化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

A BOUNDARY INTEGRAL EQUATION AND ITS NUMERICAL SOLUTION OF POTENTIAL FLOW AROUND SURFACE-IRREGULA-RITIES

In this paper,using complex functional theory,the authors turn the potentialflow around the surface irregularities in a pressure conduit and semi-infinite platforms intoDirichlet problem.Based on Schwarz formula and by the application of Plemelj's formula,theauthors change the problem into the integration of a Cauchy boundary integral equation in theflow plane through the substitution of variables.Using numerical integration,the authors obtainthe velocity distribution and pressure coefficient along surface irregularities and platforms.Thephysical concept of this method is clear,the convergent speed is rapid and the computative effi-ciency is high.The calculated values agree well with the measured results.It is an effective andsimple method in solving potential flow.     

分析恒载效应的有限元方法

本文在Takabatake关于恒载对梁静、动力影响的研究工作的基础上,导出了梁考虑恒载效应的动力分析有限元公式,提出了荷载影响刚度矩阵的概念。分析了分布和集中两种恒载型式对简支梁和悬臂梁自振特性的影响。计算结果表明,用本文方法与Takabatake应用Galerkin方法和近似闭合解方法的结果吻合良好。同时由于本文采用了矩阵形式,不仅便于编制计算机程序,且使方法有更广泛的适用性和灵活性,可更方便地用于各种不同的构造和边界条件下的实际结构。     

含钇奥氏体基堆焊焊条堆焊层研究

针对高温、磨损、热疲劳工况下服役零件的失效，研制了一种含稀土元素钇的奥氏体基沉淀强化型堆焊焊条，并对堆焊层组织与性能进行了较系统的研究。     

单元系T—p相图的数学结构

作者以化学元素的稳定单质为基准,推演出了任意物质M_i(相态Ω)的热力学生成活度{相态Ω)的函数形式:?D_Ω数值的大小体现着相态Ω的热力学相对稳定性.根据集合论原理沿D(稳定性)座标取极大值的方法把物理性质互不连续的各个异相态连结在一起,建立了单元系在T-p面上的优势分布方程(PSDE):■作者以H_2O为实例,计算了T-p相图,与实验相图基本一致.     

Neural Network Feedback Control: Work at UTA’s Automation and Robotics Research Institute

This is an outline of research in neural networks for feedback control done since the mid 1990s at the Automation and Robotics Research Institute (ARRI) of The University of Texas at Arlington (UTA). It shows how the developments of Intelligent Control Systems based on neural networks have followed three main generations. This statement provides a short, broad-brush perspective on the development of intelligent neural feedback controllers.     

垄作冷渍型稻田氮、磷、钾化肥适宜施量及施用方法研究

通过垄畦栽冷渍型稻田早、中稻化肥不同施量及施用方法的田间试验,建立氮、磷、钾化肥施用量与产量的回归方程,推导出早、中稻氮、磷、钾化肥最佳施用量;在施肥量相等情况下,深施比表施肥效好,钾肥不足情况下,以稻草代钾肥同样取得较好增产效果。     

A stochastic maximum principle for systems with jumps, with applications to finance

We consider a stochastic control problem with linear dynamics with jumps, convex cost criterion, and convex state constraint, in which the control enters the drift, the diffusion, and the jump coefficients. We allow these coefficients to be random, and do not impose any L^p-bounds on the control.

We obtain a stochastic maximum principle for this model that provides both necessary and sufficient conditions of optimality. This is the first version of the stochastic maximum principle that covers the consumption–investment problem in which there are jumps in the price system.     

电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。