流体势与油气运聚规律研究——以孤东地区为例

流体势是地下流体所有能的综合表现,不同的流体(如油、气、水)在各自的势场作用下,有各自的势场分布规律运动.通过研究地下流体势空间分布模式,可确定盆地流体系统构成,提高对油气运移规律的认识,明确预测有利油气聚集区,提高钻探成功率.研究表明,孤东地区地下流体势类型分为高势区、低势区,高势区分布与活跃生油洼陷分布一致,是孤东地区油气成藏的主要烃源区和动力源区.低势区与目前的油气田吻合较好.由此可依据流体低势区来预测新的油气聚集部位.      

GC–MS characterization of oligomers in polyadipates used as plasticizers for PVC in food contact

Fourteen commercial polyadipates and a polysebacate were analysed for their components of a molecular mass below 1000 Da, primarily with the aim of generating the background data for measuring the migration of this type of polymeric additives from plasticized PVC (e.g. cling films and gaskets of lids) into foods or food simulants. Since the composition of the material <1000 Da varies between the polyadipates, the main components must be identified to enable a correct quantification. Polyadipates differ in the diol used as linker, their termination (acid or alcohol) and in the end‐capping (free alcohols, acetylation, acylation with fatty acids, esterification with octanol/decanol). Gas chromatography (GC) provides good separation, but the material remaining in the column up to high temperatures decomposes and forms a hump in the rear part of the chromatogram. Examples of mass spectra are shown, the most indicative fragments pointed out and spectra of 159 components listed. The polyadipates and the sebacate are characterized by their structure, the main components <1000 Da and the fraction of material <1000 Da. Copyright © 2006 John Wiley & Sons, Ltd.     

Structural modelling of coprecipitated VTiO catalysts

A statistical study of the particle shape and size of pure V₂O₅ and TiO₂, and samples of coprecipitated V₂O₅---TiO₂ catalysts with different V/Ti ratios, has been performed. They were also characterized by XRD, EDAX, SEM and XPS. The results showed that pure vanadium pentoxide is compose by large square or needle-shaped particles, while pure titanium dioxide has small and rounded ones. VTiO samples presented an area and shape, depending on the V/Ti ratio.

These results and the spectroscopical characterization conducted to a particle model of the catalysts. Those VOTi samples with high V/Ti ratio would have large V₂O₅ crystals acting as support of a V/TiO₂ solid solution. In contrast, those samples with a low V/Ti ratio, would have the solid solution supporting vanadium pentoxide crystals.     

Influence of Two Salicylate Components on the Particle Size of an Oil-in-Water Emulsion with Nonionic Surfactants

This paper reports a study undertaken using techniques of static and dynamic light scattering to investigate the influence of sodium salicylate and methyl salicylate on droplet size of oil-in-water emulsions. The rates of changes were measured by determining the size and distribution of the oil droplet in the material. All emulsions showed a bimodal size distribution; the mean diameters and polydispersity were calculated from intensity. These data were analyzed with nonlinear regressions and bootstrap methodology. An amount of methyl salicylate component induced a decrease of mean diameter and standard deviation. On the contrary, sodium salicylate entailed the growth of all droplet populations and coalescence for the highest concentration.     

人口系统迁移过程的参数辨识及其仿真

本文以系统辨识为工具，提出了迁移过程定量研究的一种方法，即运用随机牛顿法于时变系统中以辨识模型迁移表参量，同时结合卡尔曼滤波技术辨识迁移过程中另一参数－总和迁移率，将这两者融为一体，形成了辨识迁移模型参量的递推算法。本文又借助微分方程的稳定性理论讨论了净迁移情形下的辨识算法的收敛性，给出算法收敛的一个充分条件。     

厚膜导体的金属迁移研究

金属迁移能导致混合微电路发生灾难性失效。本文介绍一种简单易行的测试方法－水滴试验法，来测量厚膜电路的实际金属迁移率。用引方法测量时，发现Ｐｄ－Ａｇ导体的迁移率最大，Ｐｔ－Ａｕ导体的金属迁移率最小。     

网络管理体系间迁移方法的探讨

本文提出了在异质型互连网络环境下为实现统一的网络管理可能出现的管理信息共享问题。为此，作者深入探讨，分析了目前国外为实现这种管理信息共享所采用的几种迁移方法；协议迁移，接口迁移和ＭＩＢ迁移。     

Gasification reactivity of charcoal with CO2. Part I: Conversion and structural phenomena

The gasification reaction of fir charcoal with CO₂ was studied by isothermal thermogravimetric analysis under kinetic control. The derived reaction rate (r=dX/dt) as a function of the converted carbon mass (X) was compared with random pore model predictions and found to be much higher at elevated conversion levels than predicted by theory. Similar enhanced reaction rate behaviour was evidenced after removing the natural alkali catalyst from the charcoal by acid washing, suggesting that with untreated charcoal the late reaction rate contribution stems from both, catalytic and additional structure effects. Literature attributes the unpredicted late reaction rate behaviour to the disintegration of the porous char particle into small fragments, which, in line with percolation theory predictions, seems to occur only after a critical conversion level has been reached. However, our gasification data reveal a gradual rise in the charcoal reactivity thereafter, suggesting a breaking up (embrittlement) of the solid phase accompanied by the exposure of fresh surface area from fracturing. The original random pore model derivation given by Bhatia and Perlmutter is extended to account also for these peculiarities and the resulting kinetic relation described our reaction rate data well over the entire conversion range.     

Using airborne laser scanning to monitor tree migration in the boreal-alpine transition zone

The boreal tree line is expected to advance upwards into the mountains and northwards into the tundra due to global warming. The major objective of this study was to find out if it is possible to use high-resolution airborne laser scanner data to detect very small trees — the pioneers that are pushing the tree line up into the mountains and out onto the tundra. The study was conducted in a sub-alpine/alpine environment in southeast Norway. A total of 342 small trees of Norway spruce, Scots pine, and downy birch with tree heights ranging from 0.11 to 5.20 m were precisely georeferenced and measured in field. Laser data were collected with a pulse density of 7.7 m^− 2. Three different terrain models were used to process the airborne laser point cloud in order to assess the effects of different pre-processing parameters on small tree detection. Greater than 91% of all trees > 1 m tall registered positive laser height values regardless of terrain model. For smaller trees (< 1 m), positive height values were found in 5-73% of the cases, depending on the terrain model considered. For this group of trees, the highest rate of trees with positive height values was found for spruce. The more smoothed the terrain model was, the larger the portion of the trees that had positive laser height values. The accuracy of tree height derived from the laser data indicated a systematic underestimation of true tree height by 0.40 to 1.01 m. The standard deviation for the differences between laser-derived and field-measured tree heights was 0.11-0.73 m. Commission errors, i.e., the detection of terrain objects — rocks, hummocks — as trees, increased significantly as terrain smoothing increased. Thus, if no classification of objects into classes like small trees and terrain objects is possible, many non-tree objects with a positive height value cannot be separated from those actually being trees. In a monitoring context, i.e., repeated measurements over time, we argue that most other objects like terrain structures, rocks, and hummocks will remain stable over time while the trees will change as they grow and new trees are established. Thus, this study indicates that, given a high laser pulse density and a certain density of newly established trees, it would be possible to detect a sufficient portion of newly established trees over a 10 years period to claim that tree migration is taking place.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.