基于FPGA的硬圆弧插补器设计

基于PC的数控系统成为开放式数控系统发展的必然趋势，其中PC加控制板卡的结构为实际的开放式标准体系。本文采用FPGA器件实现了扩展DDA圆弧插补算法，在满足较高精度的情况下，具有较快的插补速度，而且容易与电机的运动控制部分很好的信成，制作成控制板卡，从而适应目前基于PC加控制板卡的开放式数控系统的发展趋势。     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

相控阵雷达天线阵面记录回放系统

相控阵雷达广泛应用,其天线阵面对记录回放系统的数据速率要求提升。针对两种传统记录回放系统架构的不足,结合其优点,设计并实现了一种新型的基于FPGA的记录回放系统。该系统设计为板卡的形式,FPGA实现对硬盘的读写操作,采用自定义的文件系统对数据进行管理。经过测试,系统记录速度可以达到292 MB/s,回放速率为340 MB/s。实验结果表明,该记录回放系统性能稳定,通用性好,存储速率满足要求。     

水声传感阵列指向性与系统传输性能研究

针对浅海水声通信中水汽界面和海底的反射产生多途效应对信号传输的影响,依据水下声传输原理,分析了水声信道中的噪声特点和产生多途效应机理,研究水声信道中声传感器指向性与传输性能关系,探讨水声传感阵列方式在水下通信环境的优势,设计合理的阵元间连接形式、阵列驱动电路和阻抗匹配电路,保证有效的功率耦合效率。经水下试验测试表明:采用一定指向性的声阵列结构,利用单个阵元波束宽度小于10°,构成阵列结构的波束宽度小于30°,并进行一定阻抗匹配,可减小能量损失,有效提高水声通信系统性能。     

基于FPGA的高速数据存储系统优化设计

针对遥测系统数据记录装置中数据传输速率与存储速率不匹配的问题,提出Flash的并行存储方案,采用交替双平面的编程方式可以使得存储器的存储速率达到单片Flash最高存储速率的2倍,即60 MB/s;对控制单元FPGA内部双端口RAM的逻辑设计进行改进,解决了数据存储异常的现象。在数据回收方面,提出了多备份的设计思想和备用读数接口的设计方案,已在工程应用中得到成功实践,验证了该数据记录装置的可靠性。     

Kokkos: Enabling manycore performance portability through polymorphic memory access patterns

The manycore revolution can be characterized by increasing thread counts, decreasing memory per thread, and diversity of continually evolving manycore architectures. High performance computing (HPC) applications and libraries must exploit increasingly finer levels of parallelism within their codes to sustain scalability on these devices. A major obstacle to performance portability is the diverse and conflicting set of constraints on memory access patterns across devices. Contemporary portable programming models address manycore parallelism (e.g., OpenMP, OpenACC, OpenCL) but fail to address memory access patterns. The Kokkos C++ library enables applications and domain libraries to achieve performance portability on diverse manycore architectures by unifying abstractions for both fine-grain data parallelism and memory access patterns. In this paper we describe Kokkos’ abstractions, summarize its application programmer interface (API), present performance results for unit-test kernels and mini-applications, and outline an incremental strategy for migrating legacy C++ codes to Kokkos. The Kokkos library is under active research and development to incorporate capabilities from new generations of manycore architectures, and to address a growing list of applications and domain libraries.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

基于蜂群算法任意平面阵最大信干噪比研究

针对复杂战场环境下超短波电台天线接收低信噪比信号能力弱和易受定向干扰的缺陷,结合战场超短波电台不规则分布和位置不能任意改变的特点,提出任意结构天线阵信号接收模型,采用蜂群算法优化阵元相位使得天线阵输出信干噪比最大。假设信噪比为0 dB,干噪比为60 dB,且在平面内随机选取8个阵元,采用蜂群算法优化后输出信干噪比为8.633 dB。与改进差分进化算法、遗传算法和粒子群优化算法相比,分别提高了0.577 dB、1.124 dB和1.543 dB。研究成果可为超短波电台组阵通信提供参考。     

四电极电化学MEMS加速度传感器仿真

基于溶液相对于电极的运动会使电极附近因电势差作用而产生的离子浓度梯度发生改变,从而使电极电流发生变化等电化学原理,建立一种置于碘(I2)和碘化钾(KI)混合水溶液环境中的阳极—阴极—阴极—阳极(ACCA)四电极阵列传感单元模型。通过理论分析,该传感单元可以局部电解液为惯性质量,利用电解液中带电离子相对于电极的运动来产生并输出附加电流;进一步的建模仿真证明:在一定的加速度范围内(0a x0.149 m/s2),附加电流的大小同加速度呈正比关系,故可以将此电流放大输出,从而实现对加速度大小的表征。可利用MEMS工艺制作,并封装此传感单元成为加速度传感器。     

硅微阵列陀螺仪闭环驱动控制技术研究

为了进一步提高硅微阵列陀螺仪驱动模态的控制精度与稳定性,深入分析了硅微阵列陀螺仪的结构设计和闭环驱动控制技术。基于硅微阵列陀螺仪闭环驱动控制的特点,以现场可编程门阵列(FPGA)为核心控制平台,实现一种基于自激振荡原理的数字化闭环驱动电路。分析并建立了自激振荡与幅度控制的基本模型,基于Simulink实现了闭环自激驱动的仿真。实验结果表明,常温下驱动幅度控制精度达到9×10~(-5),并能有效跟踪驱动模态谐振频率。