基于GIS的水电工程可视化辅助设计理论与方法

针对当前水电工程设计领域存在的计算机应用水平还有待于提高，设计过程复杂且不直观等情况，在探讨工程可视化辅助设计(VCAD)基本概念及其理论构成体系的基础上，提出了基于GIS的水电工程可视化辅助设计理论与方法，实现了直观方便的设计建模和设计过程的交互控制，以及设计成果的直观形象表达，从而有助于提高工程设计的效率和质量，也为大型水利水电工程设计提供了一种新的辅助手段．     

Sociotechnical systems, risk management, and public health: comparing the North Battleford and Walkerton outbreaks

Accidents in different complex sociotechnical systems are rarely compared using the same theoretical framework for risk management. We conducted a comparative analysis of two Canadian public health disasters involving drinking water distribution systems, the North Battleford Cryptosporidium parvum outbreak in April 2001 and the Walkerton E. coli outbreak in May 2000. Both accidents resulted from a complex interaction between all levels of a complex sociotechnical system. However, the low-level physical and individual factors differed in the two cases, whereas, the high-level governmental and regulatory factors tended to be the same. These findings may have implications for the design of public policies to minimize risk in complex sociotechnical systems.     

PLC在中低压配电网自动化RTU中的应用

本文介绍了以PLC为主体的中低压配电网自动化中RTU的硬件组成和PCL软件设计。     

阴,阳离子聚合物地层内凝胶化改善水驱效果的研究

研究了一杆阴离子聚合物（Ａｃ５３０）和一种阳离子聚合物（Ｍｂ５８１）在水溶液中形成凝胶的条件和过程、凝胶化学结构、形态、稳定性和力学性能。在模拟地层的二维微观模型内观测了两种聚合物驱替渗流、相逼、形成凝胶、凝胶封堵大孔道的机理。在亲水填砂模型内测定了阴、阳离子聚合物凝胶体系降低渗透率的能力。     

新型NTC热敏电阻材料—含铜Mn系铁氧体的研究

研究了含铜Mn系铁氧体的阻温特性,目的是用廉价的铁氧体取代价格昂贵的、传统的Mn Ni Co氧化物、负温度系数热敏电阻。通过Cu~(2+)离子取代Fe~(2+)离子或Mn~(2+)离子,及改变淬火工艺,可以改变Mn系铁氧体整体电阻率ρ和材料参数B,得到可与传统氧化物器件相比拟的性能。     

Test Case Generation as an AI Planning Problem

While Artificial Intelligence techniques have been applied to a variety of software engineering applications, the area of automated software testing remains largely unexplored. Yet, test cases for certain types of systems (e.g., those with command language interfaces and transaction based systems) are similar to plans. We have exploited this similarity by constructing an automated test case generator with an AI planning system at its core. We compared the functionality and output of two systems, one based on Software Engineering techniques and the other on planning, for a real application: the StorageTek robot tape library command language. From this, we showed that AI planning is a viable technique for test case generation and that the two approaches are complementary in their capabilities.     

烧结工艺对液相合成（SrPb）TiO3基陶瓷热敏特性影响的研究

本文在液相合成（ＳｒＰｂ）ＴｉＯ３粉的基础上，研究了升温速率、保温时间、烧结温度及降温方式对（ＳｒＰｂ）ＴｉＯ３基陶瓷的Ｖ型ＰＴＣ热敏特性的影响。实验表明：升温速率对其热敏特性影响不大，保温时间和烧结温度的作用是一致的，具有一最佳范围。而降浊方式对材料的热敏特性影响较大。综合各因素的影响，本配方中，样品的烧结制度定为：以２００℃／ｈ的速率升温，在１２５０℃保温１ｈ，炉冷至９５０℃，保温０．５ｈ，再     

地下通风系统管理的新技术——系统特征图

本文介绍系统特征图的原理与方法 ,及其推广应用的前景     

单片机仿真系统

本文讨论单片机离线仿真系统的设计方法，其关键技术是：单片机硬件系统（ＲＡＭＲＥＧＩＳＴＥＲＳ）仿真，指令系统仿真，中断系统仿真，应用系统硬件仿真。     

I／A智能自动化系统总体构想

I/A DCS智能自动化系统是Foxboro公司80年代后期推出的DCS新产品。本文介绍了其体系结构、主要技术指标、硬件系统设计、软件系统设计、通信网络、集成控制概念及系统开放思想。从而,为建立我国自己的DCS产品提供参考。