Unique clay orientation in the injection-molded bar of isotactic polypropylene/clay nanocomposite

In this article, the injection-molded bars of isotactic polypropylene/organoclay nanocomposite with different clay contents have been obtained via dynamic packing injection molding (DPIM). The oriented microstructure including layered nanoparticles and PP lamellae has been inspected through 2D-WAXS analyses along the sample thickness of the molded bars. Depending on the clay content and sample thickness, various oriented clay structures with nanoparticles uniplanar-axially oriented parallel to the surface of molded bar, or partially tumbled around the flow axis of the molded bar, or even a random orientation, could be observed. The observed orientation behavior of nanoparticles could be temporarily elucidated as the results of the sensitive response of layered nanoparticles to shear deformation and the structural recovery of clay network assisted by the electrostatic attraction existing between adjacent nanoplatelets.     

Improving oxygen barrier properties of poly(ethylene terephthalate) by incorporating isophthalate. I. Effect of orientation

The present study examined poly(ethylene terephthalate) (PET) and a series of statistical and blocky copolymers in which up to 30% of the terephthalate was replaced with isophthalate by copolymerization and melt blending, respectively. Some level of transesterification during processing of melt blends resulted in blocky copolymers, as confirmed by NMR. Random and blocky copolymers exhibited similar properties in the glassy state, including a single glass transition, due to miscibility of the blocks. However, random copolymerization effectively retarded cold‐crystallization from the glass whereas blocky copolymers readily cold‐crystallized to a crystallinity level close to that of PET. The polymers were oriented at four temperatures in the vicinity of the T_g and characterized by oxygen transport, wide‐angle X‐ray diffraction, positron annihilation lifetime spectroscopy, and infrared spectroscopy. Orientation of all the copolymers resulted in property changes consistent with strain‐induced crystallization. However, blocky copolymers oriented more easily than random copolymers of the same composition and after orientation exhibited slightly lower oxygen permeability, higher density, and higher fraction trans conformers. Analysis of oxygen solubility based on free volume concepts led to a two‐phase model from which the amount of crystallinity and the amorphous phase density were extracted. Dedensification of the amorphous phase correlated with the draw temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1615–1628, 2005     

Orientation and relaxation in uniaxially-stretched poly(2,6-dimethyl 1,4-phenylene oxide) — atactic polystyrene blends

Infra-red measurements of the dichroic ratio of atactic polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide) absorption bands provide a valuable method for the determination of orientation as well as relaxation of chains of both polymers during stretching of their compatible blends. Influence of strain rate, temperature of stretching, and molecular weight of the polymers on orientation of both polymer chains in blends containing up to 35% PPO has been studied. Orientation relaxation for both polymers has been analysed using Lodge's constitutive equation. Master curves have been obtained for PPO and PS in the blends at a reference temperature T₀ = T_g + 10°C. Results are interpreted in terms of an hindrance of relaxation of PS chains induced by interaction with a highly-oriented PPO network which slowly relaxes.     

Modeling the large‐strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions

The tensile behavior of polycarbonate was studied at large strains below the glass‐transition temperature. Experiments were carried out at a series of constant temperatures and also under conditions of falling temperatures. The specimens necked with a natural draw ratio of approximately 2, and the study was mainly focused on the necked material. Isothermal experiments revealed an elastic mechanism that initiated beyond the natural draw ratio. A model consisting of an Eyring process and two Gaussian elastic mechanisms was found to be applicable to both the isothermal and anisothermal stress‐relaxation and stress–strain results. The same model also produced reasonable estimates of the stresses generated during the necking process. In addition, a simple relationship between the isothermal and anisothermal stress relaxation was demonstrated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2105–2116, 2005     

等通道转角挤出制备自增强等规聚丙烯的结构与性能研究

采用等通道转角挤出方法对等规聚丙烯进行自增强挤出,研究和分析挤出工艺条件与材料结构、性能之间的关系。利用广角X-射线衍射、差示扫描量热分析等手段对材料结构进行表征。结果表明:经过等通道转角挤出后等规聚丙烯的结晶度提高、晶粒细化、熔点提高,形成明显的取向结构,经过3次等通道转角挤出,等规聚丙烯的拉伸强度由挤出前的17.13MPa提高到59.38MPa。     

