Measurement and Correlation for Solubility of (S)-(+)-2,2-Dimethyl-cyclopropane Carbox Amide in Different Solvents

1 INTRODUCTION (S)-(+)-2,2-dimethylcyclopropane carbox amide [(+)-DMCPCA, Fig.1] is a key intermediate of Cilas- tatin, an inhibitor of dehydropeptidase-I. As the syner- gist of imipenem (an antibiotic drug), cilastatin is widely used in clinical applications and has prosper- ous prospects[1]. In industrial manufacture[2―6], as the optical intermediate, the chemical and optical purity of (+)-DMCPCA would affect the quality of cilastatin. So, the separation and purification are impo…     

实时交互式虚拟EAST系统

实时交互式虚拟EAST(全超导托卡马克)系统能够三维重现EAST装置,在线获取EAST实验工程数据,实时显示等离子放电位形等三维物理实验成果。该系统采用B/S(浏览器/服务器)结构框架,结合了VRML(虚拟现实建模语言)和Java3D两种虚拟现实技术。利用VRML建立EAST三维仿真模型,结合Java3D实现用户与场景的交互,最终实现一个实时、动态的三维物理实验系统,从而推动EAST实验的进行。     

基于FDR原理的自动灌溉系统设计

利用土壤的介电特性测量土壤含水量是一种快速、简便、可靠的方法。根据频域反射(FDR)法测量原理,电磁波在土壤中的传播频率可用来测试土壤的介电常数,从而得到土壤容积含水率,设计出了一种基于FDR原理的自动灌溉系统,介绍了FDR测量原理,阐述了自动灌溉系统的软硬件构成,土壤水分传感器测得的土壤水分含量信息,经信号处理,输出为0~5V电压信号,经A/D转换送至AT89S52单片机进行判断处理,根据输出数值的大小控制电磁阀的通断时间,从而实现自动灌溉和节水灌溉的目的。试验表明:该系统工作稳定,控制准确,反应灵敏,满足自动灌溉要求。     

S2/TDE85复合材料耐自然库存与加速湿热老化的性能研究

本文对高强2号玻璃纤维（S2）增强环氧（TDE85－MCD体系）基复合材料单向板经自然库存与加速湿热老化后力学性能的变化进行了研究。研究结果表明，温度和湿度的作用会使单向板的拉伸、弯曲、剪切性能有所降低；温度越高、湿度越大，力学性能变化越大；可用加速湿热试验值来表征自然库存条件下的试验值。     

基于ARM9与Linux智能搬运分拣机器人的设计与实现

给出了嵌入式ARM-Linux平台环境下的智能搬运分拣机器人的设计方案。其硬件平台是以ARM9架构处理器S3C2440A作为系统控制核心,并根据硬件资源对kernel、根文件系统以及应用程序进行了修订和编译,为机器人构建了Linux系统软件平台。同时还采用了一种改进型SIFT算法进行货物识别。凭借着强大硬件性能、开放的软件系统以及高效的匹配算法,使本机器人动作稳定性好、拓展性强以及识别精准度高等特点,能够工作在多种作业环境下。     

基于B/S模式的数据库应用系统安全

随着数据库技术和管理信息系统的发展,两者的结合越来越紧密,其安全性正逐步引起人们的重视。数据库应用系统是在数据库管理系统支持下建立的以数据库为基础和核心的计算机应用系统,由数据库系统、应用程序系统和用户组成。文中主要探讨了基于B/S模式的SQL Server数据库应用系统的安全问题。结合B/S模式的三层结构,分别从应用程序、服务器和数据库层次进行安全性研究。其中,应用程序安全采用输入验证、输出编码和会话管理技术;服务器安全采用安全协议、操作系统安全、防火墙技术和防SQL注入攻击技术;数据库安全技术采用用户认证、访问控制、数据加密、审计追踪和视图机制技术。     

Predicting external sulphur requirement of alfalfa from sulphate sorption isotherm of Tanzanian soils

