机电一体化技术在综合采煤设备中的应用与发展

介绍了机电一体化技术在国内外煤矿井下综采设备中的应用，并论述了机电一体化技术发展与相关技术的研究。     

未来十年综合航电系统的发展趋向

本文主要阐述未来十年国外综合航电系统的总的发展趋向，重点介绍了在开放式系统结构的研究与应用、采用COTS技术、模块化、多传感器综合技术等方面的发展趋向。     

热释电系数的测量方法

描述热释电系数的两种测量方法。其一为电荷积分法，测试系统简单，测量数据准确，且能满足零电场条件下的测量。其二为动态电流法，采用调制热源技术，研究在特定温度条件下热释电材料的动态热释电响应。     

An integral theorem prover and the role of proof planning

An investigation is made into the ways proof planning can enhance the capability of a rule based prover for the theory of integration. The integrals are of the Riemann type and are defined in a way to maximize the theorem proving methods of predicate calculus. Approximately fifty theorems have been proved and several examples are discussed. A major shortcoming was found to be the inability of the system to work with or produce a proof plan. As a result, a planning scheme based on the idea of subgoals or milestones was considered. With user defined plans, there was a substantial increase in performance and capability of the system and, in some cases, proofs which were previously unsuccessful were completed.     

拟动力实验中的数值积分方法

拟动力实验方法是目前最新的抗震实验方法，它克服了振动台实验中承载力不足、拟静力实验中无法真实模拟地震过程的缺点．本文详细论述了拟动力实验中的数值积分方法，其中包括：显式方法，隐式方法以及采用于结构技术时所需的特殊教值积分方法，并对这些方法的适用范围作了介绍．     

集成pH－ISFET／压力传感器的研究

基于ＳＤＢ／ＳＯＩ材料和硅微机械加工技术，提出了一种含微参比电极和择优差分补偿单元的背面引线ＰＨ－ＩＳＦＥＴ／压力传感器的新结构。并且设计了高稳定的可调芯片自恒温系统，以减少硅材料对温度敏感的效应。这种结构既方便地实现敏感元和信号处理电路的完全隔离，又有效地改善了敏感特性和稳定性。初步实验结果证实了新结构设计是成功的。     

陶瓷传感器的微型化与集成化

本文主要介绍陶瓷传感器在微型化及集成化方面的进展；指出了集成化多功能传感器存在的技术问题及未来发展趋势。     

电容检测纱线传感器转换特性对纱线不匀率测试的影响

讨论了纱线测试中受电容检测纱线传感器转换特性的非线性影响，测得的条干不匀率值与纱线的实际条干不匀率值之间的差异，从理论上估计了纱线在不同的电容检测槽内测试时，由于其截面充满系数不同而引起的相对差异，并用试验数据加以验证。     

Implicit integration and consistent tangent modulus of a time‐dependent non‐unified constitutive model

This paper describes the implicit integration and consistent tangent modulus of an inelastic constitutive model with transient and steady strain rates, both of which are time‐ and temperature‐dependent; the transient rate is influenced by the evolution of back stress decomposed into parts, while the steady rate depends only on applied stress and temperature. Such a non‐unified model is useful for high‐temperature structural analysis and is practical owing to the ease in determining material constants. The implicit integration is shown to result in two scalar‐valued coupled equations, and the consistent tangent modulus is derived in a quite versatile form by introducing a set of fourth‐rank constitutive parameters into the discretized evolution rule of back stress. The constitutive model is, then, implemented in a finite element program and applied to a lead‐free solder joint analysis. It is demonstrated that the implicit integration is very accurate if the multilinear kinematic hardening model of Ohno and Wang is employed, and that the consistent tangent modulus certainly affords quadratic convergence to the Newton–Raphson iteration in solving nodal force equilibrium equations. Copyright © 2003 John Wiley & Sons, Ltd.     

精馏塔静态仿真：Ⅰ.静动态混合数学模型的应用

本文为了克服精馏塔静态仿真不易收敛和初值难以给定等难题，巧妙地利用隐含数值积分方法的特点，将稳态与动态数学模型耦合起来，用以求解高难度的非理想精馏塔静态仿真问题。所得静动态混俣模型大大提高了精馏塔静态仿真的鲁棒性，对于高度非理想精馏塔的仿真尤为有效。通过对某丙烯腈萃取精馏塔的静态仿真，充分证明了这种混合模型化方法的可行性。