Anisotropic network formation by the photopolymerization of new monomers derived from 4‐hydroxybenzenethiol

New polymerizable difunctional liquid crystals of monomers derived from 4‐hydroxybenzenethiol were synthesized, characterized, and photopolymerized by the formation of anisotropic films. These films were obtained by the irradiation of the monomers in the mesophase with UV light before they were macroscopically oriented in glasses treated on the surface with polyimide and uniaxially rubbed. The monomers showed smectic and nematic mesophases. The thin films, uniaxially oriented, were optically transparent. The orientation was verified by IR dichroism, which showed a preferential order of mesogens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1812–1817, 2005     

MoNoC: A monitored network on chip with path adaptation mechanism

Complex systems on chip containing dozens of processing resources with critical communication requirements usually rely on the use of networks on chip (NoCs) as communication infrastructure. NoCs provide significant advantages over simpler infrastructures such as shared busses or point to point communication, including higher scalability, more efficient energy management, higher bandwidth and lower average latency. Applications running on NoCs with more than 10% of bandwidth usage attest that the most significant portion of message latencies refers to buffered packets waiting to enter the NoC, whereas the latency portion that depends on the packet traversing the NoC is sometimes negligible. This work presents an adaptive routing architecture, named Monitored NoC (MoNoC), which is based on a traffic monitoring mechanism and the exchange of high priority control packets. This method enables to adapt paths by choosing less congested routes. Practical experiments show that the proposed path adaptation is a fast process, enabling to transmit packets with smaller latencies, up to 9 times smaller, by using non-congested NoC regions.     

Context-aware adaptive IP mobility anchoring

The novel distributed mobility management trend is a promising direction to cope with the increasing mobile data traffic and flatten network architectures. Most of the novel mobility approaches distribute the mobility anchors through the access level, as opposed to the centralized mobility anchoring model. Other recent approaches argue that mobility anchors closer to the content servers may be the solution to optimize the mobility performance. However, none of the mobility anchoring models is ideal for all scenarios, since it depends on the user, the session and the network. Hence, we propose an IP mobility approach driven by the context of the user, sessions and the network, where the mobility anchors for IP address allocation and for routing/forwarding are distributed through the network nodes, while the mobility context is managed by the mobile devices. Although each session is properly anchored in the establishment phase, the routing/forwarding is adapted over time, according to the user, the session and the network context: the proposed approach is able to signal different mobility anchors to optimize the routing path to new and ongoing sessions of the user. The outcome of the evaluation shows that the proposed approach overall reduces the data cost, the data delay, the tunneled packets and the tunnel length, when compared with other anchoring models.     

一种低功耗的社区机会网络消息路由算法

社区机会网络中节点的移动具有一定的相关性且不同的节点往往具有不同的移动特点,当前机会网络中主流的多拷贝路由算法并未充分考虑到这些特点,将该算法直接应用于这类网络会导致资源消耗较高、传输成功率低等问题。针对这些问题,提出一种基于社区的低功耗消息路由算法,其能自适应地控制消息拷贝数量,并根据节点与目标社区节点和本地社区节点相遇的历史信息来设置其目标社区和本地社区的活跃度,依靠活跃度较高的节点来完成消息传输。仿真结果表明,在延迟要求比较宽松的社区机会网络中,该算法在消息传输的成功率及占能耗最主要部分的消息转发次数方面明显优于Spray and Focus算法。     

基于频域的运动模糊参数估计

运动模糊图像复原的关键之一是模糊核函数的估计,即降质图像的模糊方向和距离变化的估计。已经有多种方法用于模糊核函数的估计,通过对运动模糊图像频谱的研究,提出了一种基于形态学的模糊运动方向计算方法,并根据模糊图像频谱的黑色条纹周期出现的规律,采用投影法计算极值点,从而获取模糊运动距离。实验结果表明该算法简单有效,得到的运动模糊参数较准确。