Effect of Pt Incorporation into Ni/ZrO2–SO 4 = /Al2O3 Catalyst for n-Butane Isomerization

Three Ni/ZrO₂–SO₄⁼/Al₂O₃ catalysts with different concentrations of platinum (0.2, 0.3 and 0.4 wt%) were prepare and tested for n-butane isomerization reaction at 338 K, in absence and in presence of hydrogen. The results shown that, at low temperature, platinum contributes to the olefin or butyl ion formation and the reaction follows a bimolecular pathway. However, when the reaction occurs in the presence of hydrogen, the formation of butyl ions is inhibited. The main feature of platinum addition is the stabilization of the catalytic activity, which is indicated by the slow deactivation constants compared to that of the unpromoted catalyst.     

聚己二酸1,2-环己二醇酯的合成

采用正交实验方法,分别以钛酸四丁酯和对甲苯磺酸为催化剂,合成了聚己二酸1,2 环己二醇酯,对其合成工艺条件进行了研究,得出了最佳工艺条件。并以所得聚酯合成了具有透明度高、硬度大、耐磨、玻璃化温度高等优异性能的聚氨酯材料。     

添加物对ZrO2系快离子导体烧结性能的影响

本文介绍了１３２０℃下，ＣａＯ，Ｙ２Ｏ３等稳定剂，低融物组成及１－６价阳离子化合物对ＺｒＯ２烧结性能的影响并列举出材料的晶型及某些主要性能。     

莫达非尼的绿色化学合成

采用[bm im]BF4离子液体作为反应溶剂,以二苯甲硫醇为原料,经醚化、氨解、氧化得到新型提神醒脑药物莫达非尼。讨论了不同的氯乙酸酯和反应温度对醚化反应收率的影响,讨论了不同的二苯甲硫乙酸酯对氨解反应收率的影响,及离子液体的回收使用。研究表明,采用氯乙酸甲酯作为醚化试剂,反应时间4 h,反应温度100℃,二苯甲硫醇∶氯乙酸甲酯=1∶1.5(摩尔比),室温下氨解反应20 h,二苯甲硫乙酰胺收率76%;采用过氧化氢作为氧化试剂,反应时间3 h,反应温度60℃,过氧化氢∶二苯甲硫乙酰胺=1∶1(摩尔比),莫达非尼收率79%,反应总收率可达48%。     

The influence of F doping on the activity of PbO2 film electrodes in oxygen evolution reaction

The PbO₂ and F⁻-doped PbO₂ (F-PbO₂) film electrodes have been prepared by an electrodeposition process onto platinum substrate. The changes of their electrochemical activity for oxygen evolution (OE) reaction with accelerated electrolysis time have been studied. The results show that the activity of the electrodes decreases with increasing electrolysis time. This can be attributed to the conductivity variations, which are caused by the decrease of the oxygen vacancy concentration in PbO₂ films during OE. The mechanism of the decrease of the oxygen vacancies has been investigated. For F-PbO₂ film electrodes, though its electrochemical activity is somewhat lower than that of undoped one, its activity stability is much higher in comparison with that of PbO₂. The influence of F⁻ doping on the activity of PbO₂ film electrodes has been also discussed.     

高硫石油焦燃烧固硫基础性研究及工业技术的进展

本文概述了高硫石油焦固硫的基础性研究及工业上的最新进展。     

Coking kinetics of a Cr2O3/Al2O3 catalyst during 1-butene dehydrogenation: Effect of H2 partial pressure

The influence has been studied of the partial pressure of hydrogen (0–30 kPa) upon the coking rate of a Cr₂O₃/Al₂O₃ commercial catalyst during 1-butene dehydrogenation. Coke deposition has been analysed using a monolayer-multilayer reversible coke growth model (MMRC model). This model provides good fits to the experimental data, within the range of partial pressure of H₂ studied, and allows us to estimate the main kinetic parameters involved in the coking-deactivation process. The results obtained reveal a dual effect of hydrogen: competition against 1-butene for the active sites and the removal of coke precursors from the catalyst surface. Bom effects diminish the coking rate as the H₂ partial pressure is increased.     

纳米SiO_2粒子在环氧树脂中的分散工艺研究

研究了纳米SiO2在环氧树脂中的均匀分散工艺,探讨了超声波振荡和超声波分散时间对纳米SiO2/EP复合材料力学性能的影响,确定了最佳分散工艺。SEM表明,采用高剪切与超声波复合分散工艺比高剪切工艺的分散效果好;测试了复合材料的力学性能,进一步证明纳米SiO2具有增韧增强作用。     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

月桂氮草酮研究进展

介绍了月桂氮草酮作为高效皮肤促渗剂的发展概况、合成工艺、研究进展及其应用前景。