特钢长型材轧制技术新进展

在可持续发展原则指导下，强化控轧控冷、高精度轧制和改进表面与外形质量是当前特钢轧制技术发展的重点。     

Modelling diffusion-controlled kinetics in equilibrium and driven alloys

Summary We introduce a very simple model for thermally activated atomic migration on a lattice, and several techniques to handle it. For thermodynamical systems, the model can be used for simulating decomposition paths taking into account relevant metallurgical features. Close to equilibrium, the simplest mean-field approximation of the model can be linearized with respect to the departure from equilibrium; one then gets a microscopic interpretation of classical phenomenological coefficients, such as mobility, interfacial transfer coefficient, rate constants for the coupled relaxation of concentration and order fields. Further away from the equilibrium, the nonlinearities can be taken into account in a consistent way. For driven alloys, i.e. alloys submitted to external forcing, forced atomic migration is added to the model and new features emerge: the model is supported by several experimental results some of which confirmed its predictions a posteriori.     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

DFMC在水利机械产品开发中的应用研究

分析了DFMC(大规模定制设计)关键技术及相关技术,提出了运用该项技术开发产品企业应作好的前期准备,研究了水利机械产品"大型移动启闭机"的定制开发。     

新城金矿采场落矿控制爆破技术

新城金矿为蚀变岩型金矿床,由于受地质构造影响,顶板稳定性较差,局部和较大面积的顶板冒落现象时有发生,为了解决采场顶板安全问题和提高落矿主要技术经济指标而进行了“上向水平分层尾砂胶结充填法采场控制爆破技术”的试验研究工作,试验达到了预期效果。     

Development and implementation of a NURBS curve motion interpolator

This paper deals with the issues of development and implementation of a real-time NURBS interpolator for a six-axis robot. Using an open-architecture controller system as a testbed, a real-time NURBS curve interpolator was developed, implemented and tested. Sample runs were conducted with the resulting trajectories measured in real-time during robot motion. The resulting trajectories are analyzed, discussed and compared with those from a commonly used point-to-point approximation technique. The real-time NURBS curve interpolator's feasibility, advantages and related issues are also discussed.     

国外柴油机用粉末冶金气门阀座概述

概述了国外粉末冶金气门阀座的制造工艺特点,简要介绍了国外柴油机用粉末冶金气门阀座材料的性能水平。     

Radiosity with Well Distributed Ray Sets

In this paper we present a new radiosity algorithm, based on the notion of a well distributed ray set (WDRS). A WDRS is a set of rays, connecting mutually visible points and patches, that forms an approximate representation of the radiosity operator and the radiosity distribution. We propose an algorithm that constructs an optimal WDRS for a given accuracy and mesh. The construction is based on discrete importance sampling as in previously proposed stochastic radiosity algorithms, and on quasi Monte Carlo sampling. Quasi Monte Carlo sampling leads to faster convergence rates and the fact that the sampling is deterministic makes it possible to represent the well distributed ray set very efficiently in computer memory. Like previously proposed stochastic radiosity algorithms, the new algorithm is well suited for computing the radiance distribution in very complex diffuse scenes, when it is not feasible to explicitly compute and store form factors as in classical radiosity algorithms. Experiments show that the new algorithm is often more efficient than previously proposed Monte Carlo radiosity algorithms by half an order of magnitude and more.     

虚拟现实技术在反恐训练中的研究进展

介绍了虚拟现实技术的国内外研究现状,以及仿真技术与虚拟现实技术结合使用的发展趋势.为了更好地履行反恐使命,适应形势的发展,有必要提高反恐教学训练质量,创新反恐行动教学训练手段.将仿真技术和虚拟现实技术应用于路边炸弹的虚拟及仿真,能使反恐受训者不受时间、空间、经费和器材的限制,利用各种3D虚拟模型任意组装不同起爆方式下的路边炸弹,拓展其想象空间和创新思维,使之对路边炸弹的结构组成、工作原理及爆炸效应等有深刻理解.     

一种改进的基于多项式滤波的稳态检测方法

化工过程的数据中常常含有较多的随机误差和粗差干扰,导致传统的稳态检测方法无法得到准确的结果,从而降低系统故障诊断的可靠性。针对实际的工业过程数据,提出一种融合自适应平滑技术的稳态检测方法,该方法首先以基于导数分析的自适应平滑算法进行降噪处理,消除随机误差的影响,然后引入阈值拟合技术进一步抑制粗差干扰,以多项式滤波方法对数据进行稳态检测,根据测量信号的趋势特征确定过程是否处于稳态。仿真实验研究表明:融合自适应平滑技术的稳态检测方法能够克服传统稳态检测方法中随机误差和粗差干扰对检测结果的影响,进而显著提高稳态检测处理的准确性,检测结果明显优于传统的基于多项式滤波的检测方法。