Application of optical transmission interferometry for in-situ structural investigations of titanium dioxide sputter-deposited coatings

Titanium dioxide coatings (from 0.1 to 1.5 μm thick) have been dc sputter-deposited on glass slides from titanium targets in various Ar-O₂ reactive gas mixtures. Deposition rate and optical properties were controlled in-situ by optical transmission interferometry (OTI) with an optical fibre located behind the glass substrate in order to perform a real-time control of transmittance of the growing film. Thus, it is possible to determine in-situ the optical indices (n, k) and the thickness of the as-deposited film by using a simple simulation, developed on Matlab software. The optical properties of the films were investigated in relation to their structure, which depends on the sputtering conditions adopted. In particular, the effects of the sputtering pressure (working pressure and oxygen partial pressure), the discharge power and the substrate location into the reactor are investigated in detail. Films structure is assessed by standard grazing incidence X-ray diffraction (XRD).     

光学薄膜元器件外观特性机器视觉检测系统

本系统利用工业级摄像头及开发包的机器视觉功能与计算软件编程控制技术相结合,通过与输入控制系统中的标准膜片模板外观品质进行对比,实现高速高效、准确识别检测光学薄膜器件中滤光片的外观缺陷。可在生产线上根据外观品质标准模板中设定的类别进行自动分类装盒。     

New insights on survivability in multi-domain optical networks

With the development of intelligent optical networks and the general multi-protocol label switching (GMPLS) technique, the seamless convergence between IP network and optical network is no longer be a dream but a practical reality. Similar to the Internet, current optical networks have been divided into multiple domains each of which has its own network provider and management policy. Therefore, the development of multi-domain optical networks will be the trend of new-generation intelligent optical networks, and GMPLS-based survivability for multi-domain optical networks will become a hot topic of research in the future. This paper provides a comprehensive review of the existing survivable schemes in multi-domain optical networks and analyzes the shortcomings of current research. Based on previous studies, we present possible challenges and propose new ideas to design efficient survivable schemes to guide the future work of researchers in multi-domain optical networks.     

Stabilizing switching design for switched linear systems: A state-feedback path-wise switching approach

This paper addresses the problem of switching stabilization for discrete-time switched linear systems. Based on the abstraction-aggregation methodology, we propose a state-feedback path-wise switching law, which is a state-feedback concatenation from a finite set of switching paths each defined over a finite time interval. We prove that the set of state-feedback path-wise switching laws is universal in the sense that any stabilizable switched linear system admits a stabilizing switching law in this set. We further develop a computational procedure to calculate a stabilizing switching law in the set.     

一种智能光纤位移传感器

介绍一种用神经网络实现无级查表功能的光纤位移传感器。其非线性误差小于0．3％FS。具体介绍了硬件原理和使用神经网络的方法。     

Coinage Metals in the Nanometer Length Scale

Cetylpyridinium chloride (CPC)-stabilized gold organosol in toluene has been prepared by using a two-phase (water-toluene) extraction of AuCl₄^- followed by its reduction with sodium borohydride in the presence of the surfactant, CPC. The surfactant-stabilized gold nanoparticles were exploited to examine their optical properties when exposed to various solvent systems by measuring the changes in the localized surface plasmon resonance (LSPR) spectrum.     

Fabrication of Er3+/Pr3+ Co-doped soda-lime glass thin films using RF magnetron sputtering method and optical property characterization

Er^3+/Pr³⁺ co-doped soda-lime glass thin films have been fabricated using RF magnetron sputtering method and their structural and optical properties have been studied. Deposition rate, crystallinity, and composition of glass thin films were investigated by scanning electron microscopy, transmission electron microscopy, and electron probe micro area analysis. Refractive index, birefringence and binding characteristics have been investigated using a prism coupler and X-ray photoelectron spectroscopy. Er³⁺/Pr³⁺ co-doped soda lime glass thin films were prepared by changing substrate temperature (room temp. ∼550^∘C), RF power (90 W–130 W), and Ar/O₂ gas flow ratio at processing pressure of 4 mTorr. Glass thin films could be obtained at the optimized processing condition at 350^∘C, RF power of 130 W, and gas flow of Ar:O₂ = 40:0 with maximum deposition rate of 1.6 μm/h. Refractive index and birefringence increased from 1.5614 to 1.5838 and from 0.000154 to 0.000552, respectively, as the content of Pr³⁺ increased. Binding energy of Pr3d also increased as the content of Pr³⁺ increased.