For Tanzanian soils dominant in hydrous oxides of iron and amorphous ferri-alumino silicate, a 48-hour (hr) mixing period with the sulphate (SO₄) solution was adequate for a near-equilibrium condition. Although differing in their SO₄ sorption capacity, all the soils sorbed SO₄ at or beyond 1µg ml^–1 sulphur (S) concentration in the supernatant. Hydroxyl (OH) ions were displaced during SO₄ sorption as indicated by a significant positive correlation between the amount of sorbed SO₄ and the difference in pH values determined in 0.1N K₂ SO₄ and 0.1N KCl, i.e. the dpH values.In a greenhouse experiment, alfalfa was grown on eight soils at six adjusted S concentrations. Sulphur deficiency symptoms appeared in the control pots of those soils which were low in native sorbed SO₄, SO₄ sorption capacity and initial soil solution S concentration. Sulphur fertilization increased dry matter (DM) yield as well as response to applied S. The external S concentration, i.e. adjusted S concentration required for 95% of the maximum DM yield, ranged from 0.8 to 8.2µg S ml^–1 with values less than 2.0 on most of the soils. The external S concentration decreased hyperbolically as the SO₄ sorption capacity of the soils increased. The total amount of fertilizer S required to obtain the external S concentration in solution, and at the same time satisfy the SO₄ sorption capacity of the soil at the external S concentration (determined from the sorption isotherm) was defined as the external S requirement for the specified yield level of alfalfa. The external S requirement for 95% of the maximum yield of alfalfa varied from soil to soil due to differences in their capacity and intensity for S nutrition.Part of a thesis by the senior author for the MSc (Agric) degree of the University of Dar es Salaam     

基于重标极差法和神经网络的隧道变形趋势判断

为准确、科学及全面地对隧道变形进行趋势判断和预测分析,将隧道的变形过程划分为中期阶段和长期阶段,利用R/S分析对其位移序列和速率序列进行趋势判断研究,再利用PSO-BP神经网络对各阶段的变形进行预测,将预测结果与R/S分析结果进行对比,验证两者的一致性。利用两个工程实例进行检验,得出各序列的Hurst指数均大于0.5,说明各序列均具有持续变形的长期性,且位移序列的趋势性均大于速率序列的趋势性;同时,变形预测结果也显示隧道后期变形将持续增加,验证了R/S分析的准确性。     

Dynamic output feedback control of a flexible air-breathing hypersonic vehicle via T–S fuzzy approach

By utilising Takagi–Sugeno (T–S) fuzzy set approach, this paper addresses the robust H_∞ dynamic output feedback control for the non-linear longitudinal model of flexible air-breathing hypersonic vehicles (FAHVs). The flight control of FAHVs is highly challenging due to the unique dynamic characteristics, and the intricate couplings between the engine and fight dynamics and external disturbance. Because of the dynamics’ enormous complexity, currently, only the longitudinal dynamics models of FAHVs have been used for controller design. In this work, T–S fuzzy modelling technique is utilised to approach the non-linear dynamics of FAHVs, then a fuzzy model is developed for the output tracking problem of FAHVs. The fuzzy model contains parameter uncertainties and disturbance, which can approach the non-linear dynamics of FAHVs more exactly. The flexible models of FAHVs are difficult to measure because of the complex dynamics and the strong couplings, thus a full-order dynamic output feedback controller is designed for the fuzzy model. A robust H_∞ controller is designed for the obtained closed-loop system. By utilising the Lyapunov functional approach, sufficient solvability conditions for such controllers are established in terms of linear matrix inequalities. Finally, the effectiveness of the proposed T–S fuzzy dynamic output feedback control method is demonstrated by numerical simulations.     

An analysis of transport phenomena for multi-solid particle systems at higher reynolds numbers by a standard karman—pohlhausen method—I Momentum transfer

Using the concentric spheres free surface model and a standard 4th polynomial Karman—Pohlansen method, the dimensionless tangential stress distribution, and the dimensionless pressure distribution around a solid sphere in a swarm, and the viscous, form and total drag coefficient for multi-solid particle systems were computed numerically at higher Reynolds numbers. The void function obtained from the drag coefficient for multiparticle system was comparative to the experimental data. The friction factor for multi-particle systems so computed agreed with the experimental data of packed and distended beds.