偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

Manufacture of carbon fibers from polyacrylonitrile precursors treated with CoSO4

Free‐radical solution copolymerization of itaconic acid and acrylonitrile was carried out in DMSO using azodiisobutyronitrile as an initiator, changing the feed rate of itaconic acid. The resulting polymerization solution was spun to form polyacrylonitrile (PAN) precursors of carbon fibers. The precursors were treated with a CoSO₄ aqueous solution on‐line. The structure and properties of untreated and treated PAN precursors and the resultant carbon fibers were characterized by SEM and TEM, a stabilization process, etc. It is suggested that CoSO₄ acts as a catalyst in the formation of a ladder structure and reduces the temperature of cyclization, and the carbon fibers developed from treated PAN fibers showed improvement in the tensile strength and the Young's modulus. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 153–158, 2002     

IFP连续重整新一代催化剂再生技术的改进

介绍了我国引进的采用法国石油研究院 (IFP)三代催化剂连续再生技术的重整装置 ,分析了第二、第三代技术在原有基础上的改进 ,从再生气循环回路、再生操作参数和再生器内部结构三个方面重点介绍了第三代催化剂连续再生技术的特点和优势 :使催化剂的烧焦气循环回路与氧氯化用气、焙烧气循环回路彼此分开 ,烧焦、氧氯化、焙烧的操作参数可分别得到优化 ,使氧氯化及焙烧在高氧条件下进行 ,有利于催化剂金属的再分散 ,保持催化剂的活性。     

Acceptability of genetically modified cheese presented as real product alternative

European consumers, in general, have negative attitudes towards the use of gene technology in food production. The objective of this study was to examine whether taste and health benefits influence the acceptability of genetically modified (gm) products when they are presented as real product alternatives. Consumers in Denmark, Finland, Norway and Sweden (n=738) assessed two cheeses: one was labelled as genetically modified (preferred in an earlier product test) and the other as conventional (neutral in an earlier product test). A smaller control group received two cheeses with blind codes. Labelling decreased consumers' intentions to buy the originally preferred gm-labelled cheese, but still the intentions were at the same level with the conventionally labelled option. Participants chose two gm cheeses out of five possible when given the option to take cheese home after tasting. Intentions to buy gm cheese could best be explained by respondents' attitudes towards gene technology and perceived taste benefits. General health interest was also a reinforcer of intentions for gm cheese with reduced fat content.     

Telechelic polydimethylsiloxanes with terminal acetylenic groups prepared by phase-transfer catalysis

Telechelic, hydroxyalkyl terminated polydimethylsiloxanes were obtained under mild conditions via hydrosilylation of allyl alcohol or ethylene glycol monoallyl ether by oligomeric αω-hydride terminated polydimethylsiloxanes, with the use of a platinum catalyst. They were subsequently modified in a phase transfer catalyzed reaction by propargyl bromide, to give telechelic polysiloxanes terminated by acetylenic groups. The synthetic pathway is described and the characterization of the obtained products is presented.     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

纳米二氧化钛的表面修饰与应用的研究进展

介绍了纳米二氧化钛表面修饰的两种主要方法:无机和有机表面包覆,以及进行修饰后的纳米二氧化钛的应用.     

非线性编辑系统在新闻节目制作中使用的优与劣

随着数字技术和计算机技术的发展,非线性编辑系统已经越来越广泛地应用在电视节目制作中.阐述了非线性编辑系统在电视新闻节目(包括新闻专题节目、以新闻消息为主的日播节目等)制作中具有的优势和存在的劣势.     

聚丙烯表面改性及与涂料的粘结

讨论了聚丙烯制品喷涂着色的优点及影响聚丙烯制品与涂料之间粘结强度的各种因素。综述和评价了对聚丙烯进行表面改性的必要性及各种表面改性方法。     

酮亚胺对水性聚氨酯性能的改进

用丙酮分别和乙二胺、己二胺反应制备酮亚胺,并以其作为潜伏性扩链剂改善水性聚氨酯(PU)的性能。研究了酮亚胺以不同方式、加量对水性PU漆膜的厚度、硬度、耐水性、耐酸性、热稳定性和机械性能的影响。结果表明,采用丙酮缩乙二胺扩链的水性PU乳液的漆膜的耐水性优于用丙酮缩己二胺和用水扩链的PU乳液的漆膜,且加入过量的酮亚胺扩链效果较好,但其热稳定性并没有得到明显提高。