Nonlinear Creep Damage Model for Concrete under Uniaxial Compression

An isotropic model for creep damage of concrete under uniaxial compression is proposed, where the combined effect of nonlinear viscous strain evolution and crack nucleation and propagation at high stress levels is considered. Strain splitting assumption is used for creep and damage contributions. Creep is modeled by a modified version of solidification theory. As usual in the modeling of damage of concrete, a damage index based on positive strains is introduced. As particular cases, the proposed model reduces to linear viscoelasticity for long time low stress levels whereas, for very high stresses, tertiary creep causing failure at a finite time can be described. The effect of strength variation with time is also included. The model is numerically implemented to perform time integration of nonlinear equations by means of a modified version of exponential algorithm. The model is validated through comparison with experimental results. Some numerical examples are also presented, where the roles of concrete ageing and strength variation with time are investigated.     

Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material

In this work we present the discrete models for dynamic fracture of structures built of brittle materials. The models construction is based on Voronoi cell representation of the heterogeneous structure, with the beam lattice network used to model the cohesive and compressive forces between the neighboring cells. Each lattice component is a geometrically exact shear deformable beam which can describe large rigid body motion and the most salient fracture mechanisms. The latter can be represented through the corresponding form of the beam constitutive equations, which are derived either at microscale with random distribution of material properties or at a mesoscale with average deterministic values. The proposed models are also placed within the framework of dynamics, where special attention is paid to constructing the lattice network mass matrix as well as the corresponding time-stepping schemes. Numerical simulations of compression and bending tests is given to illustrate the models performance.     

A generalization of Vidyasagar's theorem on stabilizability using state detection

In this paper we generalize the Vidyasagar's well known theorem on the local stabilizability problem of nonlinear systems using state detection [11]. Our purpose is to prove that if a system is weakly detectable and stabilizable by means of a continuous state feedback u = γ(x), for which no differentiability assumption is imposed, then the system is also stabilized by the law u = γ(z), where z is the output of a weak detector for the state x. The result above is applicable to several cases not covered by other works.     

Wiener models of direction-dependent dynamic systems

Analysis of systems with direction-dependent dynamics is currently limited to cases in which the dynamics in the two directions of the output are first order; results for such systems have been published for both pseudo-random maximum-length binary (MLB) and inverse-repeat maximum-length binary (IR-MLB) inputs. These relatively limited analytical results make it useful to examine alternative ways of modelling such systems and in this paper, Wiener models are considered for this purpose. Methods for optimising the Wiener model parameters by matching the system and model cross-correlation functions, outputs, and discrete Fourier transforms of the outputs are considered, and the results are compared. These methods are also applied to a first-order direction-dependent system with a maximum-length ternary (MLT) input, for which no analytical results are currently available, and to a second-order system with an IR-MLB input.     

岩心PI值试验研究及应用

主要论述了在多功能采油化学用剂评价仪上进行的岩心ＰＩ值试验的步骤，现象及结论。重点考察了岩心ＰＩ值与渗透率、流量及注入截面面积的关系；平行管岩心复合ＰＩ值和其中单管岩心ＰＩ值的关系。     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

Mathematical modelling of a reverse flow reactor with catalytic surface dynamics

This paper studies a system of partial differential equations modelling the behaviour of a reverse flow reactor. For the parameters appropriate for the oxidation of ammonia on a Pt/Al₂O₃ catalyst in a typical laboratory set-up, the reactor may be split into regions where approximate formulas that determine its behaviour are deduced. Numerical calculations are presented and can be used to compare with the analytical formulas. The physical insight gained from the asymptotic analysis suggests a new switching strategy which is the subject of numerical experiments. The switching strategy is found to be efficient at minimising the ammonia exiting the reactor after reversal.     

Closed-loop automatic tuning of PID controller for nonlinear systems

In this paper, a robust control system is first proposed which is suitable for the control of a class of nonlinear systems. A parallel connection of a relay to a proportional integral derivative (PID) controller collectively forms the robust controller. The relay ensures robust control by providing a high feedback gain, but it also induces a control chattering phenomenon. Instead of viewing chattering as an undesirable yet inevitable feature, the chattering signals are used as natural excitation signals for identifying an equivalent PID controller using the recursive least squares algorithm. No other explicit input signal is required. Analysis is provided on the stability properties of the control scheme. Simulation results for the level control of fluid in a spherical tank using the scheme are presented.     

Accurate higher-order analytical approximate solutions to nonconservative nonlinear oscillators and application to van der Pol damped oscillators

In general, this paper deals with general nonlinear oscillations of a nonconservative and single degree-of-freedom system with odd nonlinearity and, in particular, it presents accurate higher-order analytical approximate solutions to van der Pol damped nonlinear oscillators having odd nonlinearity and the Rayleigh equation. By combining the linearization of the governing equation with harmonic balancing and the method of averaging, we establish accurate analytical approximate solutions for the general weakly damped nonlinear systems. Unlike the classical harmonic balance method, simple linear algebraic equations instead of nonlinear algebraic equations are obtained upon linearization prior to harmonic balancing. The combination of these two methods results in very accurate transient response of the periodic solution. In addition and for the first time, this paper also presents a method for deducing fourth-, fifth- and higher-order linearized governing equations from the lower-order equations without the requirement of formulating the problem from the first principle. Three examples including the van der Pol damped nonlinear oscillator are presented to illustrate the excellent agreement with approximate solution using the exact frequency.     

Two-degree-of-freedom output feedback controllers for discrete-time nonlinear systems

A discrete-time, model-based output feedback control structure for nonlinear processes is developed in the present work. The structure makes use of a closed-loop observer, while at the same time it guarantees that the overall feedback controller possesses integral action. An algebraic transformation is applied on the observer states to insure that the input/output gain of the observer matches the model upon which the static state feedback control law is based. The resulting control algorithm is a two-degree-of-freedom control law, in the sense that the output and the set point are processed in different ways. The control structure is shown not only to have the same properties as the standard model-state feedback structure, but also that it emerges from a model algorithmic control framework. Finally, a simulation example using an exothermic CSTR operating at an open-loop unstable steady state is used to evaluate the closed-loop performance of the proposed method.