基于FPGA的高速数据存储系统优化设计

针对遥测系统数据记录装置中数据传输速率与存储速率不匹配的问题,提出Flash的并行存储方案,采用交替双平面的编程方式可以使得存储器的存储速率达到单片Flash最高存储速率的2倍,即60 MB/s;对控制单元FPGA内部双端口RAM的逻辑设计进行改进,解决了数据存储异常的现象。在数据回收方面,提出了多备份的设计思想和备用读数接口的设计方案,已在工程应用中得到成功实践,验证了该数据记录装置的可靠性。     

Kokkos: Enabling manycore performance portability through polymorphic memory access patterns

The manycore revolution can be characterized by increasing thread counts, decreasing memory per thread, and diversity of continually evolving manycore architectures. High performance computing (HPC) applications and libraries must exploit increasingly finer levels of parallelism within their codes to sustain scalability on these devices. A major obstacle to performance portability is the diverse and conflicting set of constraints on memory access patterns across devices. Contemporary portable programming models address manycore parallelism (e.g., OpenMP, OpenACC, OpenCL) but fail to address memory access patterns. The Kokkos C++ library enables applications and domain libraries to achieve performance portability on diverse manycore architectures by unifying abstractions for both fine-grain data parallelism and memory access patterns. In this paper we describe Kokkos’ abstractions, summarize its application programmer interface (API), present performance results for unit-test kernels and mini-applications, and outline an incremental strategy for migrating legacy C++ codes to Kokkos. The Kokkos library is under active research and development to incorporate capabilities from new generations of manycore architectures, and to address a growing list of applications and domain libraries.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

基于蜂群算法任意平面阵最大信干噪比研究

针对复杂战场环境下超短波电台天线接收低信噪比信号能力弱和易受定向干扰的缺陷,结合战场超短波电台不规则分布和位置不能任意改变的特点,提出任意结构天线阵信号接收模型,采用蜂群算法优化阵元相位使得天线阵输出信干噪比最大。假设信噪比为0 dB,干噪比为60 dB,且在平面内随机选取8个阵元,采用蜂群算法优化后输出信干噪比为8.633 dB。与改进差分进化算法、遗传算法和粒子群优化算法相比,分别提高了0.577 dB、1.124 dB和1.543 dB。研究成果可为超短波电台组阵通信提供参考。     

四电极电化学MEMS加速度传感器仿真

基于溶液相对于电极的运动会使电极附近因电势差作用而产生的离子浓度梯度发生改变,从而使电极电流发生变化等电化学原理,建立一种置于碘(I2)和碘化钾(KI)混合水溶液环境中的阳极—阴极—阴极—阳极(ACCA)四电极阵列传感单元模型。通过理论分析,该传感单元可以局部电解液为惯性质量,利用电解液中带电离子相对于电极的运动来产生并输出附加电流;进一步的建模仿真证明:在一定的加速度范围内(0a x0.149 m/s2),附加电流的大小同加速度呈正比关系,故可以将此电流放大输出,从而实现对加速度大小的表征。可利用MEMS工艺制作,并封装此传感单元成为加速度传感器。     

硅微阵列陀螺仪闭环驱动控制技术研究

为了进一步提高硅微阵列陀螺仪驱动模态的控制精度与稳定性,深入分析了硅微阵列陀螺仪的结构设计和闭环驱动控制技术。基于硅微阵列陀螺仪闭环驱动控制的特点,以现场可编程门阵列(FPGA)为核心控制平台,实现一种基于自激振荡原理的数字化闭环驱动电路。分析并建立了自激振荡与幅度控制的基本模型,基于Simulink实现了闭环自激驱动的仿真。实验结果表明,常温下驱动幅度控制精度达到9×10~(-5),并能有效跟踪驱动模态谐振频率。     

平面式电容传感器阵列测量复合材料技术研究

基于复合材料及其内部不同损伤具有不同介电特性,采用平面式电容传感器阵列实现可视化无损检测。论述了系统的构成和测量原理,分析了影响测量效果的因素,并设计了信号转换和采集处理电路。基于简单的激励测量模式和共轭梯度算法,对比分析了仿真与实验结果。实验结果验证了基于电容敏感机理的平面式电容传感器阵列对复合材料内部缺陷检测的可行性和有效性。     

阵列式多针-柱电极装置实现离子风的实验与分析

为了实现一定气体流速的离子风,设计了一种新型的阵列式三排3 ×3垂直放置的针-柱电极结构放电装置.在针-柱之间间距为3mm、排与排之间间距为8 mm、镇流电阻12 MΩ、放电电阻12 MΩ、测试电阻1 kΩ、大气压环境、室温、无外部通入气流时,阵列式针-柱电极实现了稳定的电晕放电,并通过示波器记录的放电波形、数码相机拍摄的发光图像以及放电伏安特性曲线进行了验证.同时,随着阵列式排数的增加,放电电流变大,离子风风速也随之增大.该针-柱结构易于用MEMS工艺加工制作,可应用于便携式分析仪器中.     

机载前视风切变检测气象雷达的研究进展

机载气象雷达是商业飞机强制安装的机载电子设备,可以称得上是“双眼 ”,它对于保障飞行安全具有举足轻重的作用。目前,机载气象雷达关键技术尚掌握在国外 生 产厂商手中。本文从机载气象雷达系统和机载气象雷达涉及的信号处理技术（包括降水目标 检测、湍流检测和低空风切变检测、地杂波抑制等）两个方面论述了机载气象雷达的发展历 程,指出了其中的关键技术和尚待解决的问题。最后,本文针对下一代具有增强型检测能力的 机载气象雷达系统及其相关技术进行了评述。     

基于射频隐身的相控阵雷达搜索控制参量优化设计

机载雷达射频隐身技术对提高飞行器生存能力具有重要意义。 本文研究了机载相控阵雷达基于射频隐身的搜索控制参量优化设计。通过分析截获概率原理 ,给出了目标特征和雷达系统性能对驻留时间和波位间隔等搜索控制参量的影响关系,构建 了目标探测性能与隐身性能约束下的优化模型。仿真获得了满足隐身要求下相控阵雷达的最 优搜索控制参数。