加载单极子天线的时域辐射特性

基本的单极子天线由于其本身的特社会在天线内部对馈入的信号进行多次反射，严重,制约着它的辐射性能。采用时域有限差分法对比计算了加载与非加载单极子天线的时域辐射特性。计算结果表明，加载是改善单极子天线时域辐射性能的最佳选择，但需要以牺牲辐射效率为代价。     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

PARASITIC TOLERANT DIFFERENTIAL SC TRANSCONDUCTANCE USING UNITY GAIN BUFFERS

The unity gain buffer will be good to design high frequency SCF if its resistiveeffects can be eliminated,and therefore the whole parasitic sensitivities will greatly be reduced.On the basis of this concept,a novel parasitic tolerant SC DTE(differential transconductanceelement)is proposed.SC floating inductor and integrator fit for high frequency applications areformed by the DTE.The computer simulation and experiment on a third order elliptic LP filterverify its validity.     

像增强器亮度增益和等效背景照度测试仪的研制

亮度增益和等效背景照度是衡量像增强器性能的两个重要参数，针对这两个参数的测试要求，阐述像增强器亮度增益和等效背景的测试原理和测试仪的结构设计。利用研制的测试仪对多种型号的像增强器的亮度增益和等效背景照度进行了测试，给出并分析了测试结果。结果表明，本测试仪的结构设计是合理有效的。     

整体毡纤维体积分数对CVD增密的影响

将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1.52 g/cm~3。     

Artificial Neural Network Modeling of Osmotic Dehydration Mass Transfer Kinetics of Fruits

Artificial neural network (ANN) models were developed for the prediction of transient moisture loss (ML) and solid gain (SG) in osmotic dehydration of fruits using process kinetics data from the literature. ANN models for ML and SG were developed based on data over a broad range of operating conditions and ten common processing variables: temperature and concentration of osmotic solution, immersion time, initial water and solid content of the fruit, porosity, surface area, characteristic length, solution-to-fruit mass ratio, and agitation level. The trained models were able to accurately predict the outputs with associated regression coefficients (r) of 0.96 and 0.93, respectively, for ML and SG. These ANN models performed much better than those obtained from linear multivariate regression analysis. The large number of process variables and their wide ranges considered along with their easy implementation in a spreadsheet make them very useful and practical for process design and control.     

Miniaturization and bandwidth enhancement of a cavity backed circular microstrip patch antenna

The resonant frequency of a circular patch antenna with and without circular cavity is measured. The patch miniaturization in the presence of the cavity is proved. Different methods of reducing resonant frequencies and broadening bandwidth without significantly reducing antenna gain are presented. Capacitively loaded patch and slits on the patch stimulate the patch at lower frequencies and multiple resonances, thus help miniaturization. Finally ferrite loading on the feed probe further increases the bandwidth without significantly reducing the antenna gain. The method is much more improved than that for a resistive loaded patch and a deformed patch. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007.     

An efficient controller structure with minimum roundoff noise gain

Based on a polynomial operator approach, a new sparse controller structure is derived, which is actually an improved version of the recently proposed structure [Li, G. (2004). A polynomial-operator-based DFIIt structure for IIR filters. IEEE Transactions on Circuits and Systems II, 51, 147-151]. The performance of the proposed structure is analyzed by deriving the corresponding expression of roundoff noise gain and the problem of finding optimized sparse structures is solved efficiently with a genetic algorithm (GA). A numerical example is given, which shows that the newly developed structure can achieve much better performance than some well-known structures and particularly outperforms the traditional optimal fully parametrized realization greatly in terms of reducing roundoff noise and implementation complexity.     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ     

中国先进研究堆冷中子源核发热和冷中子增益研究

为准确计算和研究中国先进研究堆（CARR）冷中子源装置氢系统的核发热和冷中子增益，建立了一整套计算方法。对参考堆的验证计算证明了该方法的正确性和有效性。对影响CARR冷中子源核发热和冷中子增益的各种因素（如慢化剂、冷包材料、冷包形状等）进行了计算和优化选择。结果表明：在核发热量较小的条件下获得了较好的冷中子增益。