, SEM, TEM, electrical conductivity measurements, temperature programmed (TP) reduction/oxidation and preliminary estimations of permeability were obtained. A new strategy based on the advantages of the mechanochemical ceramic approach is proposed to design multilayer ceramic membranes for CMR. Casting technology and one-step sintering were used for the production of thin film membranes with MIEC properties on porous substrates. The coarse fraction of as-milled powders from agglomerates with density 70% was used for the porous substrate, and fine fractions of aggregates with sizes <1 μm were used in preparation of composites for thin dense films. Ceria-based composites prepared by the Pechini route and/or mechanochemical method are proposed as materials for protecting thin films.     

混合指示剂单相滴定法测定烷基磷酸酯钾盐

本研究用混合指示剂单相滴定法测定ISO标准方法所不能测定的磷酸盐阴离子表面活性剂的浓度.测定PK、E502A、昆山PK的常数K分别为355.lg/M、420.7g/M和344.0g/M,变异系数分别为1.45%、0.59%和1.26%,测定实际试样的加标回收率为98.2～103.9%.方法准确、简单、快速,不需用毒性较大的有机溶剂,本法适用于化纤油剂和涤纶短纤维上油率等的测定.