IC—V100电台锁相环频率合成器

本文从频率合成器的结构、功能入手,详细阐述了频率编程的原理及方法。     

丙烯酸高碳醇酯的合成

介绍了降凝剂中间体丙烯酸高碳醇酯的合成和产品分离提纯方法。考察了合成条件对酯化反应的影响，结果表明，在原料丙烯酸与十八醇摩尔比1．2：1，阻聚剂对苯二酚用量占原料总量1．5％，催化剂对甲苯磺酸用量占原料总量1．5％，反应温度80-86℃，回流反应时间6h条件下，酯化率最高达89％。产品分离提纯方法与传统分离方法比较，所需分离时间短，洗涤用水量少，而产品收率远高于传统分离方法，达95％以上。     

环氧乙烷合成乙二醇的研究进展

介绍了环氧乙烷合成乙二醇的主要生产方法，包括以壳牌、联碳化学公司以及Halcon—SD公司为代表的环氧乙烷直接水合法，环氧乙烷催化水合法和碳酸乙烯酯法，后两种乙二醇生产方法是目前国内外研究开发的热点。催化剂体系是催化水合法工艺的关键，重点介绍了国内外各主要公司对催化剂体系的研究进展及使用效果；碳酸乙烯酯法分为乙二醇和碳酸二甲酯联产法以及碳酸乙烯酯水解法，详细介绍了国内外各主要公司对该技术的研究进展，包括工艺流程、催化剂体系等方面。将3种乙二醇生产方法进行技术经济比较，结果表明，催化水合法和碳酸乙烯酯法在原料消耗和能耗方面占优势。并对我国乙二醇生产工艺技术提出建议。     

INCORPORATING PRACTICAL AND SYNTHESIS CONTENTS IN UNDERGRADUATE CONTROL EDUCATION

This paper revisits the effort over the last decade in making undergraduate control education more useful and attractive to both the control engineers and the engineers at large. With the help of further coverage in new textbooks, more practical and synthesis contents in the control courses have been incorporated. Gaps still exist, particularly in the areas of PID control and auto‐tuning, fuzzy control, overall control strategy, control structure and systems thinking, and these will be elaborated. A major challenge is in the coverage of more practical and synthesis contents in the introductory common control course for all engineers. How this may be resolved is discussed. Finally, the need for new teaching approaches such as the use of interesting case studies and the use of problem‐based learning will be outlined.     

Studies on the structural and ionic transport properties at elevated temperatures of La1−xMnO3±δ synthesized by a wet chemical method

Structural transformation and ionic transport properties are investigated on wet-chemically synthesized La_1−xMnO₃ (x=0.0–0.18) compositions. Powders annealed in oxygen/air at 1000–1080 K exhibit cubic symmetry and transform to rhombohedral on annealing at 1173–1573 K in air/oxygen. Annealing above 1773 K in air or in argon/helium at 1473 K stabilized distorted rhombohedral or orthorhombic symmetry. Structural transformations are confirmed from XRD and TEM studies. The total conductivity of sintered disks, measured by four-probe technique, ranges from 5 S cm⁻¹ at 298 K to 105 S cm⁻¹ at 1273 K. The ionic conductivity measured by blocking electrode technique ranges from 1.0×10⁻⁶ S cm⁻¹ at 700 K to 2.0×10⁻³ S cm⁻¹ at 1273 K. The ionic transference number of these compositions ranges from 3.0×10⁻⁵ to 5.0×10⁻⁵ at 1273 K. The activation energy deduced from experimental data for ionic conduction and ionic migration is 1.03–1.10 and 0.80–1.00 eV, respectively. The activation energy of formation, association and migration of vacancies ranges from 1.07 to 1.44 eV.     

Studies on the synthesis of SAPO-5

Silicoaluminophosphate (SAPO-5) molecular sieves have been synthesised from reaction mixtures having a molar composition of: 0.7–1.0 Al₂O₃:0.7–1.0 P₂O₅:0.01–2.0 SiO₂:xR:40 H₂O (where R = (C₂H₃)₃N or (C₂H₃)₄NOH and x = 1.5–2.5 for (C₂H₅)⁵N and 0.5 for (C₂H₅)₄NOH, at 473 K using various sources of alumina and silica. The effects of (i) varying the crystallinity of the alumina source (boehmite) and (ii) the use of different silica sources such as freshly prepared silica either from sodium silicate or paddy husk extract, silica gel from commercial water-glass, and tetraethyl orthosilicate have been studied. The crystallinity of boehmite has been found to have a strong effect on its reactivity towards the formation of SAPO-5. The activity of boehmite for SAPO-5 formation increased with a decrease in its crystallinity (or with increase in its moisture content). Any silica source devoid of sodium ions could be employed for the synthesis of SAPO-5. The process of crystallisation started as early as within 1.5 h of reaction and incorporation of silicon into the AlPO₄ framework has been noted at this stage. Formation of some tridymite phase as impurity has been observed under conditions such as (i) SiO₂ concentration > 1.7 mole and (ii) x > 2.0 when R = (C²H₅)₃N.     

DCPTA合成新方法的研究

ＤＣＰＴＡ是近年来新发现的一种植物生长调节剂。对农作物具有明显的增产增质效果。文中就其新的合成方法进行了研究。     

部件试验模态综合的简便方法

本文将一种基于完备模态基的模态综合技术应用于子结构的试验模态综合,获得成功。这种半试验半理论的模态综合方法是一种较为简便的、要求试验工作量较小的试验模态综合法,因为它只要求测量子结构的振动模态和频率即可。数值仿真结果表明,这种简便的试验模态综合法是行之有效的。     

反应器网络综合优化方法的研究进展

反应器网络综合优化方法在选择反应器类型和反应工艺条件时,比传统的方法表现出了很大的优势。综述了各类反应器网络综合优化方法的基本原理和研究进展,并分析了它们的优缺点。这些方法有基于过程特征的方法,包括可得区法和导数分析法;超结构优化法;目标类方法,包括目标法、构造目标法和构造MINLP法;以及经验推断法和分布参数法等。最后分析了这方面研究的发展趋势。     

有机介质中合成二硫化钛

本文研究了硫化氢与四氯化钛在某些有机介质中的反应，并提出了一个合成二硫化钛的新方法。该法是将干燥的硫化氢通入沸腾的四氯化铁的α－氯代萘溶液中，使硫化氢和四氯化钛发生复分解反应而生成二硫化钛。方法简便易行。Ｘ－射线物相鉴定及化学分析结果表明，产物为单一物相的、符合化学计量的二硫化钛。