Using airborne laser scanning to monitor tree migration in the boreal-alpine transition zone

The boreal tree line is expected to advance upwards into the mountains and northwards into the tundra due to global warming. The major objective of this study was to find out if it is possible to use high-resolution airborne laser scanner data to detect very small trees — the pioneers that are pushing the tree line up into the mountains and out onto the tundra. The study was conducted in a sub-alpine/alpine environment in southeast Norway. A total of 342 small trees of Norway spruce, Scots pine, and downy birch with tree heights ranging from 0.11 to 5.20 m were precisely georeferenced and measured in field. Laser data were collected with a pulse density of 7.7 m^− 2. Three different terrain models were used to process the airborne laser point cloud in order to assess the effects of different pre-processing parameters on small tree detection. Greater than 91% of all trees > 1 m tall registered positive laser height values regardless of terrain model. For smaller trees (< 1 m), positive height values were found in 5-73% of the cases, depending on the terrain model considered. For this group of trees, the highest rate of trees with positive height values was found for spruce. The more smoothed the terrain model was, the larger the portion of the trees that had positive laser height values. The accuracy of tree height derived from the laser data indicated a systematic underestimation of true tree height by 0.40 to 1.01 m. The standard deviation for the differences between laser-derived and field-measured tree heights was 0.11-0.73 m. Commission errors, i.e., the detection of terrain objects — rocks, hummocks — as trees, increased significantly as terrain smoothing increased. Thus, if no classification of objects into classes like small trees and terrain objects is possible, many non-tree objects with a positive height value cannot be separated from those actually being trees. In a monitoring context, i.e., repeated measurements over time, we argue that most other objects like terrain structures, rocks, and hummocks will remain stable over time while the trees will change as they grow and new trees are established. Thus, this study indicates that, given a high laser pulse density and a certain density of newly established trees, it would be possible to detect a sufficient portion of newly established trees over a 10 years period to claim that tree migration is taking place.     

基于Windows CE的线路巡检系统

首先讨论了现有线路巡检模式的不足，然后提出了利用windows CE来构建线路巡检系统。分析了该系统的硬件平台之后，提出了线路巡检系统的体系结构，阐述了该系统应具有的软件功能。在实际应用中表明，该系统在线路巡检中有较强的推广价值。     

用最小二乘法恢复逐行倒相副载波

介绍ＰＡＬ制彩色全电视信号中色同步信号编码原理及恢复逐行倒相副载波的过程中，两种计算色同步信号相位角的方法。并且在实验的基础上得出：最小二乘法在ＰＡＬ制电视信号的副载波相位角计算中不仅可以满足精度要求，而且简便灵活。     

声表面波脉冲编码调制振荡器

论述了一种直接式声表面波脉冲编码调制振荡器的工作原理及设计方法。实际制作了工作频率为３９４ＭＨｚ、调制频偏大于２００ｋＨｚ、调制信号码速率大于４００ｋｂｉｔ／ｓ、输出功率大于５０ｍＷ、温度稳定性优于±５０×１０－６（－２０°Ｃ～＋６０°Ｃ）的性能优良的声表面波脉冲编码调制振荡器     

声表面波可程序抽头延迟线研究

报道声表面波可程序抽头延迟线的研制情况。对该器件的总体结构，电路原理框图、声表面波可程序抽头延迟线结构作了一个扼要的概念。同时分别报道了我所研制的各类声表面波可程序抽头延迟线器件性能指标及相应的图片说明，最后对该器件仍存在的一些问题作了探讨。     

Models and observations of fcc/bcc interfaces

Whereas models of the structure and periodicity of CSL or near CSL high angle grain boundaries are relatively well developed and have been to some extent verified by experiment, the nature of more general (e.g. fcc/bcc) interfaces is very imperfectly understood. One of the major differences between homo- and heterophase boundaries is the occurrence, in the latter case, of reproducible orientation relationships due to the crystallographic requirements of phase transformation (e.g. a glissile interface for martensitic growth, low energy interfaces for classical nucleation). A review is given of the relationships commonly observed to obtain between fcc and bcc crystals (as well as ordered phases based upon these structures). Within a given relationship, it is possible to use models of the available interfaces to predict their dislocation content; the success of the various approaches is considered. It is shown that the dislocation arrays identified on fcc/bcc boundaries are consistent with the occurrence of a primary structural relaxation, but that the latter does not appear to be complete. Possible reasons for this are discussed, together with the extent to which secondary structural models may be applicable. Attempts to rationalize the observed orientation relationships and morphologies are discussed, and it is pointed out that these all rely on searches for situations of minimum primary misfit, but that the way in which the latter is quantified determines the results of the analyses. Nevertheless, the implication is that the primary misfit does appear to determine the actual behaviour, though no structural or mechanistic conclusions can safely be drawn from this observation.     

A sequencing problem for a mixed-model assembly line in a JIT production system

In an assembly line of a just-in-time (JIT) production system, workers have the power and the responsibility to stop the line when they fail to complete their operations within their work zones. This paper deals with a sequencing problem for the mixed-model assembly conveyor line in the JIT production system. In some environment, the most important criterion is the line stoppage rather than the variation of production rates. The problem is to find an optimal sequence of units that minimizes the total line stoppage time. Lower and upper bounds of the total line stoppage time are derived and the branch-and-bound method is applied to the problem. A numerical example is given.     

一个用于VHSIC连接线瞬态分析的电路模拟器

本文介绍了一个可对含连接线的电路进行瞬态分析的电路模拟器,该模拟器是在SPICE基础上经修改扩充而成的,连接线的处理采用了文献[1]的方法.文中介绍了方法的基本原理,讨论了数值Laplace反变换时参数的选择与误差的控制.实际VHSIC电路的试算结果表明,该模拟器是相当有效的.     

最佳相位设计的MBE声码器语音合成

提出了一种基于最佳相位设计的语音合成技术,能够有效降低MBE声码器合成语音信号由于波形失衡而导致的饱和失真的概率.此外,为了保证合成滤波器的稳定性,对线谱频率(LSF)系数提取进行了优化.实验结果显示,合成语音信号波形近似平衡地分布在零幅度值的上下,语音听起来没有不舒服的感觉.实验结果表明,基于最佳相位设计的语音合成技术能够有效改善合成语音质量.     

制丝线加香加料系统的问题及改进方法

针对目前卷烟企业制丝线加香、加料系统普遍存在的问题,从设备选型、控制算法进行分析,提出改进方法。