CASE与MIS的开发

本文介绍ＣＡＳＥ技术的基本思想与构成，ＣＡＳＥ工具在ＭＩＳ开发中的作用，概要介绍国内流行的ＣＡＳＥ产品并对其作出评述。     

单片机系统的抗干扰问题研究

单片机应用系统在使用过程中存在大量的干扰源,严重影响了系统运行的可靠性。文章阐述了干扰对单片机测控系统产生的不良影响,介绍了单片机应用系统在设计过程中的硬件和软件抗干扰技术。     

HSP50214在软件无线电中的应用

介绍了下变频器HSP50214的功能和主要特性，结合实际分析了他在常规通信系统、FDMA，TDMA和CDMA通信系统中的应用。     

构件重用技术在雷达软件中的应用

随着雷达软件系统技术的发展 ,软件规模、复杂度也越来越大 ,对开发、调试、功能升级等带来难度。文中提出了利用构件技术开发雷达软件系统的思想 ,并给出利用构件技术研制雷达软件系统的基本思路     

应用多抽样率信号处理实现SSB调制信号

在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。     

Tradeoffs in granularity and parallelization for a Monte Carlo shower simulation code

The EGS4 code, developed at Stanford Linear Accelerator Center, simulates electron-photon cascading phenomena. The original code is inherently sequential: processing one particle at a time. This paper reports on a series of experiments in parallelizing different versions of EGS4. Our parallel experiments were run on a 30-processor Sequent Balance B21 and a 6-processor Symmetry S27. We have considered the following approaches for parallel execution of this application code:

1. (1) Original sequential version modified for parallel processing: 1 processor;

2. (2) Version 1 run multiprocessed: 1 to 29 processors;

3. (3) Sequential version modified for large-grain parallel processing: 1 procssor;

4. (4) Version 3 run using the Sequent Microtasking Library: 1 to 29 processors.

For each approach, we discuss the relative advantages and disadvantages in the areas of coding effort, understandability and portability, as well as performance, and outline a new parallelization approach we are currently pursuing based on Large-Grain Data Flow techniques.     

用有限元确定起重机裂纹补强板的参数

采用ANSYS有限元分析软件，对因出现裂纹的起重机主梁而添加的补强板进行系列计算，得出修补后主梁裂纹的应力及应力强度因子的变化规律。结果表明，采用参数适当的补强板，可降低起重机主梁裂纹尖端的应力，从而保证起重机的安全。     

MAXIMUM ENTROPY DECONVOLUTION OF XPS PEAK

Necessity of XPS spectrum,deconvolution,disadvantages of the traditional Fast Fourier Tranderm decon-volution method(FFT),princtple,method and advantage ofMaximum Entropy Deconvolution Method (MEM) are de-scribed.Criteria for determing the number of data points sam-pled in MEM are the main point disccussed in the paper,someXPS deconvolution applications of our MEM software showthat the MEM makes XPS deconvolution much easier than thetraditional FFT method.     

An integrated automatic test data generation system

The Godzilla automatic test data generator is an integrated collection of tools that implements a relatively new test data generation method—constraint-based testing—that is based on mutation analysis. Constraint-based testing integrates mutation analysis with several other testing techniques, including statement coverage, branch coverage, domain perturbation, and symbolic evaluation. Because Godzilla uses a rule-based approach to generate test data, it is easily extendible to allow new testing techniques to be integrated into the current system. This article describes the system that has been built to implement constraint-based testing. Godzilla's design emphasizes orthogonality and modularity, allowing relatively easy extensions. Godzilla's internal structure and algorithms are described with emphasis on internal structures of the system and the engineering problems that were solved during the implementation.Parts of this research were supported by Contract F30602-85-C-0255 through Rome Air Development Center while the author was a graduate student at the Georgia Institute of Technology.     

WXJB—E型多点温度监测报警仪的研制

本文介绍了 WXJB—E 型多点温度监测报警仪的设计思想、基本原理、技术关键、技术指标及其功能。