Dehydrogenation of Cyclohexene on Platinum Nanoclusters on a Thin Film of Al2O3/NiAl(100)

Using a scanning-tunneling microscope, reflection high-energy electron diffraction and photoelectron spectra with synchrotron radiation, we investigated the temperature dependence of the dehydrogenation of cyclohexene (C₆H₁₀) adsorbed on Pt nanoclusters supported on an ultra-thin film of Al₂O₃/NiAl(100). The Pt clusters, grown by vapor deposition, are structurally ordered and exhibit a mean diameter 2.2 nm and height 0.4 nm. The progress of dehydrogenation was monitored through the temporal variation of C 1s photoelectron spectra; analysis of these features revealed that the dehydrogenation of cyclohexene with increasing sample temperature occurs as a sequential process beginning around 150 K, a temperature significantly less than that for Pt single-crystal surfaces. The dehydrogenation behavior, particularly the decomposition into elemental carbon, is found to vary with Pt coverage.     

基于STM32F103的随钻测量系统

本文在仔细分析了随钻测量系统的工作原理之后,给出了随钻姿态测量的具体方法. 并使用STM32F103RET7和LSM303完成核心电路的设计. 完成数据采集和处理的工作. 最后给出上位机Labview程序实现数据的实时显示. 实验表明本文设计的嵌入式随钻测量系具有集成度高,精度高等特点.     

基于ACS712的直流电机电流监测系统的设计

设计了直流电机运行电流的硬件采集电路,解决了高速下电枢绕组电流的采集问题。利用霍尔电流传感器ACS712通过AD转换将采集到的绕组电流数据,通过串口和上位机进行通信,实现了本机LCD液晶显示和基于LabVIEW的软件界面显示电流数据,具有实际的工程意义。     

基于可调功率因数的单相AC－DC变换电路设计

本文以2013年全国大学生电子设计竞赛A题为依据,设计的单相AC-DC变换电路32位的STM32f103作为主控制器,主电路由220V市电经过自耦变压器,隔离变压器降至20-30V交流电,后接全桥整流电路,使电路稳定输出36V直流电,主电路通过硬件电流电压PI闭环控制,双环控制来调节输入的电流和输出电压,输入的交流电压和交流电流通过互感器采到单片机内,程序通过改变产生的正弦波的相位来改变功率因数,从而达到功率因数可调的目的,使设计的电路能包含题目中要求的所有部分,并通过优化而达到题目的要求,在主电路中加入继电器,控制继电器断开从而实现过流保护的功能。     

基于单片机的红外通讯系统设计

本文阐述了红外通讯的原理,介绍了一种基于51单片机的红外通讯实现方法,包括硬件电路和C程序设计,程序通用性好,易于移植于其它控制器.通过实验测试,实现了数据可靠发送和接收,表明了此方法的有效性.     

Agronomical evaluation of phosphate fertilizer as a nutrient source of phosphorus for crops: Isotopic procedure

The agronomic effectiveness of P fertilizers, as sources of phosphorus for crops, was evaluated using the quantities, P_f, of phosphorus taken up byLolium perenne grown on 14 soils during greenhouse experiments in pot cultures. The P_f quantities were determined using³²P-labelled fertilizers. Data were analysed using a new concept: the Isotopic Relative Agronomic Effectiveness (IRAE). The IRAE value was defined as the ratio of the P_f quantity, taken up by a crop, of a tested fertilizer over the P_f quantity, taken up by a crop, of a fertilizer used as standard. In our experiments diammonium phosphate (DAP) was used as standard P fertilizer and two rock phosphates, the North Carolina rock phosphate (NCPR) and a calcium-iron-aluminium phosphate (Phospal), were tested. As a linear relationship between P_f(NCPR) quantities and P_f(DAP) quantities was obtained, with r² = 0.95, when the application rates increased from 15 mgP (kg soil)^–1 to 200 mgP (kg soil)^–1, it is conciuded that IRAE values for a given fertilizer, other than the standard fertilizer, could be determined with a single rate of application. As regards soil pH in the range 4.7 to 8.2 the IRAE_NCPR is related to soil pH by a curvilinear relationship: log IRAE_NCPR = –(0.44) pH + 4.05 with r² = 0.89. The average of IRAE_phospal values was 0.15 with a standard error = 7% irrespective of soil pH. Then a logarithmic relationship was obtained between IRAE values of the two tested fertilizers and their water P-solubility determined at the soil pH where they were applied.     

32位和8位单片机的无线传感器网络系统

采用STM32F10X系列的芯片为主芯片、SH79F32为辅芯片,温度传感器DS18B20做采集工具,PTR8000无线模块做通信工具,实现无线传感器网络功能。通过Altium Designer Release 10进行原理图设计及PCB板的绘制,并制作电路板、焊接电路板,之后利用Keil软件设计程序,实现不同单片机之间的无线传感器网络通信,并完成了无线通信平台的设计与制作。     

AVR单片机的调频立体声收音机设计

介绍一种以低功耗单片机ATmega8L为控制核心,以RDA5807P芯片作为FM接收器的调频收音机。该收音机通过单片机ATmega8L的I2 C总线接口读写RDA5807P收音模块的数据,用按键及红外遥控器进行搜台、音量调节等操作。用LCD显示接收频道的频率,当前音量大小等信息。设计中给出了实现FM调频收音机的硬件电路、读/写RDA5807P收音模块及红外遥控解码程序的思路。经多次比对测试,该收音机可以清晰、稳定地收听省府及本地发射的所有调频电台。     

MCU平台的嵌入式系统软件设计研究

嵌入式系统的运行需要可靠性和实时性的保证,因此良好的可靠性和实时性是嵌入式系统软件设计的重要标准。同时为了使软件系统的鲁棒性更强,嵌入式系统的设计需要一个非常好的软件架构。这里介绍了一种基于MCU平台的嵌入式系统软件架构方法。在这个方法中,事件驱动机制的引入满足了对软件架构的要求,主程序中不仅采用了优先调度机制,同时也加入了软件抗干扰措施,这些都使系统的实时性和可靠性得到了明显的提高。设计实验比较由该方法得到的软件架构与原始软件架构的实时性,得出由该方法优化后的软件架构确实具有更好的性能。     

宽带直流放大器的增益控制设计与研究

首先进行了方案论证与比较,分析各种方案的优点缺点,最后选择亚德诺半导体公司生产的低噪声增益可控集成运算放大器AD603和电流反馈型宽带运算放大器AD811等器件设计宽带直流放大器。输入级采用两级AD603级联,输出级设计通频带0~10MHz的带宽,通过单片机可以对放大器增益进行控制。该放大器具有频带宽、功率高、增益可调、带宽可选择等特点。此外,对提高直流放大器的各种性能指标提出了多种具体措施,在要求较高的系统中具有较强的实用性。