实现卷板合理剪裁提高卷－带成材率的探讨

以热轧宽卷板作为焊管坯料，在宽度方向上纵向剪切成规格的带钢，各种焊管规格坯料搭配剪裁，提高管坯利用率     

改进型HV高强度凝胶堵水体系的应用

为解决HV高强度凝胶堵水技术现场效果与室内性能评价存在差异等问题,以吴起区块延10油藏为例,提出了关井后管柱内动态压力对凝胶堵水效果的影响,并通过添加LCR促进剂优化出一种改进型HV高强度凝胶堵水体系,基于成胶时间、稳定性、动态压力及安全性能等进行实验评价。结果表明：快速成胶可以解决动态压力对凝胶稳定性产生的影响,同时优化得到了改进型HV高强度凝胶堵水体系,即为0.8%改性聚合物主剂+5.5%低聚酚醛树脂交联剂+0.03%助剂+0.012% LCR的促进剂,其成胶时间、成胶强度、老化稳定性、施工安全性均符合封堵要求和施工要求,并能在动态压力下保持稳定性和抗剪切作用。矿场试验后,取得了很好的增油降水效果,措施井降水最高达37.78%,平均日增油2.89 t,且有效期达9个月,取得了良好的堵水效果。     

化工厂房钢筋混凝土框架节点抗震设计

通过分析化工厂房钢筋混凝土框架节点在地震作用下破坏特征,结合框架结构的变形特点,针对化学介质的腐蚀性,提出了提高框架节点抗剪强度、优化抗震设计的措施。     

CCD实时图像采集处理系统测量透镜像差

本文给出用CCD摄像机及DIP图像处理系统在双频光栅剪切光路中测量透镜像差的原理和实测结果。     

基于横向剪切的四向最小二乘相位解包裹算法

为了解决相位变换过快导 致相位离散梯度不连 续及解包裹中欠采样的出现,本文将横向剪切干涉技术引入到四向最小二乘相位解包裹算法 中。通过对包裹相位 建立二维复光场,对复光场进行剪切,一方面可以排除相位截断的干扰,另一方面剪切的引 入可以提高算法对严 重包裹相位的处理能力。实验结果表明,本文算对恢复相位信息有较好的 效果,同时具有四向 最小二乘的抑制误差传递的优点,且适合于对部分区域变化过大的相位进行解包裹。     

旋转剪切频闪散斑干涉法测量物体的固有频率

提出一种测量物体固有频率的新方法--旋转剪切频闪散斑干涉法.该方法能方便地测量振动物体的固有频率,具有较高的精度、全场显示、条纹可见度好等优点,给出了理论分析和实验结果.     

冷连轧焊缝断带概率预测与焊接剪切预控的研究与应用

针对酸洗-冷连轧联合机组生产中焊缝断带现象,分析得到其主要影响因素是热轧原料质量,主要表现为焊接处前后卷带钢厚度差较大,导致在冷轧过程中焊缝位置应力集中而断带.通过综合各项影响因素,建立了焊缝断带预测模型,实现了热轧产品质量数据以及冷轧生产计划的收集、存储,以及跨工序应用.在焊缝断带概率预测模型的基础上,建立了带钢头尾...     

PROPERTIES OF W/Cu FGMS CONTAINING 1%TiC OR 1%La2O3 PREPARED USING GSUHP

W / Cu functionally gradient materials (FGMs) containing 1%La_2O_3 and 1%TiC were prepared using graded sintering under ultra-high pressure (GSUHP). The specimens have been found to exhibit low porosity (11.57% and 11.35%, respectively). Shearing strength of the specimens between layers is good. Moreover, the specimens have still demonstrated good performance in testing thermal-shock resistance. When power density of laser is 200MWm~(-2), the specimens have been tested for thermal-shock resistance (1000 times); the specimens that contained 1%La_2O_3 were not subjected to damage, whereas those that contained 1%TiC began to crack. Finally, effect of additives on thermal-shock resistance was also preliminarily discussed.     

保温墙模复合剪力墙结构体系的施工技术

从轻骨料免拆保温墙模复合剪力墙结构体系的特点出发，说明了其施工工艺的特殊性和复杂性，重点研究了本体系墙模砌筑主要工序内容，提出了施工工艺，并总结了本体系施工工艺中的施工难点，以期促进该结构体系的推广及应用。     

Electro-elastic fields of piezoelectric materials with an elliptic hole under uniform internal shearing forces

The existing investigations on piezoelectric materials containing an elliptic hole mainly focus on remote uniform tensile loads. In order to have a better understanding of the fracture behavior of piezoelectric materials under different loading conditions, theoretical and numerical solutions are presented for an elliptic hole in transversely isotropic piezoelectric materials subjected to uniform internal shearing forces based on the complex potential approach. By solving ten variable linear equations, the analytical solutions inside and outside the hole satisfying the permeable electric boundary conditions are obtained. Taking PZT-4 ceramic into consideration, numerical results of electro-elastic fields along the edge of the hole and axes, and the electric displacements in the hole are presented. Comparison with stresses in transverse isotropic elastic materials shows that the hoop stress at the ends of major axis in two kinds of material equals zero for the various ratios of major to minor axis lengths; If the ratio is greater than 1, the hoop stress in piezoelectric materials is smaller than that in elastic materials, and if the ratio is smaller than 1, the hoop stress in piezoelectric materials is greater than that in elastic materials; When it is a circle hole, the shearing stress in two materials along axes is the same. The distribution of electric displacement components shows that the vertical electric displacement in the hole and along axes in the material is always zero though under the permeable electric boundary condition; The horizontal and vertical electric displacement components along the edge of the hole are symmetrical and antisymmetrical about horizontal axis, respectively. The stress and electric displacement distribution tends to zero at distances far from the elliptical hole, which conforms to the conclusion usually made on the basis of Saint-Venant’s principle. Unlike the existing work, uniform shearing forces acting on the edge of the hole, and the distribution of electro-elastic fields