Characterisation of inter-particle forces within agglomerated metallurgical powders

The strength of agglomerates of nickel flash furnace concentrate and dust was determined from experimental observations of agglomerates forming under controlled conditions, combined with mathematical equations from the literature. It was found that the agglomerates had a tensile strength ranging from 0.01 Pa to 38.7 Pa, while inter-particle forces ranged from 2.2 × 10^− 12 N to 1.5 × 10^− 10 N. These values were compared to the expected magnitude of van der Waals, electrostatic, magnetic and capillary forces within the agglomerates, and it was found that both electrostatic and van der Waals forces are likely to contribute to the cohesion of agglomerates, although sub-micron particles and the presence of sufficiently large asperities on the surface of particles limit the magnitude of van der Waals forces. Magnetic forces are large enough to contribute to the cohesion of dust agglomerates, which is in keeping with the high magnetite content of the recycle dust. It is postulated that electrostatic forces, acting over a longer range than van der Waals forces, may be responsible for initially bringing particles together. The methodology for determining inter-particle forces can be applied to the computer modelling of flash smelting systems, as well as other gas/particle systems such as fluidized beds.     

宽频带函数波形产生器的研制

本文介绍以ＭＡＸ０３８为基础而研制的宽频带函数波形产生器，它可以产生２￣２×＾７Ｈｚ频率范围的正弦波、三角波、锯齿波和矩形波以及与它们同步的ＴＴＬ脉冲信号。     

基于Linux的大容量Yaffs文件系统性能优化与实现

针对Yaffs文件系统应用在大容量存储设备时所产生挂载速度慢的问题,提出一种新的改进方法,并在Yaffs2文件系统中进行了实现。通过在Yaffs2文件系统中增加适当的偏移量,使得在扫描挂载文件系统时减少了不必要的扫描时间,从而加快了挂载的速度。在最新的Yaffs2文件系统当中,依据该方法修改Yaffs2源代码,同时,在Linux系统上加入了对改进后文件系统的支持。对改进前后的性能进行分析和实验,表明了该方法的可行性。     

Effect of thermal insulation on microstructural homogeneity and onset temperature of flash sintered materials

The present work aimed to reduce the microstructure heterogeneity inherent to flash sintering by using alumina blankets as a thermal insulator around ZnO cylindrical samples during the sintering process, under different electric field conditions. Thermal insulation significantly reduced the flash onset temperature and the grain size heterogeneity. For higher electric fields, a temperature reduction as high as 480 °C was observed, which also led to lower densification. These findings were discussed in terms of changes in the heat loss dynamics coupled with the adsorbed water retention, both promoted by the applied thermal insulation. A model to estimate the temperature at stage III of flash sintering was proposed. The final temperature reached with thermal insulation did not differ significantly from the ones without it. Thus, thermal insulation could represent an alternative route to flash sinter materials with lower furnace temperatures with energy savings up to 78 % and a more homogeneous microstructure.     

FLASH动画制作课程教学心得

Flash动画制作课程的教学目的是使学生在掌握动画制作基本原理的基础上,融会自己的思维及创意,制作出一部部优秀的Flash作品。本文主要从学生、教师和学校角度探讨如何提高该门课程的教学质量。     

浅谈网页设计中Flash与ASP技术的结合

Flash是美国Macromedia公司推出的一款非常优秀的基于矢量图形的交互式动画设计软件。利用Flash可制作出各种类型的多媒体课件,如:演示型、练习型、学习型、游戏型、资料型等等。由此可以看出Flash已成为当前应用最方便、最快捷、最宜上手的多媒体课件开发软件。而ASP技术的出现,则使动态交互式Web主页的设计成为了一件轻松愉快的工作。该文提出把Flash与ASP二者功能结合起来的想法,有效的解决ASP网页单调的缺点,其次Flash与数据库的连接技术的应用能使我们的工作、生活和学习更加方便和生动。     

基于嵌入式系统的虚拟存储示波器设计与实现

嵌入式系统的发展和普及应用使得在嵌入式系统平台下设计虚拟仪器成为构建仪器系统的新思路。本文提出了使用AD7864与ARM S3C2410构成数据采集系统的方案,设计了AD7864与S3C2410的接口电路;并在此硬件基础上开发了虚拟存储示波器,实现了示波器的功能。     

利用串口进行网络系统互联的设计与实现

为了解决数字微波设备网管系统中利用串口进行网络互联的问题,利用uCLinux系统中Netlink通信机制、网络驱动程序设计等关键技术,结合数字微波设备网管系统的具体设计,提出了基于串口设备的网络系统互联的系统模型,并给出了具体的设计与实现方法。     

基于程序升温法保留时间预测的气-质联用系统构建虚拟实验室

在气-质联用技术的理论研究及实验的基础上,采用Flash 8.0和ActionScript 2.0编程技术构建开放式网络气-质联用系统虚拟实验室。以若干有机物为考察对象,根据程序升温色谱法(PTGC)中保留值与温度及流速的关系,构建了不同色谱分析条件下保留参数的预测模型,同时利用Flash组件技术,构建与虚拟实验配套的气-质联用系统虚拟工作站。     

一种介质设备控制方法

研究了传统的以WDM过滤驱动的方法来实现的设备控制原理.通过对这种传统方法的阐述说明了这种方法存在不够安全、不够灵活等缺点,对微软Windows的高中断级别的自旋锁源码进行反汇编分析,然后以NT过滤驱动的方式尝试实现WDM过滤驱动的机制,最后利用内核例程hook的方法,使用对驱动对象的派遣例程函数入口地址替换提出一种新的实现思路.经过仿真实验表明,这种方法能取得较好的效果.