Optical switching properties of RCo2-type alloy thin films by electrochemical hydrogenation

The switchable optical properties of Pd-protected RCo₂-type Ho_0.6Mm_0.4Co₂ alloy thin films have been investigated in a KOH electrolyte. The reversible optical switching has been carried out simultaneously by measuring transmitted light through the thin film during electrochemical charging–discharging of hydrogen. The dependence of switching speed and cyclic durability of the film on the charging and discharging current density as well as concentration of KOH electrolyte has been studied. In addition, cyclic voltammetric measurements have been performed to examine the hydride formation and decomposition reactions.     

Structural study of cubic pyrochlores based on quantum mechanical simulation

In the ideal A₂B₂O₆O′ pyrochlore structure, the x-value of O atom position is a variable parameter. In Bi_1.5ZnNb_1.5−xTa_xO₇ (BZNT) cubic pyrochlores, the x-values alter with the different compositions of Nb/Ta. In this work, a series of initial models for BZNT were established by analyzing X-ray diffraction data. Then three structure modifying methods, including Rietveld refinement, Rietveld refinement with energy and geometry optimization based on quantum mechanics, were employed to obtain the precise models using Materials Studio. Moreover, the reflectivities of BZNT were computed by quantum mechanical simulation based on the refined models. Comparing the simulation results from different modifying models with the experimental results, it is found that Rietveld refinement with energy optimization is the most accurate method for BZNT pyrochlores. According to the simulation results, the different reflectivities correspond well with various x-values of O atom positions in BZNT pyrochlores.     

Novel electro-optic properties of epitaxially grown (Pb, La)(Zr, Ti)O3 (PLZT) thin films derived by advanced sol–gel methods

Advanced sol–gel methods using a secondary solvent addition into (Pb, La)(Zr, Ti)O₃ (PLZT) sol–gel solution and a methanol pre-treatment of sapphire substrates are demonstrated. For the secondary solvent addition, the additive affected the crystallinity and electro-optic (EO) property of PLZT films and only methanol addition can improve them. In addition, the methanol pre-treatment is also appeared to be effective to improve film characteristics.

Through these optimizations, epitaxially grown PLZT thin films on r-cut sapphire are obtained and a high Pockels coefficient which is comparable to those of bulk PLZTs is achieved. It is believed that these PLZT thin films are applicable for integrated EO devices and open the door for the future data communication systems.     

精品光网络建设策略--智能光网络的引入

简要介绍了ASON技术的特点、ASON的引入为新一代光网络带来的好处及衡量网络质量的一些参数和注意事项。     

Average consensus in networks of dynamic agents with switching topologies and multiple time-varying delays

In this paper, we discuss average consensus problem in undirected networks of dynamic agents with fixed and switching topologies as well as multiple time-varying communication delays. By employing a linear matrix inequality method, we prove that all the nodes in the network achieve average consensus asymptotically for appropriate communication delays if the network topology is connected. Particularly, several feasible linear matrix inequalities are established to determine the maximal allowable upper bound of time-varying communication delays. Numerical examples are given to demonstrate the effectiveness and the sharpness of the theoretical results.     

Colloidal Photonic Crystals Doped with Gold Nanoparticles: Spectroscopy and Optical Switching Properties

Polystyrene artificial opals with few gold nanoparticles (AuNp) embedded in the interstices (doping) are grown by using the meniscus technique starting from a mixed suspension of microspheres and AuNp. Samples having different sphere diameters and nanoparticle loads have been prepared. Their reflectance spectra clearly show a dramatic bathochromic shift of the photonic stop band (up to 1400 cm^–1) and a reduction of its full width half maximum, due to an increase of the effective refractive index of about 8 % with respect to bare opals, which is accounted for by analytical theoretical models. Reflectance spectra do not show any direct evidence of AuNp absorption even at the higher AuNp doping level. Nanosecond transient absorption measurements on these systems indicate that a variation of transmission (optical switching) of about 150 % is observed for AuNp doped opals upon photoexcitation with 9 ns laser pulses at 532 nm. No switching is instead observed for bare opals.     

Interfacial hybridization kinetics of oligonucleotides immobilized onto fused silica surfaces

Fused silica optical fibers have been used in an intrinsic mode optical configuration as biosensors for fluorescence based detection of hybridization of nucleic acids. In this work, the kinetics of hybridization of single-stranded oligonucleotides that were covalently immobilized were studied. The probe DNA was dT₂₀, and the target was Fluorescein-labeled non-complementary (dT₂₀) or complementary (dA₂₀) oligonucleotide. Chronofluorimetric monitoring of the adsorption and hybridization processes was used to investigate oligonucleotide films of different density, in different salt concentrations, at temperatures of 25 and 40 °C, with the concentration of the target DNA being 0.005–0.1 μM. Mathematical models based on first- and second-order Langmuir adsorption have been examined to describe both the adsorption and the hybridization processes. Experimental data were processed using the models, and the hybridization kinetics were calculated. Hybridization kinetics on these optical fiber DNA sensors was found to be up to three orders faster than results presented for a number of other experiments using different immobilization chemistries.     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

近年西方国家通信网发展动态

首先说明西方国家通信网近年发展变迁情况，然后对IP与WDM的结合使用、光数据网的发展、密集波分多路的应用和光网中通路的保护4个主要方面作了具体说明。