Comparison of conventional and soft computing-based power control methods in mobile communications systems

 In this paper, we give a comparison between the conventional power control scheme and soft computing-based approaches in a mobile communications application. At the base station, the `bang–bang' control strategy and a neural network-based prediction control method are employed. In addition, full power command transmission mode, single-bit command transmission mode, and fuzzy logic-based power command enhancement unit are considered. Based on simulation experiments, we quantitatively evaluate the performance of various combinations of these control methods and command transmission modes. Conclusions on the optimal configuration are finally drawn.     

变压器绕组特性对局部放电检测的影响

提出了一种利用绕组两端测量结果对视在放电量进行修正的方法.     

A new analysis method for early detection and prevention of cascading events

This paper introduces a new analysis method for early detection and prevention of power system cascading events. It uses the vulnerability index (VI) and margin index (MI) to evaluate the vulnerability and security of the individual system parts, as well as the whole system during an operating state. It identifies the vulnerable parts of the power system using the topology processing and operation index methods. For a given disturbance, it calculates the power flow, evaluates the vulnerability and security, identifies the vulnerable part, finds the transmission line overload and bus voltage problems, and predicts the possible successive events. The approach defines the control means using the following methods for early detection and prevention of cascading events: network contribution factor (NCF), generator distribution factor (GDF), load distribution factor (LDF), and selected minimum load shedding (SMLS). This approach has been tested using the IEEE RTS-96 24-bus system and promising results have been obtained. The proposed approach allows the power system operator to detect initial stages of cascading events and assert actions that will prevent such events from unfolding.     

迭代学习控制用于StatCom阻尼区域间振荡的研究

ＳｔａｔＣｏｍ一般安装在长距离输电线路上,用于提高电力系统的稳定性,阻尼振荡,提高电压控制的精度及系统的传输能力。     

完整认识供电质量，全面提高服务质量

通过介绍欧共体欧洲能源管制者委员会的供电质量工作组报告的有关内容 ,对供电服务质量、供电连续性及电压质量提出了明确的要求 ,建立对供电质量的全面和完整的认识。     

元宝山电厂快控汽门的研究与实施

在分析和介绍元宝山电厂和辽西电网情况的基础上，着重介绍了对元宝山电厂３００ＭＷ机组实施快控汽门的研究、试验工作及主要的技术成果。该厂３００ＭＷ机组快控汽门方式的投入，提高了电网稳定性和经济效益。     

广东核电模拟机培训综述

本文通过大量的调查数据,概括了目前广东核电持照操纵员和高级操纵员的构成情况,如实地反映了模拟机培训的历史和现状,及良好实践.     

高铁移动通信的特殊性讨论

简要介绍了高铁通信遇到的特殊环境技术问题,如快速功控失效、无线信号包络莱斯分布、多普勒效应使基带信号频谱展宽、车厢窗户穿透损耗和入射角损耗加大、智能天线作用受限、小区硬切换信令开销增大等,并提出了适于高铁通信的无线覆盖方案。     

有源介观RLC电路的量子波函数及其双波描述

用表象变换的方法求得了介观RLC电路的量子波函数，并由此求得了电荷和电流的量子涨落，同时又用双波函数方法研究了有源介观电路的量子效应。通过两种方法的比较可知，电路的量子涨落与所处的状态密切相关，这一点由双波函数方法清楚可见。用双波函数求得的电荷和电流的系综平均值正是用波函数求得的电荷和电流的期望值。     

一种扫描图像几何畸变的数字校正方法

由于胶订书籍不能完全平铺于扫描仪的玻璃板上，从而使得扫描图像产生非线性几何畸变，为此，提出一种对此类畸变图像进行横向畸变数字校正的方法，并详细介绍了实现该数字校正的算法。实验结果表明，此算法能够大大减小横边误差，使畸变图像得到很好的复原。