Accurate higher-order analytical approximate solutions to nonconservative nonlinear oscillators and application to van der Pol damped oscillators

In general, this paper deals with general nonlinear oscillations of a nonconservative and single degree-of-freedom system with odd nonlinearity and, in particular, it presents accurate higher-order analytical approximate solutions to van der Pol damped nonlinear oscillators having odd nonlinearity and the Rayleigh equation. By combining the linearization of the governing equation with harmonic balancing and the method of averaging, we establish accurate analytical approximate solutions for the general weakly damped nonlinear systems. Unlike the classical harmonic balance method, simple linear algebraic equations instead of nonlinear algebraic equations are obtained upon linearization prior to harmonic balancing. The combination of these two methods results in very accurate transient response of the periodic solution. In addition and for the first time, this paper also presents a method for deducing fourth-, fifth- and higher-order linearized governing equations from the lower-order equations without the requirement of formulating the problem from the first principle. Three examples including the van der Pol damped nonlinear oscillator are presented to illustrate the excellent agreement with approximate solution using the exact frequency.     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

Restricted overlapping balancing domain decomposition methods and restricted coarse problems for the Helmholtz problem

Overlapping balancing domain decomposition methods and their combination with restricted additive Schwarz methods are proposed for the Helmholtz equation. These new methods also extend previous work on non-overlapping balancing domain decomposition methods toward simplifying their coarse problems and local solvers. They also extend restricted Schwarz methods, originally designed to overlapping domain decomposition and Dirichlet local solvers, to the case of non-overlapping domain decomposition and/or Neumann and Sommerfeld local solvers. Finally, we introduce coarse spaces based on partitions of unity and planes waves, and show how oblique projection coarse problems can be designed from restricted additive Schwarz methods. Numerical tests are presented.     

A new efficient numerical method and the dynamic analysis of composite laminates with piezoelectric layers

Firstly, a numerical method for the inversion of Laplace transform is developed and its accuracy is shown through examples. Then, a state-vector equation for the dynamic problems of piezoelectric plates is deduced directly from a modified mixed variational principle for piezoelectric bodies and its exact solution for the dynamic problems of simply supported rectangle piezoelectric plate is simply given. For multilayered hybrid plates, we derive the solution in terms of the propagator matrices. The techniques accounts for the compatibility of generalized displacements and generalized stresses on the interface both the elastic layers and piezoelectric layers, and the transverse shear deformation and the rotary inertia of laminate are also considered in the global algebraic equation of structure. Meanwhile, there is no restriction on the thickness and the number of layers. As an application of the numerical inversion of Laplace transform presented in this paper, typical numerical examples of the harmonic vibration and transient response are proposed and discussed. Since the highly accurate numerical results, they can serve as benchmarks to test various thick plate theories and various numerical methods, such as the finite and boundary element methods for transient response problems.     

FEM model of the ohmic resistance of IP-SOFCs

In the present work, the ohmic resistance of an integrated planar-SOFC (IP-SOFC) has been evaluated by developing a model whose equations have been solved numerically through an FEM method. The model allows to estimate the distribution of voltage and current density in the cell. A comparison between simulated and experimental data of area specific resistance is reported, which shows satisfactory agreement. The mathematical model has also been used to carry out some parametric studies for optimisation purposes. Indeed, a reduction in cell pitch length and an increase in electrode thickness are predicted to lead to a reduction in ohmic losses in IP-SOFCs.     

Time-dependent modelling and asymptotic analysis of electrochemical cells

A (time-dependent) model for an electrochemical cell, comprising a dilute binary electrolytic solution between two flat electrodes, is formulated. The method of matched asymptotic expansions (taking the ratio of the Debye length to the cell width as the small asymptotic parameter) is used to derive simplified models of the cell in two distinguished limits and to systematically derive the Butler–Volmer boundary conditions. The first limit corresponds to a diffusion-limited reaction and the second to a capacitance-limited reaction. Additionally, for sufficiently small current flow/large diffusion, a simplified (lumped-parameter) model is derived which describes the long-time behaviour of the cell as the electrolyte is depleted. The limitations of the dilute model are identified, namely that for sufficiently large half-electrode potentials it predicts unfeasibly large concentrations of the ion species in the immediate vicinity of the electrodes. This motivates the formulation of a second model, for a concentrated electrolyte. Matched asymptotic analyses of this new model are conducted, in distinguished limits corresponding to a diffusion-limited reaction and a capacitance-limited reaction. These lead to simplified models in both of which a system of PDEs, in the outer region (the bulk of the electrolyte), matches to systems of ODEs, in inner regions about the electrodes. Example (steady-state) numerical solutions of the inner equations are presented.     

Mathematical models of the VEGF receptor and its role in cancer therapy

We present an analysis of a stochastic model of the vascular endothelial growth factor (VEGF) receptor. This analysis addresses the contribution of ligand-binding-induced oligomerization, activation of src-homology 2 domain-carrying kinases and receptor internalization in the overall behaviour of the VEGF/VEGF receptor (VEGFR) system. The analysis is based upon a generalization of a Wentzel-Kramers-Brillouin (WKB) approximation of the solution of the corresponding master equation. We predict that tumour-mediated overexpression of VEGFRs in the endothelial cells (ECs) of tumour-engulfed vessels leads to an increased sensitivity of the ECs to low concentrations of VEGF, thus endowing the tumour with increased resistance to anti-angiogenic treatment.     

Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods

This article presents the first application of the Finite Calculus (FIC) in a Ritz-FEM variational framework. FIC provides a steplength parametrization of mesh dimensions, which is used to modify the shape functions. This approach is applied to the FEM discretization of the steady-state, one-dimensional, diffusion–absorption and Helmholtz equations. Parametrized linear shape functions are directly inserted into a FIC functional. The resulting Ritz-FIC equations are symmetric and carry a element-level free parameter coming from the function modification process. Both constant- and variable-coefficient cases are studied. It is shown that the parameter can be used to produce nodally exact solutions for the constant coefficient case. The optimal value is found by matching the finite-order modified differential equation (FOMoDE) of the Ritz-FIC equations with the original field equation. The inclusion of the Ritz-FIC models in the context of templates is examined. This inclusion shows that there is an infinite number of nodally exact models for the constant coefficient case. The ingredients of these methods (FIC, Ritz, MoDE and templates) can be extended to multiple dimensions     

企业材料耗用的统计分析与评价

本文利用回归分析导出材料耗用的回归方程 ,并对方程进行拟合优度检测和显著性检验 ,以及对材料耗用情况进行综合评价。     

Ergodicity of filtering process by vanishing discount approach

A new approach to study ergodicity of filtering processes is presented. It is based on the vanishing discount approach to discounted functional of filtering process. We show that limit superior of the Cesaro averages of the functionals is the same for all initial conditions from which the uniqueness of invariant measures of filtering processes follows. The approach is based on certain assumption for which we provide a sufficient condition using concavity arguments. In addition we show the existence of solutions to the Poisson equation corresponding to filtering process with concave functional. The assumptions are then extended to the controlled case and using similar concave arguments we obtain the existence of solutions to the Bellman equation corresponding to partially observed average cost per unit time problem.