Optimized Schwarz methods without overlap for highly heterogeneous media

In this paper an original variant of the Schwarz domain decomposition method is introduced for heterogeneous media. This method uses new optimized interface conditions specially designed to take into account the heterogeneity between the sub-domains on each sides of the interfaces. Numerical experiments illustrate the dependency of the proposed method with respect to several parameters, and confirm the robustness and efficiency of this method based on such optimized interface conditions. Several mesh partitions taking into account multiple cross points are considered in these experiments.     

Method of increasing the output signal-to-noise ratio in passive multi-element antenna arrays

A method of processing complex signals in passive multi-element antenna arrays based on an analysis of the natural values of the correlation matrix of the signal is considered. By means of the method it is possible to substantially increase the output signal-to-noise ratio. An iterational process by means of which optimal estimators of both the signal and the amplitude-phase distribution may be obtained, is proposed. Theoretical estimators of the efficiency of the method are given. It is proved that, in terms of the efficiency, the approach considered in the article comes close to the technique of matched filtration. Results of statistical modeling that confirm the statistical results are presented.     

A new approach to the decomposition of Boolean functions by the method of <Emphasis Type="Italic">q</Emphasis>-partitions. III. Joint decomposition of a function system

The paper considers the set-theoretical approach to the joint decomposition of systems of Boolean functions of variables specified in different representation forms. The approach is based on the method of q-partitions of conjuncterms and concept of decomposition clones. Theorems on joint decomposition of a system of full and partial functions are formulated. The approach is illustrated by examples. Parts I and II of this article are published in No. 5 (2001) and No. 1 (2002). __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 39–58, March–April 2007.     

THE ANALYSIS OF THE SEPARATED LAYERS ALGORITHM BY DOMAIN DECOMPOSITION METHOD

From the principle of of the Domain Decomposition Method (DDM), we analyse the 2nd-order linear elliptic partial differential problems and link the Separated-Layers Algorithm (SLA) with DDM. The mathematical properties of SLA and numerical example are presented to obtain satisfactory computation results. For general linear differential ones, also are the structure of SLA and its characteristics discussed.     

Analysis of a conjugated infinite element method for acoustic scattering

This work is devoted to a study of a conjugated infinite element method for Helmholtz problems in exterior domains. A formulation of this method with Lagrange multipliers defined on (semi-)infinite space is presented and analyzed in a domain decomposition context. The implementation aspects of this method in a parallel industrial acoustic software (SYSNOISE) are described in details. Numerical results show the computational efficiency of this method on acoustic scattering problems.     

Fast, large-scale model predictive control by partial enumeration

Partial enumeration (PE) is presented as a method for treating large, linear model predictive control applications that are out of reach with available MPC methods. PE uses both a table storage method and online optimization to achieve this goal. Versions of PE are shown to be closed-loop stable. PE is applied to an industrial example with more than 250 states, 32 inputs, and a 25-sample control horizon. The performance is less than 0.01% suboptimal, with average speedup factors in the range of 80-220, and worst-case speedups in the range of 4.9-39.2, compared to an existing MPC method. Small tables with only 25-200 entries were used to obtain this performance, while full enumeration is intractable for this example.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

Current collecting efficiency of micro tubular SOFCs

In this study, current collecting efficiency of the micro tubular solid oxide fuel cell (SOFC) was estimated to determine optimum size of the micro tubular SOFC. Two models for collecting current from single terminal (ST) and double terminal (DT) of anode tube were proposed and used to calculate the current collecting efficiency as functions of anode thickness, tube length and operating temperature. It was shown that design of the cell geometry and current correcting method are significantly important to achieve high performance micro tubular SOFC stacks. The efficiency loss estimated from the DT model was about 2–4-fold lower than those of obtained from the ST model. The DT model was shown to be more effective for higher operating temperature and the tube length.     

基于ARMAX模型车辆行驶动态过程的空燃比自校正控制的构建与设计

本文基于自回归滑动平均（ARMAX）控制模型的简要介绍，利用混合信号ISPFLASH微控制器技术，详细介绍了车辆行驶动态过程的空燃比自校正控制（STC）的硬件结构和软件配置及设计方法。     

Using information-systems constructs to study online- and telephone-banking technologies

The research literature has seen a number of studies aimed at understanding customer attitudes towards banking technologies, and thereby providing implications for developmental planning and marketing. However, even though banking technologies have a significant amount of information systems (IS) component to them, there is a paucity of research that considers them from the IS perspective. In this paper, we fill this gap by considering three constructs, namely usefulness, ease of use and usage, that are all rooted in the IS literature. We study user’s perceptions of these constructs, as well as the relationships among them, for both online and telephone banking.