Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

不规则I型和L型横截面形状薄壁杆件的横向弯曲稳定分析

根据势能驻值原理,采用转换B3样条函数模拟杆件横截面的翘曲位移场,文[8]提出了用于分析在横向荷载作用下薄壁杆件稳定问题的样条有限杆元法。方法适用于任意横截面形状和任意边界条件的薄壁杆件,考虑了杆壁中面上剪切变形的影响,能很好地描述剪力滞后现象。本文讨论了不规则I型截面简支梁和L型截面简支梁的屈曲分析,数值算例的结果表明了方法的灵活性、精确性和有效性。     

手势语言识别的神经网络方法

提供了一种用于人机交互（HCI）的手势语言可视化识别方法。该方法包括用于几种控制命令的手势的探测、分割、特征提取及识别，第一步的处理都用到了神经网络方法，像肤色探测、主元分析（PCA）以及在编码识别。实验结果显示正确识别率高达94％。     

对投入与产出优化分析方法的应用探讨

介绍投入与产出优化分析的一些基本概念和计算方法 ,并结合实际 ,举例说明投入与产出的优化分析方法具体应用     

长庆上古生界气层CO2增能压裂工艺

长庆上古气藏物性差,压力系数低,水锁伤害大,采用常规水力压裂,入井液返排困难,气井产量低。在储层改造地质研究的基础上,通过对CO2泡沫压裂技术进行室内攻关,引进开发了CO2泡沫压裂酸性交联技术,优化了CO2泡沫方案设计及现场施工工艺,配套了CO2增能压裂工艺技术。经过现场应用,充分说明了CO2增能压裂是一项行之有效的工艺技术,对于提高单井产量和长庆气田整体开发水平都是有益的。     

双模轮胎硫化机结构的优化设计

我们在双模轮胎硫化机结构的优化设计中,提出了一种ANSYS与导重准则相结合的优化方法。该方法收敛快,一般只需约5至7次优化迭代计算即可得到十分显著的优化效果,大大提高了优化效率与设计质量。     

辽宁省2000年夏季干旱分析

本文针对辽宁省2000年发生的干旱,从大气环流、气候、降水、径流、水资源量等方面,较系统地阐述了各因素的发展规律、特点及物理成因。采用降水指标、径流指标、受旱率进行干旱程度分析。评价出辽宁省2000年干旱为特大干旱。     

微机综合自动化在农网建设和改造中的应用

介绍微机综合自动化在农网改造和建设中应用的优点及自动化系统的组成、特点、结构、功能等 ,分析了广西农网改造和建设中选用微机综合自动化系统时应注意的问题。     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.