基于可编程逻辑阵列的RS232至RS422的串行口扩展电路

介绍了利用可编程逻辑阵列把1路RS232扩展至4路RS422的串行口电路设计方法。该扩展电路不占用PC系统资源，同时具有结构简单，使用方便，通用性和可补性强等特点，可广泛应用于主从式多机通讯系统中。     

近年西方国家通信网发展动态

首先说明西方国家通信网近年发展变迁情况，然后对IP与WDM的结合使用、光数据网的发展、密集波分多路的应用和光网中通路的保护4个主要方面作了具体说明。     

GPRS业务模型和无线网络的研究

根据GPRS业务及业务发展情况，对GPRS业务模型进行深入研究，并对GPRS无线网络进行了更深入的探讨。     

Position synchronization of multiple motion axes with adaptive coupling control

A new control approach to position synchronization of multiple motion axes is developed, by incorporating cross-coupling technology into adaptive control architecture. The control strategy is to stabilize position tracking of each axis while synchronizing its motion with other axes’ motions so that differential position errors amongst axes converge to zero. The proposed adaptive controller and parameter estimator employ coupling control by feeding back position errors and differential position errors, and have been realized to guarantee asymptotic convergence to zero of both position and synchronization errors. Simulations conducted on a multi-axis motion control system demonstrate the effectiveness of the method.     

Extracting Modes of Constrained Structure with Elastic Supports from Free Test Data

The dynamic flexibility (DF) and improved dynamic flexibility (IDF) methods can be applied to extract constrained structural modes from free-free modal test data. The residual flexibility method is also good for boundaries of constrained structure with rigid supports. Under elastic support boundary conditions both the DF and residual flexibility methods cannot produce accurate results. This paper expands the previously published IDF method to become a more general approach for structural design engineers. A new method called the general dynamic flexibility (GDF) method has been developed in this paper to extract constrained structural modes from free test data. The GDF method can always be applied as follows: (1) when the boundary support stiffness is very stiff, the GDF method can accurately obtain results from rigid support as by Liu et al. in 2001 and Zhang and Wei in 2003; (2) when the support stiffness is soft, the present method can produce results similar to those free-free modal parameters measured by hanging structures using rubber band; (3) when the support stiffness is zero, the method can reproduce true free-free modal parameters; and (4) when the support stiffness has any finite values, the GDF method can also achieve satisfactory results for engineering use. The algorithm included in the GDF method converges rapidly and is numerically stable in the analysis. This feature is very practical for many engineering applications for using the GDF method.     

Real-Time Three-Dimensional Occupancy Grid Modeling for the Detection and Tracking of Construction Resources

Awareness of the construction environment can be improved by automatic three-dimensional (3D) sensing and modeling of job sites in real time. Commercially available 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model dynamic objects in real time in an environment comprised of moving humans, equipment, and materials. Emerging prototype video range cameras offer an alternative by facilitating affordable, wide field of view, dynamic object tracking at frame rates better than 1?Hz (real time). This paper describes a methodology to model, detect, and track the position of static and moving objects in real time, based on data obtained from video range cameras. Experiments with this technology have produced results that indicate that video rate 3D data acquisition and analysis of construction environments can support effective modeling, detection, and tracking of project resources. This approach to job site awareness has inherent value and broad application. In combination with effective management practices and other sensing techniques, this technology has the potential to significantly improve safety on construction job sites.     

高能多脉冲超正压射孔技术

高能多脉冲超正压射孔技术是一项利用高能燃料的燃烧在目的层产生压力的超正压射孔或增产新技术。主要介绍了该技术的基本原理和装置的结构设计，并给出了该技术在国内一些油田的应用实例。实例说明，该技术是一项非常好的完井或增产新技术。     

复合布尔函数中含某单乘积项的快速判定算法

引入了布尔函数的基本积、单乘积项等概念，通过实例剖析了复合布尔函数中是否含某一单乘积项的一般判定方法，在该基础上提出了一种快速判定途径，并给出了快速判定算法的具体描述，同时对算法进行了实验，结果表明该算法快速有效。     

Generation and selection of likely interpretations during plan recognition in task-oriented consultation systems

This paper presents a mechanism which infers a user's plans from his/her utterances by directing the inference process towards the more likely interpretations of a speaker's statements among many possible interpretations. Our mechanism uses Bayesian theory of probability to assess the likelihood of an interpretation, and it complements this assessment by taking into consideration two aspects of an interpretation: its coherence and its information content. The coherence of an interpretation is determined by the relationships between the different statements in the discourse. The information content of an interpretation is a measure of how well defined the interpretation is in terms of the actions to be performed on the basis of this interpretation. This measure is used to guide the inference process towards interpretations with higher information content. The information content of an interpretation depends on the specificity and the certainty of the inferences in it, where the certainty of an inference depends on the knowledge on which the inference is based. Our mechanism has been developed for use in task-oriented consultation systems. The particular domain that we have chosen for exploration is that of travel booking.     

CIMS环境中的数据模式转换

本文在分析CIMS环境中数据模式冲关类型的基础上，提出一种互连数据库系统模式结构，论述了在异构数据库集成中解决模式冲突的基本方法．在这种方法体系中，不需要建立整个企业的全局数据模式，各局部DBA以简单的方式定义应用所需的模式变换，系统根据这种定义自动完成各种转换，使用户看到的模式和数据结果与应用要求的一致．