一类不确定采样系统的鲁棒D控制研究

本文对一类范数有界不确定线性采样系统,提出了存在状态反馈控制律,使得闭环系统的所有极点均位于一给定的圆盘中且具有最优鲁棒H∞性能的一个充分条件。结合控制律反馈增益参数极小化的要求,建立一个具有线性矩阵不等式约束的凸优化问题,通过该问题的解决,可以构造一个具有较小反馈增益参数和给定要求的控制律,算例结果进一步表明,该控制器具有更好的扰动抑制性能。     

新型增益调度变结构控制器的性能比较研究

为了提高变结构控制系统的控制效率,从节省控制能耗、消除颤振、快速进入滑动模态、获取稳定滑动模态等基本要求出发,将变结构控制器设计成具有增益调度控制器参数的增益调度变结构控制器,并提出了增益调度变结构控制器的设计方法.通过选择不同的调度变量、调度变量函数以及调度变量的变化范围,给出6种不同的增益调度变结构控制器,并进行了仿真研究,以比较其控制性能.     

基于神经网络干扰观测器的一类不确定非线性MIMO系统H_∞跟踪控制

针对一类具有未知外部干扰及内部不确定性的非线性MIMO系统,提出了基于神经网络干扰观测器的鲁棒跟踪控制方法,用于降低控制器对干扰的要求.设计了基于神经网络的干扰观测器,以逼近由外部干扰、内部不确定性和子系统的交叉耦合组成的复合干扰.根据Lyapunov稳定性理论的参数更新律及所设计的控制器,保证了系统中所有信号的最终一致有界性,并获得了给定的跟踪性能指标.仿真结果证明了该方法的有效性.     

GUI在含典型非线性系统分析中的应用

非线性系统的分析远比线性系统为复杂,缺乏能统一处理的有效数学工具。在许多工程应用中,由于难以求解出系统的精确输出过程。应用Matlab的GUI开发的典型非线性对系统性能分析仿真软件所设计的程序具有良好的用户界面。用此软件可使典型非线性对系统性能的仿真分析变得非常快捷、方便,是工程分析和教学中的一个有效的辅助工具。     

Controller design for flexible structure vibration suppression with robustness to contacts

Model-based feedback control of vibration in flexible structures can be complicated by the possibility that interaction with an external body occurs. If not accounted for, instability or poor performance may result. In this paper, a method is proposed for achieving robust vibration control of flexible structures under contact. The method uses robust linear state feedback, coupled with a state estimation scheme utilizing contact force measurement. Uncertain contact characteristics are modelled by a sector-bounded non-linear function, such that state feedback gains can be synthesized using a matrix inequality formulation of the Popov stability criterion. A separation theorem is used to establish a robust H₂ cost bound for the closed loop system. Experimental results from a multi-mode flexible structure testbed confirm that vibration attenuation and stability can be maintained over a broad range of contact characteristics, in terms of compliance and clearance.     

Global robust output regulation of lower triangular systems with unknown control direction

This paper presents the solvability conditions for the global robust output regulation problem for lower triangular nonlinear systems assuming the control direction is unknown. The approach used is an integration of the robust stabilization technique and Nussbaum gain technique.     

电-热-氢综合能源系统鲁棒区间优化调度

该文采用鲁棒区间法挖掘电-热综合能源系统协调运行的潜力,以缓解风电功率的不确定性对电力系统的运行稳定性的影响,并构建风力发电与氢储能系统相结合的风-氢混合系统,考虑氢储能系统的热平衡需求,以充分发挥氢储能系统的储能效率,平抑风电的波动性。首先,介绍了考虑氢储能系统接入的电-热综合能源系统结构,并构建其数学模型;然后,以区间形式考虑风电的不确定性,构建含风电的鲁棒区间优化调度模型,使系统在所有风电出力允许区间内,均满足允许约束条件;再次,建立一种含风-氢混合系统的电-热综合能源系统鲁棒区间优化调度模型,采用对偶理论将原模型转化为单层模型进行求解,最坏情况下的风电不平衡功率由可调机组根据时变参与因子进行调整;最后,以PJM-5节点电力系统与6节点热力系统和辽宁省北部太和综合能源系统为例对所提模型进行分析,验证了模型的有效性。     

Finite-time optimal tracking control for a class of nonlinear systems with prescribed performance

In this paper, a finite-time optimal tracking control scheme based on integral reinforcement learning is developed for partially unknown nonlinear systems. In order to realize the prescribed performance, the original system is transformed into an equivalent unconstrained system so as to a composite system is constructed. Subsequently, a modified nonlinear quadratic performance function containing the auxiliary tracking error is designed. Furthermore, the technique of experience replay is used to update the critic neural network, which eliminates the persistent of excitation condition in traditional optimal methods. By combining the prescribed performance control with the finite-time optimization control technique, the tracking error is driven to a desired performance in finite time. Consequently, it has been shown that all signals in the partially unknown nonlinear system are semiglobally practical finite-time stable by stability analysis. Finally, the provided comparative simulation results verify the effectiveness of the developed control scheme.     

Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions

Developing light weight polymer based composites dispersed with novel reinforcements which can function well in the presence of aggressive environments is an active research field in the materials engineering. Hence, in the current work, halloysite nanotubes (1 %, 2 %, 4 %, 6 %, 8 % and 10 % by weight) were reinforced into acrylonitrile butadiene styrene/polycarbonate blend and the role of reinforcing phases on the mechanical performance under aggressive environmental conditions has been evaluated. Hardness was measured as gradually increased in the composites with the increased content of the reinforcements. Impact strength of the composites was observed as increased in the composites up to 4 % reinforcement and further decreased. Increased strength was measured for the composite up to 2 % reinforcement. Ductility of the composites was decreased as reflected form the decreased % of elongation with the higher fraction of reinforcements due to induced brittleness. The composites were exposed to diluted sulfuric acid for 3 h and 6 h at 60 °C and then subjected to tensile loading. With the increased time of exposure, composites with 1 % and 2 % reinforcement exhibited relatively better performance.     

基于SSH架构的高职院校成绩管理系统的分析和设计

本文介绍了当前基于Struts2、Spring、Hibernate框架的高职院校成绩管理系统的分析和设计。