FMS的模型参考自适应调度

用运筹学研究生产线调度问题已有几十年的历史,但由此得出的调度策略的实时性很差.1986年自动控制工作者提出了“PMS动态自适应计算机调”一词.令人感到十分新奇.可惜.从未见到任何有关的论文.本文研究FMS的模型参考自适应调度.本文采用我们提出的考虑了有限缓冲器容量的极大代数模型.环境的影响反映于对象参数的摄动,本文采用我们提出的摄动计算方法.调度器的设计采用次梯度法,以求解连续变量和离散变量混合的优化问题,附有数字实例,计算和仿真表明:FMS的模型参考自适应调度是可行的,是值得继续深入研究的。     

线性矩阵方程异类约束最小二乘解的迭代算法

多矩阵变量线性矩阵方程(LME)约束解的计算问题在参数识别、结构设计、振动理论、自动控制理论等领域都有广泛应用。本文借鉴求线性矩阵方程(LME)同类约束最小二乘解的迭代算法,通过构造等价的线性矩阵方程组,建立了求多矩阵变量LME的一种异类约束最小二乘解的迭代算法,并证明了该算法的收敛性。在不考虑舍入误差的情况下,利用该算法不仅可在有限步计算后得到LME的一组异类约束最小二乘解,而且选取特殊初始矩阵时,可求得LME的极小范数异类约束最小二乘解。另外,还可求得指定矩阵在该LME的异类约束最小二乘解集合中的最佳逼近解。算例表明,该算法是有效的。     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

Ultrasonic crack characterization via a constrained inversion algorithm

The Kirchhoff approximation is used to show that the time domain impulse response of an isolated flat crack can be given a simple geometrical interpretation in terms of the derivative of a projected length function. For an elliptical crack, this derivative can be obtained explicitly to yield the two edge-diffracted waves which originate from the flashpoints of the crack. An explicit coordinate invariant expression is obtained from this elliptical crack solution which relates the time difference, t, between the arrival of these edge-diffracted waves and the crack size and orientation. Previously, we have proposed that this expression, together with t measurements in different scattering directions, could be used in a regression analysis as the basis for performing a constrained inversion of crack scattering data (i.e., where we attempt to obtain the best equivalent flat elliptical crack that fits the scattering measurements). Here we will demonstrate some results of applying the proposed algorithm using noisy synthetic data. The sensitivity of the results to both, number of measurements and transducer orientation, will be discussed.     

断层破裂过程对减隔震桥梁地震反应的影响

为了研究断层破裂过程对减隔震桥梁地震反应的影响,提出利用相位特性模拟方向性效应的改进随机格林函数法. 以1994年美国北岭地震的断层条件为例,通过与实际地震记录对比验证模拟方法的有效性;应用改进的随机格林函数法模拟相同震中距离的4组地震动时程作为输入条件,比较断层破裂过程对相同震中距离、不同方位的减隔震桥梁地震反应影响. 结果表明,利用持时包络曲线与相位差分分布的相似性可以方便模拟随机格林函数的地震动加速度时程;在相同震中距离条件下,断层破裂方向的观测点地震动以及对应位置的桥梁结构地震反应明显大于非破裂方向位置的观测点;当破裂方向上地震动时程不具有脉冲特性时,断层周围的减隔震桥梁地震反应主要受地震动强度的影响,桥梁方位的影响不明显.     

参激随机共振及纠错码技术的应用

为了有效地降低数字信号传输过程中的比特误码率,提出了纠错编码与参数调节随机共振技术的结合.在经过噪声污染后,依据参数调节随机共振技术的性质,给出通过系统参数调节的二进制脉冲幅值调制（PAM）输入信号的渐近误码率公式,应用纠错码技术采用中间值估计的方法得到修正的比特误码率.数字仿真试验证实,理论计算结果与试验结果相吻合,纠错码技术与参激随机共振技术的结合应用于二进制基带信号传输,可以降低误码率,从而可以得到更好的效果,提高通信的可靠性和有效性.     

Numerical simulation of microstructure formation ofAZ91 using mCA method

A stochastic model for simulating the microstructure formation of Mg alloy AZ91 during solidification was developed based on the finite element method（FEM） for macroscopic model of heat transfer calculation and a modified Cellular Automaton （mCA） for microscopic modeling of nucleation, growth of crystal. In this model, the effect of solute redistribution, interface curvature and preferred orientation was considered. A numerical simulation was developed with C＋＋ program language. The computation was carded out to understand the effect of varying processing parameters, such as nucleation parameters and heat transfer coefficient, on the microstructure formation of AZ91. The result of simulation was displayed on screen.     

A NEW ELECTROMAGNETIC IMAGING SCHEME

ＡＮＥＷＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＩＭＡＧＩＮＧＳＣＨＥＭＥ①ＺｈａｎｇＲｏｎｇｆｅｎｇ，ＨｅＪｉｓｈａｎＣｏｌｅｇｅｏｆＲｅｓｏｕｒｃｅ，ＥｎｖｉｒｏｎｍｅｎｔａｎｄＣｉｖｉｌＥｎｇｉｎｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏ...     

用WKB方法讨论透射系数和反射系数

本文用WKB近似方法讨论了势垒贯穿问题系数T和其透射反射系数R之和恒等为1,即满足恒等式T R=1,并进一步得出这一结论不仅适用于一般势垒贯穿而且在方势垒贯穿中也成立,最后讨论了势垒贯穿的几种极限情况,例如,h→0(即经典情况),势垒高度v→∞、v→0,势垒宽度a→∞、a→0,等几种特殊情况下的T及R的取值问题。