尼龙6/马来酸酐-苯乙烯多单体接枝聚丙烯反应共混物

用双螺杆挤出机制备了聚丙烯(PP)与尼龙6(PA6)的共混物．先用多组分熔融接枝的方法将马来酸杆（MAH）和苯乙烯（St）共同接枝于聚丙烯（PP）上，制得多单体接枝聚丙烯PP-g-(MAH-St），该接枝物具有较高的MAH接枝率。利用MFR、SEM、TEM和力学性能测试等分析方法，研究了多组分熔融接枝聚丙烯PP-g-(MAH-St)对PA6/PP共混物的形态结构和力学性能等的影响。结果表明，PP-g-(MAH-St)中的酸酐基团与PA6末端的氨基发生化学反应，原位形成的PP-PA6共聚物能有效地改善PA6与PP的相容性，可以使PP均匀地分散在PA6基体中，相区尺寸明显减小，可至0.1μm，并使共混物的力学性能得到均衡的提高，冲击韧性的提高尤其显著，达到了橡胶改性所难以达到的效果。     

Characteristic Anthocyanin Pattern from Onions and other Allium spp

Three red onion (Allium cepa) cultivars, top onion (A. cepa var. vivi-parum), A. altaicum and chive (A. schoenoprasum) contained several or all of the following anthocyanins: 3-(6′-malonyl-3′-glucosylglucoside), 3-(3′,6′-dimalonylglucoside), 3-(6′-malonylglucoside), 3-(3′-malonyl-glucoside), 3-(3′-glucosylglucoside) and 3-glucoside of cyanidin. Trace amounts of two pelargonidin derivatives and the 3,5-diglucosides of cyanidin and peonidin were for the first time reported in red onion. Carbon NMR data showed that the sugars of the 3-(6′-malonyl-3′-glu-cosylglucoside), 3-(6′-malonylglucoside) and 3-glucoside of cyanidin were pyranoses. Substitution either by sugar or acid in the sugar 3-position of an anthocyanin has never been reported outside the genus Allium.     

超低膨胀陶瓷K_（2x）Ba_（1－x）Zr_4（PO_4）_6系统的X射线衍射

用高温Ｘ射线衍射方法对磷酸锆钡钾系统陶瓷材料的各向异性热膨胀作了研究．对七个组份试样的７７套高温Ｘ射线衍射图作了仔细的指标化和精密点阵常数测定．点阵常数随温度作非线性变化·对Ｋ_２ｘＢａ_１－ｘＺｒ_４（ＰＯ_４）_６的不同组份不同温度（３００～１３００Ｋ）的热膨胀系数。α_ａ、α_ｃ、　作了测定·该系统零膨胀陶瓷的组份为Ｋ_１．１６Ｂａ_０．４２Ｚｒ_４（ＰＯ_４）_６（ｘ＝０．５８）     

Growth rate and surface microstructure in α(6H)–SiC thin films grown by chemical vapor deposition

Monocrystalline 6H-SiC thin films have been epitaxially grown on off-axis 6H-SiC {0001} substrates in the temperature range of 1623–1873 K via chemical vapor deposition. The growth rate was a strong function of the growth temperature and the reactant gas concentration. The activation energies for growth were 64 kJ/mole and 55 kJ/mole for the (0001) Si face and the (0001) C face, respectively. The concentration of growth pits in the films increased as a function of decreasing deposition temperature, increasing concentration of reactant gases and increasing off-axis orientation. Beta-SiC islands were also observed in the epilayers when the (SiH₄ + C₂H₄)/H₂ ratio was ≥2.5:3000.     

通讯网的演进

在光纤高速传输技术、光交换与智能光网等与宽带接入、多媒体、3G等网络应用技术的推动下，建设基于IPv6协议的IP基础电信网成为可能。现在IP网正在朝着有序的、可管理的、有QoS保障的、可以支持各类业务的综合业务基础网演进。电信网也正在从网络接入层上、从长途网络层面上、从本地网络层面上、从固定网向含3G在内的移动网络等方面向支持IP技术及其综合业务的方面全面推进。     

2,6-二甲基萘生产技术进展

概述了国外2，6-二甲基萘生产技术现状，详细介绍了ExxonMobil公司2，6-二甲基萘的工艺路线和日本神户制钢所的提纯方法，指出了实现我国2，6-二甲基萘工业化生产应注意的问题。     

溶剂萃取分离锂同位素研究Ⅱ.苏丹Ⅰ-中性配位体协萃体系萃取分离锂同位素效应探讨

文章讨论了苏丹I-中性配位体协萃体系萃取分离锂同位素中螯合剂和协萃剂的结构效应。为了获得高的同位素分离效应,螯合剂必须是弱酸性的(PK_α>11),具有强的分子内氢键及易于形成六元螯合环。协萃剂结构不仅要求无空间位阻,而且具有强的配位基。α随配位基的碱性增大而相应提高。萃取络合物中螯合环的增多亦有利于体系α的提高。此外本文还讨论了一些萃取体系的同位素富集方向和萃锂体系用于分离同位素的前景。     

Magnetism in SiC implanted with high doses of Fe and Mn

High concentrations (0.1–5 at.%) of Mn or Fe were introduced into the near-surface region (≤2000 Å) of 6H-SiC substrates by direct implantation at ～300°C. After annealing at temperatures up to 1000°C, the structural properties were examined by transmission electron microscopy (TEM) and selected-area diffraction pattern (SADP) analysis. The magnetic properties were examined by SQUID magnetometry. While the Mn-implanted samples were paramagnetic over the entire dose range investigated, the Fe-implanted material displayed a ferromagnetic contribution present at <175 K for the highest dose conditions. No secondary phases were detected, at least not to the sensitivity of TEM or SADP.     

从催化裂化柴油中分离高纯度2,6-二甲基萘

以大庆石油化工总厂炼油厂催化柴油为原料 ,通过精馏分离得到二甲基萘 (DMN)窄馏分 (2 5 8～ 2 70℃ ) ,经糠醛溶剂抽提 ,减压蒸馏后 ,在 -10～ -2 5℃冷冻 2～ 5h ,离心分离制得纯度约 80 %的粗 2 ,6 DMN ,再经无水乙醇在 -10～ -2 5℃重结晶 ,得到纯度大于等于 98%的 2 ,6 DMN。     

C5/C6异构化催化剂的首次工业应用

采用中石化金陵分公司研究院研制的CI-50(Pd/丝光沸石)作C5/C6烷烃异构化催化剂.详细介绍了该催化剂的工业放大试验装置的工艺流程、首次开工过程中技术问题及处理方法.