SOE系统输入卡件的设计

事件顺序记录,即SOE（Sequence of Events）系统可以正确、快速地确定事故故障,迅速处理事故,恢复系统的正常运行。SOE系统中输入卡件的设计,包括卡件的组成及软件模块的设计。产品测试表明,系统接收多点数据信息正确,能够及时准确的反映数据采集的实时数值,并提供报警信息。     

Phosphorus availability from phosphate rock and sewage sludge as influenced by the addition of water soluble phosphate fertilizer

Phosphorus (P) inputs are required for sustainable agricultural production in most acid soils of the tropics and subtropics. Phosphate rocks (PR) and organic materials have been suggested as alternative P sources in these soils. Quantitative information on the P availability from sewage sludge (SL) is scanty. Methods to improve the effectiveness of PR such as partial acidulation and compaction with water-soluble P sources have been recommended. The objective of this greenhouse study was to evaluate the relative agronomic effectiveness (RAE) of Florida PR and sewage sludges (irradiated and non-irradiated) applied alone and in mixture with a water-soluble source (triple superphosphate, TSP) at two rates (50 and 150 mg P kg^–1 soil). The ³²P isotope dilution technique was utilised to determine the proportion of P in the plant taken up from the P fertilizer treatments. Wheat was grown on an acid loamy sand Dystric Eutrocrepts and harvested 6 weeks after planting. Results on total P uptake and the RAE of the P fertilizer sources tested indicated that the addition of 50 mg P kg^–1 soil as TSP was adequate in supplying P to the 6-week-old wheat plants as compared to PR and sewage sludge. Intermediate values were obtained for the mixtures. Similar responses were observed for the high P rate. For a given P rate, phosphorus uptake from PR and SL in presence of TSP was higher than P uptake from these sources alone, indicating an enhancement effect of TSP on the effectiveness of these non-readily available sources. With respect to P uptake from PR applied alone, the relative increases in P uptake from PR due to TSP influence were 52 and 67% for the low and high P rates, respectively. The relative increases in P uptake from SL due to TSP when compared to P uptake from SL alone were 102 and 59% for the low and high P rates of application. Application of a water-soluble P fertilizer together with a non-readily available P source shows an enhancement on the P uptake from the non-readily available P source by the wheat plants. In this experiment the estimated enhancement effects are very likely underestimated.     

剖析F型、GK型密炼机结构特征

目前，以美国F型和德国GK型为代表的密炼机已在我国基本上实现了国产化。对这两类密炼机的结构特点和安装、使用上的利与弊，本文从密炼装置、转子密封装置、卸料装置、锁紧装置到主传动5个方面作了详细的剖析，并在此基础上，提出一个取长补短的新的密炼机设计方案。     

C．F．布朗深冷净化系统模拟分析

通过模拟计算对深冷净化系统做了深入的分析，研究了深冷净化系统脱除甲烷化气中过量氮、甲烷、惰气和回收弛放气中氢的能力，甲烷化气组成和压力对净化效果和操作稳定性的影响。     

UHTCC/RC复合梁剪切性能试验研究

超高韧性水泥基复合材料(UHTCC)以其多重细密稳态开裂模式在宏观上展现出拉应变硬化特征,具有优异的裂缝控制能力,可用作修补材料。采用UHTCC替代部分受拉区混凝土对有腹筋UHTCC/RC复合梁进行了剪切性能研究。试验变量为UHTCC层厚度。结果表明:不同UHTCC层厚度的UHTCC/RC复合梁,其抗剪承载力均明显高于RC对比梁;即便配置较密集的箍筋,仍然无法阻止界面剥离,但可以避免界面剥离产生的荷载抖降;UHTCC能够限制和分散上层混凝土中的裂缝。最后,给出了UHTCC/RC复合梁在实际应用中的建议。     

F离子掺杂TiO2的性能研究

以NH4F为掺杂剂，采用溶胶-凝胶法制备F离子掺杂型TiO2光催化剂，对其进行XRD、XPS和PL表征，结果表明，F离子掺杂ToO2由于Ti—F配位体的形成而能抑制金红石相的生成，同时F离子掺杂能增加TiO2表面缺陷浓度并降低Ti2P键的结合能，另外，由于F离子能取代Ti—OH配位体而降低了表面羟基氧浓度．光催化研究结果表明，F离子掺杂提高了TiO2光催化活性近1．5倍．     

基于MSP430单片机远程家庭环境监测报警器的设计与实现

随着物联网的发展,本文介绍一种基于GSM 的家居环境监控系统。主要以MSP430单片机为控制中心, YM12864液晶显示器和WTV020-SD语音模块作为人机交互设备,TC35i作为GSM通信模块,设计利用温、湿度传感器DHT11,MQ系列烟雾传感器等对环境的温度、湿度、烟雾、可燃气体等进行实时监测并实现现场参数的显示、报警、语音提示与远程手机报警,可将测得的数据传送由单片机处理后通过GSM通信模块将转换来的数据以短信的方式发送到手机,达到远程监测的目的。     

Dehydrogenation of Cyclohexene on Platinum Nanoclusters on a Thin Film of Al2O3/NiAl(100)

Using a scanning-tunneling microscope, reflection high-energy electron diffraction and photoelectron spectra with synchrotron radiation, we investigated the temperature dependence of the dehydrogenation of cyclohexene (C₆H₁₀) adsorbed on Pt nanoclusters supported on an ultra-thin film of Al₂O₃/NiAl(100). The Pt clusters, grown by vapor deposition, are structurally ordered and exhibit a mean diameter 2.2 nm and height 0.4 nm. The progress of dehydrogenation was monitored through the temporal variation of C 1s photoelectron spectra; analysis of these features revealed that the dehydrogenation of cyclohexene with increasing sample temperature occurs as a sequential process beginning around 150 K, a temperature significantly less than that for Pt single-crystal surfaces. The dehydrogenation behavior, particularly the decomposition into elemental carbon, is found to vary with Pt coverage.     

低功耗WSN节点及其接口协议的设计

提出了一种基于MSP430和CC2530的低功耗无线传感器网络节点的设计方法。从硬件和软件两个方面阐述了这种设计方法及其具体实现,通过实验完成了对节点消耗电流的测量和分析。应用结果表明,采用这种方法设计的节点能够在低功耗的条件下稳定可靠地工作。     

基于STM32F103的随钻测量系统

本文在仔细分析了随钻测量系统的工作原理之后,给出了随钻姿态测量的具体方法. 并使用STM32F103RET7和LSM303完成核心电路的设计. 完成数据采集和处理的工作. 最后给出上位机Labview程序实现数据的实时显示. 实验表明本文设计的嵌入式随钻测量系具有集成度高,精度高等特点.